A Phenomenological Model for Tool Wear in Friction Stir Welding of Metal Matrix Composites
Source abstract
Abstract
Friction stir welding (FSW) of metal matrix composites (MMCs) is advantageous because the solid-state nature of the process precludes formation of deleterious intermetallic phases which accompany melting. FSW of MMCs is complicated by rapid and severe wear of the welding tool, a consequence of contact between the tool and the much harder abrasive reinforcement which gives the workpiece material its enhanced strength. The current article demonstrates that Nunes’s rotating plug model of material flow in FSW, which has been successfully applied in many other contexts, can also help us understand wear in FSW of MMCs. An equation for predicting the amount of wear in this application is developed and compared with experimental data. This phenomenological model explains the relationship between wear and FSW process parameters documented in previous studies.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. W.M. Thomas, E.D. Nicholas, J.C. Needham, M.G. Murch, P. Temple-Smith, and C.J. Dawes: US Patent 5460317, 24 Oct 1995.
2. D. Storjohann, O.M. Barabash, S.S. Babu, S.A. David, P.S. Sklad, and E.E. Bloom: “Fusion and Friction Stir Welding of Aluminum Metal Matrix Composites.” Metallurgical and Materials Transactions: A: Physical Metallurgy and Materials Science 36A (2005): 3237-3247.10.1007/s11661-005-0093-4 ↗
3. T.J. Prater, A.M. Strauss, G.E. Cook, C. Machemehl, P. Sutton, and C.D. Cox. “Statistical modeling and Prediction of Wear in Friction Stir Welding of a Metal Matrix Composite (Al 350/SiC/20p).” Journal of Manufacturing and Technology Research 2 (2010): 1-13.
4. T.C. Prater, C. Cox, B. Gibson, A. Strauss, and G. Cook: Proc. Inst. Mech. Eng. C: J. Mech. Eng. Sci., Published online 21 Feb 2012.
5. Prado, R.A., L.E. Murr, K.F. Soto and J.C. McClure. “Self-optimization in tool wear for friction-stir welding of Al 6061+20 pct Al2O3 MMC.” Materials Science and Engineering 349 (2003): 156-165.10.1016/S0921-5093(02)00750-5 ↗
6. Prado, R.A., L.E. Murr, D.J. Shindo and K.F. Soto. “Tool wear in the friction-stir welding of aluminum alloy 6061+Al2O3: a preliminary study.” Scripta materialia 45 (2001): 75-80.10.1016/S1359-6462(01)00994-0 ↗
7. A.C. Nunes, E.I. Bernstein, and J.C. McClure: A Rotating Plug Model for Friction Stir Welding, 81st American Welding Society Convention, Chicago, IL, 2000.
8. A. Nunes: unpublished NASA report, 2010.
9. J. Querin: Ph.D. Dissertation, Mississippi State University, 2010.
10. Rabinowicz, Ernest. Friction and Wear of Materials. New York: John Wiley & Sons, 1965.
11. Shercliff, H.R. and P.A. Colegrove. “Development of Trivex friction stir welding tool part I: two-dimensional flow modelling and experimental validation.” Science and Technology of Welding and Joining 9 (2004): 345-351.10.1179/136217104225021670 ↗
12. Schmidt, H., J Hattel and J Wert. “An analytical model for the heat generation in friction stir welding.” Modelling and Simulation in Materials Science and Engineering 12 (2004): 143-157.10.1088/0965-0393/12/1/013 ↗
13. Raghulapadu, J.K., J. Peddieson, G.R. Buchanan, A.C. Nunes. “A Rotating Plug Model of Friction Stir Welding Heat Transfer.” Heat Transfer Engineering 29 (2008): 321-334.10.1080/01457630701758187 ↗
14. T. Prater, G.E. Cook, A.M. Strauss, J. Davidson, and M. Howell: 8th International Conference on Trends in Welding Research, Pine Mountain, GA, 2008.
15. A.P. Reynolds, T.U. Seidel, and M. Simonsen: 1st International Symposium on Friction Stir Welding, Rockwell Science Center, Thousand Oaks, CA, 1999, June 14–16.