Comparison and Extension of Free Dendritic Growth Models through Application to a Ag-15 Mass Pct Cu Alloy
Source abstract
Abstract
The formulations of existing free dendritic growth models were compared, and an extended model was proposed that employs a subregular solution model to compute the driving force for dendritic growth without Henrian restrictions. These models were also applied to a Ag-15 mass pct Cu alloy to numerically compare their predictions. Models that address only the thermal, solutal, and curvature supercoolings do not properly account for the interface kinetics, even with modifications with the kinetic partition coefficient and liquidus slope. It is only in models that account for the interfacial driving force, −ΔG *, that the kinetic supercooling is properly addressed. All of the models in comparison yield numerically similar predictions for the solutal growth regime, but models that employ the kinetic partition coefficient and liquidus slope, but do not address the interfacial driving force, fail to correctly describe the thermal control regime. The solutal-to-thermal transition is characterized by a rapid increase of interfacial driving force, which causes the tip temperature T * to increase with increasing growth rate V. The criterion for the transition stage is given as $$ d\ln( - \Delta G^* )/d\ln\,V >1 $$ .
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · nanoparticles nucleation surface interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. D.E. Temkin: Sov. Phys.-Crystallogr., 1965, vol. 7, pp. 354–57
2. R. Trivedi, W.A. Tiller: Acta Metall., 1978, vol. 25, pp. 679–8710.1016/0001-6160(78)90018-4 ↗
3. J. Lipton, M.E. Glicksman, W. Kurz: Mater. Sci. Eng., 1984, vol. 65, pp. 57–6310.1016/0025-5416(84)90199-X ↗
4. J. Lipton, M.E. Glicksman, W. Kurz: Metall. Trans. A, 1987, vol. 18, pp. 341–4510.1007/BF02825716 ↗
5. G.P. Ivantsov: Dokl. Akad. Nauk, USSR, 1947, vol. 58, pp. 56–57
6. W. Kurz, D.J. Fisher: Acta Metall., 1981, vol. 29, pp. 11–2010.1016/0001-6160(81)90082-1 ↗
7. J. Lipton, W. Kurz, R. Trivedi: Acta Metall., 1987, vol. 35 (4), pp. 957–6410.1016/0001-6160(87)90174-X ↗
8. R. Trivedi, W. Kurz: Acta Metall., 1987, vol. 34 (8), pp. 1663–7010.1016/0001-6160(86)90112-4 ↗
9. R. Trivedi, J. Lipton, W. Kurz: Acta Metall., 1987, vol. 35 (4), pp. 965–7010.1016/0001-6160(87)90175-1 ↗
10. M.J. Aziz: J. Appl. Phys, 1982, vol. 53 (2), pp. 1158–6810.1063/1.329867 ↗
11. W.J. Boettinger, S.R. Coriell, R. Trivedi: in Rapid Solidification Processing: Principles and Technologies IV, R. Mehrabian, P.A. Parish eds., Claitor’s Publishing Division, Baton Rouge, LA, 1988, pp. 13–25
12. C. Baker, J.W. Cahn: Solidification, ASM, Metals Park, OH, 1971, pp. 23–58
13. D. Turnbull: J. Phys. Chem., 1962, vol. 66, pp. 609–1310.1021/j100810a009 ↗
14. A.G. DiVenuti, T. Ando: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 3047–5610.1007/s11661-998-0212-0 ↗
15. M.J. Aziz, T. Kaplan: Acta Metall., 1988, vol. 36, pp. 2335–4410.1016/0001-6160(88)90333-1 ↗
16. R. Abbaschian, W. Kurz: Solidification Processes and Microstructures: a Symp. in Honor of Wilffred Kurz, M. Rappaz, C. Beckermann, R. Trivedi, eds., TMS, Warrendale, PA, 2004, pp. 314–24
17. G.-X. Wang, V. Prasad, S. Sampath: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 735–4610.1007/s11661-000-0015-4 ↗
18. Y. Sasajima, M. Ichimura: J. Jpn. Inst. Light Met., 2003, vol. 53 (2), pp. 67–7310.2464/jilm.53.67 ↗
19. D.M. Matson, J. Kertz Yurko, and R.W. Hyers: in Solidification Processes and Microstructures—a Symp. in Honor of Rohit Trivedi, M. Rappaz, C. Beckermann, and R. Trivedi, TMS, Warrendale, PA, 2004, pp. 205–10
20. S.-G. Kim, S.-H. Shin, T. Suzuki, T. Umeda: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 2815–26.10.1007/BF02649231 ↗
21. M. Suzuki, T.J. Piccone, M.C. Flemings, H.D. Brody: Metall. Trans. A, 1991, vol. 22A, pp. 2761–6810.1007/BF02851370 ↗
22. X.R. Liu, C.D. Cao, B. Wei: Scripta Mater., 2002, vol. 46, pp. 13–1810.1016/S1359-6462(01)01188-5 ↗
23. P.K. Galenko, D.A. Danilov: J. Cryst. Growth, 1999, vol. 197, pp. 992–100210.1016/S0022-0248(98)00977-4 ↗
24. G.P. Ivantsov: Growth of Crystals, Consultants Bureau, New York, NY, 1958, vol. 1, pp. 76–85
25. G.P. Ivantsov: in Growth of Crystals, Consultants Bureau, New York, NY, 1962, vol. 3, pp. 53–60
26. S. Langer, H. Müller-Krumbhaar: Acta Metall., 1978, vol. 26, pp. 1681–8710.1016/0001-6160(78)90078-0 ↗
27. J.S. Langer, H. Müller-Krumbhaar: Acta Metall., 1978, vol. 26, pp. 1689–9510.1016/0001-6160(78)90079-2 ↗
28. J.S. Langer, H. Müller-Krumbhaar: Acta Metall., 1978, vol. 26, pp. 1697–0810.1016/0001-6160(78)90080-9 ↗
29. W. Loser, D.M. Herlach: Metall. Trans. A, 1992, vol. 23A, pp. 1585–9110.1007/BF02647340 ↗
30. K. Eckler, R.F. Cochrane, D.M. Herlach, B. Feuerbacher, M. Jurisch: Phys. Rev. B, 1992, vol. 45 (9), pp. 5019–2210.1103/PhysRevB.45.5019 ↗
31. T. Suzuki, K. Sakuma: JSIJ Int., 1995, vol. 35 (2), pp. 178–82
32. S. Önel: Ph.D. Thesis, Northeastern University, Boston, MA, 2006
33. D.R. Gaskell: Introduction to the Thermodynamics of Materials, 4th ed., Taylor & Francis, New York, NY, 2003, p. 252
34. J.L. Murray: Metall. Trans. A, 1984, vol. 15A, pp. 261–6810.1007/BF02645110 ↗
35. P. Subramanian, J.H. Perepezko: J. Phase Equilibria, 1993, vol. 14 (1), pp. 62–7510.1007/BF02652162 ↗
36. C.T. Heycock, F.H. Neville: Phil. Trans. R. Soc. (London) A, 1897, vol. 189, pp. 25–6910.1098/rsta.1897.0002 ↗
37. M. Binnewies and E.M. Milke: Thermochemical Data of Elements and Compounds, Wiley-VCH, New York, NY, 1999, pp. 12 and 43410.1002/9783527619818 ↗
38. A. Karma, A. Sarkissian: Phys. Rev. Let., 1962, vol. 68, pp. 2616–1910.1103/PhysRevLett.68.2616 ↗
39. M. Carrard, M. Germaud, M. Zimmermann, W. Kurz: Acta Metall. Mater., 1992, vol. 40, pp. 983–9610.1016/0956-7151(92)90076-Q ↗
40. W. Boettinger, M.J. Aziz: Acta Metall., 1989, vol. 37 (12), pp. 3379–9110.1016/0001-6160(89)90210-1 ↗