Mechanical and Thermal Properties of Hot-Pressed ZrB2-SiC Composites
Source abstract
Abstract
ZrB2-SiC composites were hot pressed at 2473 K (2200 °C) with graded amounts (5 to 20 wt pct) of SiC and the effect of the SiC addition on mechanical properties like hardness, fracture toughness, scratch and wear resistances, and thermal conductivity were studied. Addition of submicron-sized SiC particles in ZrB2 matrices enhanced mechanical properties like hardness (15.6 to 19.1 GPa at 1 kgf), fracture toughness (2 to 3.6 MPa(m)1/2) by second phase dispersion toughening mechanism, and also improved scratch and wear resistances. Thermal conductivity of ZrB2-SiC (5 wt pct) composite was higher [121 to 93 W/m K from 373 K to 1273 K (100 °C to 1000 °C)] and decreased slowly upto 1273 K (1000 °C) in comparison to monolithic ZrB2 providing better resistance to thermal fluctuation of the composite and improved service life in UHTC applications. At higher loading of SiC (15 wt pct and above), increased thermal barrier at the grain boundaries probably reduced the thermal conductivity of the composite.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. J. K. Sonber, and A. K. Suri: Adv. Appl. Ceram., 2011, vol 110, pp. 321-334.10.1179/1743676111Y.0000000008 ↗
2. S-Q. Guo: J. Euro. Ceram. Soc., 2009, vol 29, pp. 995-1011.10.1016/j.jeurceramsoc.2008.11.008 ↗
3. F. Monteverde, and A. Bellosi: J. Electrochem. Soc., 2003, vol 150, pp. B552-B559.10.1149/1.1618226 ↗
4. E. Wuchina, E. Opila, M. Opeka, W. Fahrenholtz, and I. Talmy: Electrochem. Soc. Interface, 2007, vol 16, pp. 30-36.10.1149/2.F04074IF ↗
5. H. O. Pierson, Handbook of refractory carbides and nitrides, Noyes Publications, Westwood, 1996, pp. 55-78.10.1016/B978-081551392-6.50005-2 ↗
6. W. G. Fahrenholtz, G. E. Hilmas, I. G. Talmy, and J. A. Zaykoski: J. Am. Ceram. Soc., 2007, vol 90, pp. 1347-1364.10.1111/j.1551-2916.2007.01583.x ↗
7. K. Upadhya, J. M Yang, and W. P. Hoffmann: Am. Ceram. Soc. Bull., 1997, vol 76, pp. 51-56.
8. A. Paul, D.D. Jayaseelan, S. Venugopal, E. Z-Solvas, and J. Binner: J. Am. Ceram. Soc Bull., 2012, vol 91, pp. 22-29.
9. E. Sani, L. Mercatelli, D. Jafrancesco, J.L. Sans, and D. Sciti: J. Eur. Opt. Soc., 7 (2012)12052 (5p).10.2971/jeos.2012.12052 ↗
10. C.-W. Li, Y.-M. Lin, M.-Fu Wang, and C. A. Wang: Front. Mater. Sci. China, 2010, vol 4, pp. 271-275.10.1007/s11706-010-0084-2 ↗
11. A. K. Kuriakose, and J. L. Margrave: J. Electrochem. Soc., 1964, vol 111, pp. 827-831.10.1149/1.2426263 ↗
12. M. Donohue, C. Carpenter, and N. Orlovskaya: NATO Science for Peace and Security Series B: Physics and Biophysics, Boron rich chapter, 2011, pp. 287–302.10.1007/978-90-481-9818-4_19 ↗
13. L. Pienti, D. Sciti, L. Silvestroni, and S. Guicciardi: Materials, 2013, vol 6, pp. 1980-1993.10.3390/ma6051980 ↗
14. D. Sciti, L. Silvestroni, G. Saccone, D. Alfano: Mater. Chem. Phys., 2013, vol 137, pp. 834–842.10.1016/j.matchemphys.2012.09.071 ↗
15. F. Yang, X. Zhang, J. Han, and S. Du: Mater. Des., 2008, vol 29, pp. 1817–1820.10.1016/j.matdes.2008.03.011 ↗
16. S. Kim, J. M. Cha, S. M. Lee, Y. Sukoh, H. Kim, and B. K. Jang: Ceram. Inter., 2014, vol 40, pp. 3477-3483.10.1016/j.ceramint.2013.09.082 ↗
17. F. Monteverde: Appl. Phys. A- Mater. Sci. Proce., 2006, vol 82, pp. 329-337.10.1007/s00339-005-3327-9 ↗
18. A. Rezaie, W.G. Fahrenholtz, and G.E. Hilmas: J. Mater. Sci., 2007, vol 42, pp. 2735-2744.10.1007/s10853-006-1274-2 ↗
19. J.W. Zimmermann, G. E. Hilmas, W. G. Fahrenholtz, R. B. Dinwiddie, W.D. Porter, and H. Wang: J. Am. Ceram. Soc., 2008, vol 91, pp. 1405–1411.10.1111/j.1551-2916.2008.02268.x ↗
20. D. D. Jayaseelan, E. Z. Solvas, P. Brown, and W. E. Lee: J. Am. Ceram. Soc., 2012, vol 95, pp. 1247-1254.10.1111/j.1551-2916.2011.05032.x ↗
21. M. M. Opeka, I.G Talmy, and J. A. Zaykoski: J. Mater. Sci., 2004, vol 39, pp. 5887-5909.10.1023/B:JMSC.0000041686.21788.77 ↗
22. F. Monteverde, and A. Bellosi: Adv. Eng. Mater., 2004, vol 6, pp. 331-336.10.1002/adem.200400016 ↗
23. Z.Y. Pan, Y. Wang, X.W. Li, C. Wang and Z.W. Zou: J. Therm. Spray Tech. 2012, vol 21, pp. 95-1009.10.1007/s11666-012-9800-z ↗
24. M. S. Datta, A. K. Bandyopadhyay, and B. Chaudhuri: Bull. Mater. Sci., 2002, vol 25, pp. 181–189.10.1007/BF02711151 ↗
25. S. Prochazka, and R. M. Scanlan: J. Am. Ceram. Soc., 1975, vol 58, pp.72-76.10.1111/j.1151-2916.1975.tb18990.x ↗
26. M. Ikegami, S. Guo, Y. Kagawa: Ceram. Inter., 2012, vol 38(1), pp. 769-774.10.1016/j.ceramint.2011.08.003 ↗
27. M.S. Asl and M.G. Kakroudi: Ceram. Int., 2014, vol. 40, pp. 15273–81.10.1016/j.ceramint.2014.07.023 ↗
28. G.R. Anstis, P. Chantikul, B.R. Lawn, and D. B. Marshall: J. Am. Ceram. Soc., 1981, vol 64, pp. 533-538.10.1111/j.1151-2916.1981.tb10320.x ↗
29. A. Iost, and R. Bigot: J. Mater. Sci., 1996, vol 31, pp. 3573-3577.10.1007/BF00360764 ↗
30. S. Chakraborty, D. Debnath, A.R. Mallick, and P.K. Das, Int. J. Refrac. Met. Hard Mater., 2014, vol 46, pp. 35-42.10.1016/j.ijrmhm.2014.05.004 ↗
31. J. Fang, H. M. Chan, and M. P. Harmer: Mater. Sci. Eng: A, 1995, vol 195, pp.163–167.10.1016/0921-5093(94)06515-2 ↗
32. J.P. Singh, H. Baba, S. Hayashi, and A. Suzuki: Proc. 21st Ann. Conf. Compos. Adv. Ceram. Mater. Struct.: A: Ceram. Eng. Sci. Proc., 2008, 18, Chapter 28.
33. Q. Liu, W. Han, X. Zhang, S. Wang and J. Han: Mater. Lett., 2009, vol 63, pp. 1323-1325.10.1016/j.matlet.2009.02.054 ↗
34. W.M. Guo, Z.G. Yang, and G.J. Zhang: Ceram. Int., 2013, vol. 39, pp. 7229–33.10.1016/j.ceramint.2013.01.053 ↗
35. C.B. Ponton, and R.D. Rawlings: Mater. Sci. Tech., 1989, vol 5, pp. 865-872.10.1179/mst.1989.5.9.865 ↗
36. C.B. Ponton, and R.D. Rawlings: Mater. Sci. Tech., 1989, vol 5, pp. 961-976.10.1179/mst.1989.5.10.961 ↗
37. J. Mukherjee, S. Chakraborty, S. Chakravarty, A. Ranjan, and P.K. Das: Ceram. Inter., 2014, vol 40, pp. 6639-6645.10.1016/j.ceramint.2013.11.121 ↗
38. D. C. Cranmer: Tribo. Trans., 1988, vol 31, pp. 164-173.10.1080/10402008808981812 ↗
39. T. N. Ying, M. C. Shen, Y. S. Wang, and S. M. Hsu: Tribo. Trans., 1997, vol 40, pp. 685-693.10.1080/10402009708983709 ↗
40. J. F. Archard: J. Appl. Phy., 1953, vol 24, pp. 981-988.10.1063/1.1721448 ↗
41. M. Gasch, S. Johnson, and J. Marschall: J. Am. Ceram. Soc., 2008, vol 91, pp. 1423-1432.10.1111/j.1551-2916.2008.02364.x ↗
42. W. Li, L. Li, T. Cheng, C. Zhang, and D. Fang: Phys. Scr., 2012, vol 86, pp. 055402.10.1088/0031-8949/86/05/055402 ↗
43. W. Tian, and R. Yang: Comp. Model. Engg. Sci., 2008, vol 24, pp. 123-141.
44. G. Anirthan, A. Udaya Kumar, and M. Balsubramanian: Ceram. Int., 2011, vol 37, pp. 423–26.10.1016/j.ceramint.2010.09.003 ↗
45. E. Z-Solvas, D.D. Jayaseelan, P.M. Brown, and W.E. Lee: J. Euro. Ceram. Soc., 2013, vol 33, pp. 3467-3472.10.1016/j.jeurceramsoc.2013.06.009 ↗
46. M. Patel, B. V. V. Prasad, and V. Jayaram: J. Euro. Ceram. Soc., 2013, vol 33, pp. 615-1624.10.1016/j.jeurceramsoc.2013.03.006 ↗
47. J. W. Lawson, M. S. Daw, and C. W. Bauschlicher: J. Appl. Phys., 2011, vol 110, pp. 083507-4.10.1063/1.3647754 ↗
48. G.A. Slack: J. Phys. Chem. Solids, 1973, vol 34, pp. 321-335.10.1016/0022-3697(73)90092-9 ↗
49. L. Zhang, D.A. Pejaković, J. Marschall, and M. Gasch: J. Am. Ceram. Soc., 2011, vol 94, pp. 2562-2570.10.1111/j.1551-2916.2011.04411.x ↗
50. M. Patel, V.V. B. Prasad, and V. Jayaram: J. Euro. Ceram. Soc., 2013, vol 33(10), pp. 1615-1624.10.1016/j.jeurceramsoc.2013.03.006 ↗
51. S. Kima, J.-M. Chae, S.-M. Lee, Y.-S. Oh, H.-T. Kim, and B.-K. Jang: Ceram. Int. 2014, vol 40, pp. 3477–83.10.1016/j.ceramint.2013.09.082 ↗
52. D. S. Smith, S. Fayette, S. Grandjean, C. Martin, R. Telle, and T. Tonnessen: J. Am. Ceram. Soc., 2003, vol 86, pp. 105-111.10.1111/j.1151-2916.2003.tb03285.x ↗