Microstructural Characterization and Properties Evaluation of Ni-Based Hardfaced Coating on AISI 304 Stainless Steel by High Velocity Oxyfuel Coating Technique
Source abstract
Abstract
The present study concerns a detailed investigation of microstructural evolution of nickel based hardfaced coating on AISI 304 stainless steel by high velocity oxy-fuel (HVOF) deposition technique. The work has also been extended to study the effect of coating on microhardness, wear resistance and corrosion resistance of the surface. Deposition has been conducted on sand blasted AISI 304 stainless steel by HVOF spraying technique using nickel (Ni)-based alloy [Ni: 68.4 wt pct, chromium (Cr): 17 wt pct, boron (B): 3.9 wt pct, silicon (Si): 4.9 wt pct and iron (Fe): 5.8 wt pct] of particle size 45 to 60 μm as precursor powder. Under the optimum process parameters, deposition leads to development of nano-borides (of chromium, Cr2B and nickel, Ni3B) dispersion in metastable and partly amorphous gamma nickel (γ-Ni) matrix. The microhardness of the coating was significantly enhanced to 935 VHN as compared to 215 VHN of as-received substrate due to dispersion of nano-borides in grain refined and partly amorphous nickel matrix. Wear resistance property under fretting wear condition against WC indenter was improved in as-deposited layer (wear rate of 4.65 × 10−7 mm3/mm) as compared to as-received substrate (wear rate of 20.81 × 10−7 mm3/mm). The corrosion resistance property in a 3.56 wt pct NaCl solution was also improved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · High-Temperature Coating Behaviors · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. K.G. Brickner: Source Book on Stainless Steels, American Society for Metals, Metals Park, OH, 1976, p. 25.
2. M.G. Fontana: Corrosion Engineering, McGraw-Hill, New York, 1987, p. 71.
3. K.G. Budinski: Surface Engineering for Wear Resistance, Prentice Hall, Upper Saddle River, NJ, 1988.
4. T.W. Clyne and P.J. Withers: An Introduction to Metal Matrix Composites, Cambridge University Press, Cambridge, 1993.10.1017/CBO9780511623080 ↗
5. S. Kalpakjian and S.R. Schmid: Manufacturing Engineering and Technology, 4th ed., Prentice Hall, Upper Saddle River, NJ, 2000.
6. J. Dutta Majumdar and I. Manna: Sadhana, 2003, vol. 28, pp. 495–562.10.1007/BF02706446 ↗
7. J. Dutta Majumdar and L. Li: Mater. Lett., 2010, vol. 64, pp. 1010–12.10.1016/j.matlet.2009.12.007 ↗
8. J. Dutta Majumdar, B. Ramesh Chandra, D. Biswas, B.L. Mordike, and I. Manna: Lasers Eng., 2006, vol. 16, pp. 333–48.
9. J. Dutta Majumdar, B. Ramesh Chandra, A.K. Nath, and I. Manna: Surf. Coat. Technol., 2006, vol. 20, pp. 1236–42.10.1016/j.surfcoat.2006.01.048 ↗
10. J. Dutta Majumdar, B. Ramesh Chandra, and I. Manna: Tribol. Int., 2007, vol. 40, pp. 146–52.10.1016/j.triboint.2006.04.006 ↗
11. L. Pawlowski: The Science and Engineering of Thermal Spray Coatings, 2nd ed., John Wiley & Sons Ltd., Chichester, 2008.10.1002/9780470754085 ↗
12. W.M. Zhao, Y. Wang, L.X. Dong, K.Y. Wu, and J. Xue: Surf. Coat. Technol., 2005, vol. 190, pp. 293–98.10.1016/j.surfcoat.2004.04.057 ↗
13. M.P. Planche, H. Liao, B. Normand, and C. Coddet: Surf. Coat. Technol., 2005, vol. 200, pp. 2465–73.10.1016/j.surfcoat.2004.08.224 ↗
14. M.C Lin, S.L Chang, H.C. Lin, C.H. Yang, and K.M. Lin: Surf. Coat. Technol., 2006, vol. 201, pp. 3193–98.10.1016/j.surfcoat.2006.06.040 ↗
15. T.S. Sidhu, S. Prakash, and R.D. Agrawal: Mater. Sci. Eng. A, 2006, vol. 430, pp. 64–78.10.1016/j.msea.2006.05.099 ↗
16. E.J. Carrasquero, J. Lesage, E.S. Puchi-Cabrera, and M.H. Staia: Surf. Coat. Technol., 2008, vol. 202, pp. 4544–51.10.1016/j.surfcoat.2008.04.040 ↗
17. S. Liu, X. Zheng, and G. Geng: Mater. Des., 2010, vol. 31, pp. 913–17.10.1016/j.matdes.2009.07.034 ↗
18. B.D. Cullity: Elements of X-Ray Diffraction, Addison-Wesley Publishing Company Inc., Philippines, 1967.
19. “Standard Recommended Practice for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion”, Annual Book of ASTM Standards G61, American Society for Testing of Metals, Philadelphia, 1985.
20. J.C. Villegas and L.L. Shaw: Acta Mater., 2009, vol. 57, pp. 5782–95.10.1016/j.actamat.2009.08.005 ↗
21. K. Xu, A. Wang, Y. Wang, X. Dong, X. Zhang, and Z. Huang: Appl. Surf. Sci., 2009, vol. 256, pp. 619–26.10.1016/j.apsusc.2009.06.098 ↗
22. C. Moreau, P. Cielo, M. Lamontagne, S. Dallaire, J.C. Krapez, and M. Vardelle: Surf. Coat. Technol., 1991, vol. 46, p. 173.10.1016/0257-8972(91)90160-X ↗
23. W. Yuping, L. Pinghua, X. Guozhi, H. Junhua, and C. Ming: Mater. Sci. Eng. A, 2006, vol. 430, pp. 34–39.10.1016/j.msea.2006.05.095 ↗
24. A. Tewari, B. Basu, and R.K. Bordia: Acta Mater., 2009, vol. 57, pp. 2080–87.10.1016/j.actamat.2009.01.013 ↗
25. C. Navas, R. Colaço, J. de Damborenea, and R. Vilar: Surf. Coat. Technol., 2006, vol. 200, pp. 6854–62.10.1016/j.surfcoat.2005.10.032 ↗
26. C.R. Das, N. Kumar, S. Dash, P. Chandramohan, M.P. Srinivasan, S.K. Albert, A.K. Tyagi, A.K. Bhaduri, and B. Raj: Tribol. Lett., 2011, vol. 44, pp. 229–35.10.1007/s11249-011-9841-3 ↗
27. A. Määttä, U. Kanerva, and P. Vuoristo: J. Therm. Spray Technol., 2011, vol. 20, pp. 366–71.10.1007/s11666-010-9579-8 ↗
28. W.L. Johnson: Metals Handbook, vol. 2, 10th ed., ASM, Metals Park, OH, pp. 817–18.
29. W.H. Wang, C. Dong, and C.H. Shek: Mater. Sci. Eng. R, 2004, vol. 44, pp. 45–89.10.1016/j.mser.2004.03.001 ↗
30. C. Navas, R. Vijande, J.M. Cuetos, M.R. Fernández, and J. de Damborenea: Surf. Coat. Technol., 2006, vol. 201, pp. 776–85.10.1016/j.surfcoat.2005.12.032 ↗