journal article·2014-09

Response of Phase Transformation Inducing Heat Treatments on Microstructure and Mechanical Properties of Reduced Activation Ferritic-Martensitic Steels of Varying Tungsten Contents

K. S. Chandravathi, Kinkar Laha, C. S. Sasmal, P. Parameswaran, M. Nandagopal, H. M. Tailor, M. D. Mathew, T. Jayakumar, E. Rajendra Kumar

Publisher page

Abstract

Microstructure and mechanical properties of 9Cr-W-0.06Ta Reduced Activation Ferritic-Martensitic (RAFM) steels having various tungsten contents ranging from 1 to 2 wt pct have been investigated on subjecting the steels to isothermal heat treatments for 5 minutes at temperatures ranging from 973 K to 1473 K (700 °C to 1200 °C) (below Ac1 to above Ac3) followed by oil quenching and tempering at 1033 K (760 °C) for 60 minutes. The steels possessed tempered martensite structure at all the heat-treated conditions. Prior-austenitic grain size of the steels was found to decrease on heating in the intercritical temperature range (between Ac1 and Ac3) and at temperatures just above the Ac3 followed by increase at higher heating temperatures. All the steels suffered significant reduction in hardness, tensile, and creep strength on heating in the intercritical temperature range, and the reduction was less for steel having higher tungsten content. Strength of the steels increased on heating above Ac3 and was higher for higher tungsten content. Transmission Electron Microscopy (TEM) investigations of the steels revealed coarsening of martensitic substructure and precipitates on heating in the intercritical temperature range, and the coarsening was relatively less for higher tungsten content steel, resulting in less reduction in tensile and creep strength on intercritical heating. Tensile and creep strengths of the steels at different microstructural conditions have been rationalized based on the estimated inter-barrier spacing to dislocation motion. The study revealed the uniqueness of inter-barrier spacing to dislocation motion in determining the strength of tempered martensitic steels subjected to different heat treatments.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Advanced Materials Characterization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. A. Kohyama, Y. Kohno, K. Asakura and H Kayano: J. Nucl. Mater., 1994, vol. 212- 215, Part 1, pp. 684-89.10.1016/0022-3115(94)90145-7 ↗
2. K.J. Harrelson, S.H. Rou and R.C. Wilcox: J. Nucl. Mater., 1986, vol. 141-143, Part 2, pp. 508-12.10.1016/S0022-3115(86)80091-5 ↗
3. N. Baluc, R. Schaublin, P. Spatig and M. Victoria (2004) Nucl. Fusion, 44, 56–61.10.1088/0029-5515/44/1/006 ↗
4. G.L. Butterworth: J. Nucl. Mater, 1991, vol. 179-181, pp. 135-42.10.1016/0022-3115(91)90028-6 ↗
5. I. Cook, D. Ward and S. Dudarev: Plasma Phys. Control Fusion, 2002, vol. 44, B121–B136.
6. F. Abe, T. Noda, H. Araki, M. Okada: J. Nucl. Sci. Technol., 1994, vol. 31, no.4, pp. 279-92.10.1080/18811248.1994.9735152 ↗
7. A. Kohyama, A. Hishinuma, D.S. Gelles, R.L. Klueh, W. Dietz and K. Ehrlich: J. Nucl. Mater., 1996, vol. 233-237, Part 1, pp.138-47.10.1016/S0022-3115(96)00327-3 ↗
8. S. Saroja, A. Dasgupta, R. Divakar, S. Raju, E. Mohandas, M. Vijayalakshi, K. Bhanu Sankara Rao and B. Raj: J. Nucl. Mater., 2011, vol. 409, Issue 2, pp.131-39.10.1016/j.jnucmat.2010.09.022 ↗
9. R. Mythili, Ravikirana, J. Vanaja, K. Laha, S. Saroja, T. Jayakumar, M.D. Mathew, and E. Rajendra Kumar: Procedia Eng., 2013, vol. 55, pp. 295–99.10.1016/j.proeng.2013.03.257 ↗
10. R. Jayaram and R.L. Klueh: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1551-58.10.1007/s11661-998-0077-2 ↗
11. K.S. Chandravathi, C.S. Sasmal, K. Laha, P. Parmeswaran, M. Nandagopal, D. Vijayanand, M.D. Mathew, T. Jayakumar and E. Rajendra Kumar: J. Nucl. Mater., 2013, vol. 435, Issues 1-3, pp. 128-36.10.1016/j.jnucmat.2012.12.042 ↗
12. K. Laha, K.S. Chandravathi, P. Parameswaran, K. Bhanu Sankara Rao and S.L. Mannan: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 58-68.10.1007/s11661-006-9050-0 ↗
13. K. Laha, K.S. Chandravathi, P. Parameswaran and K. Bhanu Sankara Rao: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 386-97.10.1007/s11661-008-9724-x ↗
14. R. Lindau, A. Moslang, M. Rieth, M. Klimiankou, E. Materna-Morris, A. Alamo, A.A.F. Tavassoli, C. Cayron, A.M. Lancha, P. Fernandez, N. Baluc, R. Schaublin, E. Diegele, G. Filacchioni, J.W. Rensman, B.V.D. Schaaf, E. Lucon and W. Dietz: Fusion Eng. Des., 2005, vol. 75–79, pp. 989–96.10.1016/j.fusengdes.2005.06.186 ↗
15. M. Rieth, M. Schirra, A. Falkenstein, P. Graf, S. Heger, H. Kempe, R. Lindau, and H. Zimmermann: Report FZKA 6911, Forschungszentrum Karlsruhe, Germany, October 2003.
16. A. F. Tavassoli, A. Alamo, L. Bedel, L. Forest, J.-M. Gentzbittel, J.-W. Rensman, E. Diegele, R. Lindau, M. Schirra, R. Schmitt, H.C. Schneider, C. Petersen, A.-M. Lancha, P. Fernandez, G. Filacchioni, M.F. Maday, K. Mergia, N. Boukos, N. Baluc, P. Spatig, E. Alves and E. Lucon: J. Nucl. Mater., 2004, vol. 329–333, pp. 257-62.10.1016/j.jnucmat.2004.04.020 ↗
17. N. Baluc, K. Abe, J.L. Boutard, V.M. Chernov, E. Diegele, S. Jitsukawa, A. Kimura, R.L. Klueh, A. Kohyama, R.J. Kurtz, R. Lässer, H. Matsui, A. Möslang, T. Muroga, G.R. Odette, M.Q. Tran, B. van der Schaaf, Y. Wu, J. Yu and S.J. Zinkle : Nucl Fusion, 2007, vol. 47, no. 10, pp. S696–S717.10.1088/0029-5515/47/10/S18 ↗
18. A. Alamo, J.C. Brachet, A. Castaing, C. Lepoittevin and F. Barcelo: J. Nucl. Mater., 1998, vol. 258–263, Part 2, pp. 1228–35.10.1016/S0022-3115(98)00190-1 ↗
19. K. Laha, S. Saroja, A. Moitra, R. Sandhya, M.D. Mathew, T. Jayakumar and E. Rajendra Kumar: J. Nucl. Mater., 2013, vol. 439, Issue 1-3, pp. 41-50.10.1016/j.jnucmat.2013.03.073 ↗
20. P. Parameswaran, S. Saroja, M. Vijayalakshmi and V.S. Raghunathan: J. Nucl. Mater., 1996, vol. 232, Issue 2-3, pp. 226-32.10.1016/S0022-3115(96)00397-2 ↗
21. M. Matsui, M. Tabuchi, T. Watanabe, K. Kubo, J. Kinugawa and F. Abe: Iron Steel Inst. Jpn. Int., 2001, vol. 41(Suppl), pp. S126-S130.10.2355/isijinternational.41.Suppl_S126 ↗
22. Y. Tsuchida, K. Okamoto, and Y. Tokunaga: Weld. Int. 1996, vol. 10(6), p. 27.10.1080/09507119609549030 ↗
23. S.G. Hong, W.B. Lee and C.G. Park: J. Nucl. Mater., 2001, vol. 288, pp. 202-07.10.1016/S0022-3115(00)00558-4 ↗
24. F. Abe: Mater. Sci. Eng. A 2004; 387-389, pp. 565-69.10.1016/j.msea.2004.01.057 ↗
25. J. Orr, D. Burton and C. Rasche: Proceedings of Conference on ‘The Manufacture and Properties of Steel 91 for the Power Plant and Process Industries, Dusseldorf, Germany, November 1992, ECSC, pp. 1–9.
26. K.S. Chandravathi, K. Laha, K. Bhanu Sankara Rao and S.L. Mannan: Mater. Sci. Technol., 2001, vol. 17, pp.559-65.10.1179/026708301101510212 ↗
27. J. Hald: Steel Res., 1996, vol. 67, pp. 369-74.10.1002/srin.199605503 ↗
28. W.K.C. Jones and P.J. Alberry: Met. Technol., 1977, 11, 557–66.
29. Y. Tsuchida, K. Okamoto and Y. Tokunga: Weld. Int., 1996; vol. 10(6), pp. 27-33.10.1080/09507119609549030 ↗
30. G. Eggeler, A. Ramteke, M. Coleman, B. Chew, G. Peter, A. Burblies, J. Hald, C. Jefferey, J. Rantala, M. Dewhite and R. Mohormann: Int. J. Pressure Vessel Piping, 1994, vol. 60, pp. 237-57.10.1016/0308-0161(94)90125-2 ↗
31. J.M. Vitek and R.L. Klueh: Metall. Trans. A, 1983, vol. 14A, pp. 1047-55.10.1007/BF02670443 ↗
32. D. Li, K. Shinoraki, H. Kuroki, H. Arada and K. Ohishi: Sci. Technol. Weld. Join., 2003, vol. 8(4), pp. 296-302.10.1179/136217103225005453 ↗
33. J.S. Lee, K. Maruyama, I. Nanaka, and T. Ito: in Proceedings of International Conference, J.C. Earthman, S.V. Raj, and R. Viswanathan, eds., TMS, Warrendale, PA, 2005, pp. 139–48.
34. J. Cermak, J. Kucera, B. Million, and J. Krumpos: Kov Maters, 1980, vol. 18, pp. 537–47.
35. U.F. Kocks: J Eng Mater Technol, 1976, vol. 98(1), pp. 76-85.10.1115/1.3443340 ↗
36. H. Mecking and U.F. Kocks, Acta Metall. 1981, vol. 29, pp. 1865-75.10.1016/0001-6160(81)90112-7 ↗
37. Y. Estrin: Unified Constitutive Laws for Plastic Deformation, A.S. Krausz and K. Krausz, eds., Academic Press, New York, 1996, pp. 69–106.10.1016/B978-012425970-6/50003-5 ↗
38. Y. Estrin and H. Mecking: Acta Metall 1984, vol. 32, pp. 57-70.10.1016/0001-6160(84)90202-5 ↗
39. K. Maruyama, K. Sawada and J. Koike: ISIJ Int., 2001, vol. 41(6), pp. 641–53.10.2355/isijinternational.41.641 ↗
40. A.S. Keh, Y. Nakada, and W.C. Leslie: Dislocation Dynamics, A.R. Rosenfield et al., eds., McGraw-Hill, New York, 1968, p. 381.
41. A. Eric Brandes: Smithells Metals Reference Book, 6th ed., Butterworth & Co Ltd., London, 1983.
42. F. Abe, S. Nakazawa, H. Araki, and T. Noda: Metall. Trans. A, 1992, vol. 23A, pp. 469–77.10.1007/BF02801164 ↗
43. V. Foldyna, A. Jakobova, V. Vodarek, and Z. Kubon: D. Coutsouradis et al., eds., Kluwer, Netherlands, 1994, pp. 453–63.
44. V. Dudko, A. Belyakov, D. Molodov and R. Kaibyshev: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 162-72.10.1007/s11661-011-0899-1 ↗
45. I. Fedorova, A. Kipelova, A. Belyakov and R. Kaibyshev: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 128-35.10.1007/s11661-012-1182-9 ↗
46. X. Yu, S.S.Babu, H. Terasaki, Y. Komizo, Y. Yamamoto and M.L. Santella: Acta Mater., 2013, vol. 61, pp. 2194-2206.10.1016/j.actamat.2012.12.040 ↗
47. B.F. Dyson and T.B. Gibbons: Acta Metall., 1987, vol. 35, pp. 2355-69.10.1016/0001-6160(87)90083-6 ↗
48. Monkman F.C., Grant N.J. Proc. Am. Soc. Test. Mater., 1956, vol. 56, pp. 593-620.
49. A. Strang and V. Vodarek: in Materials for Advanced Power Engineering 1998, J. Lecomte-Beckers et al., eds., Forschungszentrum Julich GmbH, Julich, 1998, p. 603.
50. J. Hald and S. Straub: in Materials for Advanced Power Engineering, 1998, J. Lecomte-Beckers et al., eds., Forschungszentrum Julich GmbH, Julich, 1998, p. 155.
51. M. Hattestrand, M. Schwind, and H. O. Andren: in Materials for Advanced Power Engineering 1998, J. Lecomte-Beckers et al., eds., Forschungszentrum Julich GmbH, Julich, 1998, p. 529.