Precipitate Rafting in a Polycrystalline Superalloy During Compression Creep
Source abstract
Abstract
Rafting is an industrially and scientifically important phenomenon for precipitate-strengthened alloys utilized at high temperatures. Although this phenomenon is observed in polycrystalline alloys as well, the literature lacks scientific work on rafting in polycrystals. Scientific work is usually conducted on single-crystal superalloys. Being one of the many polycrystalline nickel-base superalloys, IN738LC has a good high-temperature strength and hot corrosion resistance. Coherency strains between the FCC gamma matrix (γ)- and L12 gamma prime (γ′)-precipitate phase particles mainly provide the high-temperature strength in IN738LC. Conical IN738LC specimens have been aged under compression for various times [24, 192, 480, and 960 hours at 1223 K (950 °C) and 12, 24, 192, and 480 hours at 1323 K (1050 °C)] in order to observe the morphological evolution of the γ′ precipitate microstructure. Dislocations play a determining role in morphological changes. Fingerprints of matrix dislocations in the form of indentations on γ′ precipitates have been identified by scanning electron microscope. Precipitate morphology has become more complex through dissolution/merging as temperature, aging time, and stress have increased. The precipitate morphology has evolved toward rafting at appropriate strain, temperature, and time. Localized slip bands have marked the beginning of rafting. The rafts have been observed at around a 45 deg angle away from the load direction. For higher stress positions, there is a trend toward N-type rafting which is expected of a positive misfit alloy under compression. Rafts eventually have collapsed due to severe creep deformation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Advanced Materials Characterization Techniques · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. R.C. Reed: The Superalloys-Fundamentals and Applications, Cambridge University Press, New York, NY, 2006.10.1017/CBO9780511541285 ↗
2. T. Miyazaki, K. Nakamura, and H. Mori: J. Mater. Sci., 1979, vol. 14 (8), pp. 1827-37.10.1007/BF00551021 ↗
3. C.T. Sims, N.S. Stoloff, and W.C. Hagel (editors): Superalloys II – High- Temperature Materials for Aerospace and Industrial Power, Wiley, New York, NY, 1987.
4. R.A Ricks, A.J. Porter, and R.C. Ecob: Acta Metall., 1983, vol. 31 (1), pp. 43-53.10.1016/0001-6160(83)90062-7 ↗
5. A. Hazotte and J. Lacaze: Scripta Metall., 1989, vol. 23, pp. 1877-82.10.1016/0036-9748(89)90475-4 ↗
6. S.V. Prikhodko and A.J. Ardell: Acta Mater., 2003, vol. 51 (17), pp. 5021-36.10.1016/S1359-6454(03)00328-8 ↗
7. J. Svoboda and P. Lukáš: Acta Mater., 1996, vol. 44 (6), pp. 2557-65.10.1016/1359-6454(95)00349-5 ↗
8. M. Doi, Mater. Trans., 1992, vol. 33 (7), pp. 637-49.10.2320/matertrans1989.33.637 ↗
9. H. Mughrabi: Mater. Sci. Technol., 2009, vol. 25 (2), pp. 191-204.10.1179/174328408X361436 ↗
10. J. Chang and S.M. Allen: J. Mater. Res., 1991, vol. 6 (9), pp. 1843-55.10.1557/JMR.1991.1843 ↗
11. A.F. Giamei, D.D. Pearson, and D.L. Anton: Mat. Res. Soc. Symp. Proc., 1985, vol. 39, pp. 293-308.10.1557/PROC-39-293 ↗
12. J. Li and R.P. Wahi: Acta Metall. Mater., 1995, vol. 43 (2), pp. 507-17.10.1016/0956-7151(94)00252-D ↗
13. T. Hino, T. Kobayashi, Y. Koizumi, H. Harada, and T. Yamagata: Superalloys 2000 (Ninth International Symposium), Champion, PA, The American Society for Metals, 2000, pp. 729–36.10.7449/2000/Superalloys_2000_729_736 ↗
14. M. Veron, Y. Bréchet, and F. Louchet: Acta Mater., 1996, vol. 44 (9), pp. 3633-41.10.1016/1359-6454(96)00011-0 ↗
15. S.G. Tian, C.R. Chen, J.H. Zhang, H.C. Yang, X. Wu, Y.B. Xu, and Z.Q. Hu: Mater. Sci. Technol., 2001, vol. 17 (6), pp. 736-44.10.1179/026708301101510474 ↗
16. J.Y. Buffiere and M. Ignat: Acta Metall. Mater., 1995, vol. 43 (5), pp. 1791-97.10.1016/0956-7151(94)00432-H ↗
17. W. Wu, Y. Guo, G. Dui, and Y. Wang: Comp. Mater. Sci., 2008, vol. 44 (2), pp. 259-64.10.1016/j.commatsci.2008.03.022 ↗
18. S. Socrate and D. M. Parks: Acta Metall. Mater., 1993, vol. 41 (7), pp. 2185-2209.10.1016/0956-7151(93)90389-A ↗
19. K. Tanaka, T. Ichitsubo, K. Kishida, H. Inui, and E. Matsubara: Acta Mater., 2008, vol. 56 (15), pp. 3786-90.10.1016/j.actamat.2008.04.014 ↗
20. A. Epishin, T. Link, and G. Nolze: J. Microsc., 2007, vol. 228, pp. 110–17.10.1111/j.1365-2818.2007.01831.x ↗
21. A. Bauer, S. Neumeier, F. Pyczak, R.F. Singer, and M. Goken: Mater. Sci. Eng. A, 2012, vol. 550, pp. 333-41.10.1016/j.msea.2012.04.083 ↗
22. Y. Zhou, Z. Zhang, Z. H. Zhao, and Q. P. Zhong: Mater. Sci. Technol., 2012, vol. 28 (8), pp. 1018-21.10.1179/1743284712Y.0000000037 ↗
23. N. Miura, K. Nakata, M. Miyazaki, Y. Hayashi, and Y. Kondo: Mater. Sci. Forum, 2010, vols. (638–642), pp. 2291–96.10.4028/www.scientific.net/MSF.638-642.2291 ↗
24. F.Z. Sierra, D. Narzary, C. Bolaina, J.C. Han, J. Kubiak, and J. Nebradti: Heat Transfer and Thermal Mechanical Stress Distributions in Gas Turbine Blades, Presented at ASME Turbo Expo 2009: Power for Land, Sea, and Air, Orlando, FL, June 8–12, 2009.10.1115/GT2009-59194 ↗
25. A. Altincekic and E. Balikci: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 2487-97.10.1007/s11661-013-1618-x ↗
26. E. Balikci, R.A. Mirshams, and A. Raman: Z. Metallkd., 1999, vol. 90 (2), pp. 132-40.
27. The Nickel Producers Environmental Research Association (NIPERA): Alloy IN-738 Technical Data. http://www.nipera.org/~/Media/Files/TechnicalLiterature/IN_738Alloy_PreliminaryData_497_.pdf. Accessed Aug 2014.
28. E. Balikci: Ph.D. Dissertation, Louisiana State University, Baton Rouge, LA, 1998.
29. E. Balikci, R.A. Mirshams, and A. Raman: J. Mater. Eng. Perform., 2000, vol. 9 (3), pp. 324-29.10.1361/105994900770345999 ↗
30. A. Sato, J. Moverare, M. Hasselqvist, and R.C. Reed: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 2302-15.10.1007/s11661-011-0995-2 ↗
31. J.J. Moverare, S. Johansson, and R.C. Reed: Acta Mater., 2009, vol. 57, pp. 2266-76.10.1016/j.actamat.2009.01.027 ↗
32. E. Balikci, R.A. Mirshams, and A. Raman: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1993–2003.10.1007/s11661-997-0156-9 ↗
33. J. Zrnik, P. Strunz, M. Maldini, A. Wiedenmann, and V. Davydov: J. Phys.-Condens. Mat., 2008, vol. 20 (10), pp. 104261-1–1-8.10.1088/0953-8984/20/10/104261 ↗
34. H. Biermann, B. von Grossmann, T. Schneider, H. Feng, and H. Mughrabi: Superalloys 1996 (Eighth International Symposium), The American Society for Metals, Warrendale, PA, 1996, pp. 201–210.10.7449/1996/Superalloys_1996_201_210 ↗
35. A. Lasalmonie and J.L. Strudel: Philos. Mag., 1975, vol. 32 (5), pp. 937-49.10.1080/14786437508221665 ↗
36. P.J. Henderson and M. Mclean: Acta Metall., 1983, vol. 31 (8), pp. 1203-19.10.1016/0001-6160(83)90182-7 ↗
37. J.A. Carey, P.M. Sargent, and D.R.H Jones: J. Mater. Sci. Lett., 1990, vol. 9(5), pp. 572–75.10.1007/BF00725881 ↗
38. N. Matan, D.C. Cox, C.M.F. Rae, and R.C. Reed: Acta Mater., 1999, vol. 47 (7), pp. 2031-45.10.1016/S1359-6454(99)00093-2 ↗
39. J.X. Yang, Q. Zheng, X.F.Sun, H.R. Guan, and Z.Q. Hu: Mater. Sci. Eng. A, 2007, vol. 457, pp. 148-55.10.1016/j.msea.2006.12.041 ↗
40. O. Paris, M. Fahrmann, E. Fahrmann, T.M. Pollock, and P. Fratzl: Acta Mater., 1997, vol. 45 (3), pp. 1085-97.10.1016/S1359-6454(96)00223-6 ↗
41. R.W. Hertzberg: Deformation and Fracture Mechanics of Engineering Materials, John Wiley & Sons, Inc., New York, NY, 1996.
42. R.C. Reed, D.C. Cox, and C.M.F. Rae: Mater. Sci. Eng. A, 2007, vol. 448, pp. 88-96.10.1016/j.msea.2006.11.101 ↗
43. A. Epishin, T. Link, P. D. Portella, and U. Bruckner: Acta Mater., 2000, vol. 48, pp. 4169–77.10.1016/S1359-6454(00)00197-X ↗