journal article·2011-09

Domain Reorientation as a Damping Mechanism in Ferroelastic-Reinforced Metal Matrix Composites

B. D. Poquette, T. A. Asare, J. P. Schultz, D. W. Brown, S. L. Kampe

Publisher page

Abstract

The damping behavior of a model ferroelastic-reinforced–metal matrix composite (FR-MMC) system was examined through the incorporation of barium titanate (BaTiO3) particles into a Cu-10 wt pct Sn (bearing bronze) matrix. The damping properties of the resulting FR-MMC were investigated vs frequency, temperature (above and below the Curie temperature of the ferroelastic reinforcement), and number of strain cycles. Dynamic mechanical analysis (DMA) indicates that the incorporation of the ferroelastic-capable reinforcement significantly augments the damping capability relative to the matrix alone, and also with respect to the damping that would result from the presence of passive composite reinforcements. Neutron diffraction data demonstrate a strong correlation of domain reorientation activity to imposed stress level and demonstrate a degree of reversibility important to the potential practical application of this mechanism of damping.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Structural Behavior of Reinforced Concrete · Ferroelectric and Piezoelectric Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. A. Wolfenden and J.M. Wolla: in Metal Matrix Composites: Mechanisms and Properties, R.K. Everett and R.J. Arsenault, eds., Academic Press, San Diego, CA, 1991, pp. 287–355.
2. W. Zhang, J.M. Kim, and N. Koratkar: Smart Mater. Struct., 2003, vol. 12, pp. 642–46.10.1088/0964-1726/12/4/315 ↗
3. K.B. Hathaway, A.E. Clark, and J.P. Teter: Metall. Trans. A, 1995, vol. 26A, pp. 2797–2801.10.1007/BF02669638 ↗
4. G.P. Carman, G. McKnight, P. Chaplya, and N. Nersessian: “Magnetostrictive Particulate Composites for Damping,” Air Force Research Laboratories Technical Report AFRL-SR-AR-TR-04, University of California, Los Angeles, CA, 2004.
5. Y. Suzuki, K. Uchino, H. Gouda, M. Sumita, R.E. Newnham, and A.R. Ramachandran: J. Ceram. Soc. Jpn., 1991, vol. 99, pp. 1135–37.10.2109/jcersj.99.1135 ↗
6. O.J. Aldraihem, A. Baz, and T.S. Al-Saud: Mech. Adv. Mater. Struct., 2007, vol. 14, pp. 413–26.10.1080/15376490701298876 ↗
7. A.C. Goff, A.O. Aning, and S.L. Kampe: TMS Lett., 2004, vol. 1, pp. 59–60.
8. A.C. Goff: Master’s Thesis, Virginia Polytechnic Institute and State University, Blacksburg, VA, 2003; accessible at http://scholar.lib.vt.edu/theses/available/etd-05212003-205819.
9. M.P. McNeal, S. Jang, and R.E. Newnham: J. Appl. Phys., 1998, vol. 83, pp. 3288–97.10.1063/1.367097 ↗
10. R. Amatulu, R.O. Claus, J.B. Mecham, and D.J. Inman: J. Intell. Mater. Syst. Struct., 2005, vol. 15, pp. 463–68.10.1177/1045389X05048850 ↗
11. S. Kim, T. Chung, and D. Kim: J. Eur. Ceram. Soc., 1993, vol. 12 (2), pp. 147–51.10.1016/0955-2219(93)90135-E ↗
12. S.-Y. Cheng, N.-J. Ho, and H.-Y. Lu: J. Am. Ceram. Soc., vol. 91 (11), pp. 3721–27.10.1111/j.1551-2916.2008.02743.x ↗
13. G. Arlt: J. Mater. Sci., 1990, vol. 25, pp. 2655–66.10.1007/BF00584864 ↗
14. J.A. Forrester, E.H. Kisi, and A.J. Studer: J. Eur. Ceram. Soc., 2005, vol. 25, pp. 447–54.10.1016/j.jeurceramsoc.2004.03.018 ↗
15. B.D. Poquette, J.P. Schultz, T.A. Asare, A.O. Aning, and S.L. Kampe: in Science and Technology of Powder Materials: Synthesis, Consolidation, and Properties, TMS, Warrendale, PA, LL. Shaw, F.D.S. Marquis, E.A. Olevsky, I.E. Anderson, M.G. McKimpson, J.P. Singh, and J.H. Adair, eds., 2005, pp. 119–26.
16. T.A. Asare, J.P. Schultz, B.D. Poquette, A.O. Aning, and S.L. Kampe: in Science and Technology of Powder Materials: Synthesis, Consolidation, and Properties, TMS, Warrendale, PA, L.L. Shaw, F.D.S. Marquis, E.A. Olevsky, I.E. Anderson, M.G. McKimpson, J.P. Singh, and J.H. Adair, eds., 2005, pp. 189–94.
17. T.A. Asare: PhD Dissertation, Virginia Polytechnic Institute & State University, Blacksburg, VA, 2007, http://scholar.lib.vt.edu/theses/available/etd-10062007-151616/.
18. B.D. Poquette: PhD Dissertation, Virginia Polytechnic Institute & State University, Blacksburg, VA, 2007, http://scholar.lib.vt.edu/theses/available/etd-10022007-124455.
19. J.P. Schultz, T.A. Asare, B.D. Poquette, and S.L. Kampe: U.S. Patent 7,586,233, issued Sept. 8, 2009.
20. S.L. Kampe, J.P. Schultz, A.O. Aning, A.C. Goff, and J.S. Franklin: U.S. Patent 7,126,257, Oct. 2006.
21. J. Calderon-Moreno and M. Popa: Mater. Sci. Eng. A, 2002, vol. A336, pp. 124–28.10.1016/S0921-5093(01)01976-1 ↗
22. F. Davi and R. Rizzoni: J. Mech. Phys. Sol., 2004, vol. 52, pp. 113–44.10.1016/S0022-5096(03)00076-0 ↗
23. W.S. Kreher: J. Mech. Phys. Sol., 2002, vol. 50, pp. 1029–50.10.1016/S0022-5096(01)00110-7 ↗
24. Y. Ma, E.H. Kisi, and S.J. Kennedy: J. Am. Ceram. Soc., 2001, vol. 84, pp. 399–405.10.1111/j.1151-2916.2001.tb00668.x ↗
25. Los Alamos Science, N.G. Cooper, ed., Los Alamos National Laboratories, Los Alamos, NM, 1990, No. 19.
26. J.E. Daniels, M.V. Manuel, C.W. Brink, and J.L. Jones: Scripta Metall., 2009, vol. 61, pp. 391–94.10.1016/j.scriptamat.2009.04.028 ↗
27. T.A. Asare, J.P. Schultz, B.D. Poquette, and S.L. Kampe: 2011, unpublished research.
28. T. Lee and I.A. Aksay: Cryst. Growth Des., 2001, vol. 1, pp. 401–19.10.1021/cg010012b ↗
29. S.W. Lu, B.I. Lee, Z.L. Wang, and W.D. Samuels: J. Cryst. Growth, 2000, vol. 219, pp. 269–76.10.1016/S0022-0248(00)00619-9 ↗
30. W.Y. Shih, W.H. Shih, and I.A. Aksay: Phys. Rev. B: Condens. Matter, 1994, vol. 50, pp. 15575–85.10.1103/PhysRevB.50.15575 ↗
31. X.H. Liu, W.Y. Shih, and W.H. Shih: J. Am. Ceram. Soc., 1997, vol. 80, pp. 2781–88.10.1111/j.1151-2916.1997.tb03194.x ↗