Grain Refining of 409L Ferritic Stainless Steel Using Fe-Ti-N Master Alloy
Source abstract
Abstract
A deliberately prepared Fe-Ti-N master alloy was employed as a grain refiner for the 409L ferritic stainless steel in an attempt to refine the as-cast solidification structure. It was found that the average equiaxed grain size of the sample deceased from 1503 to 303 μm and the proportion of equiaxed grain zone increased from 14 to 100 pct with increasing the Fe-Ti-N master alloy addition level to 2.5 wt pct. Hence, this method may have good prospects for industrial applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. K.H. Lo, C.H. Shek, and J.K.L. Lai: Mater. Sci. Eng. R, 2009, vol. 65, pp. 39–104.10.1016/j.mser.2009.03.001 ↗
2. J.A. Spittle: Int. Mater. Rev., 2006, vol. 51, pp. 247–69.10.1179/174328006X102493 ↗
3. J.K. Brimacombe: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1899–1912.10.1007/s11661-999-0001-4 ↗
4. H.J. Shin, J.K. An, S.H. Park, and D.N. Lee: Acta Mater., 2003, vol. 51, pp. 4693–4706.10.1016/S1359-6454(03)00187-3 ↗
5. J. Hamada, Y. Matsumoto, F. Fudanoki, and S. Maeda: ISIJ, 2003, vol. 43, pp. 1989–98.10.2355/isijinternational.43.1989 ↗
6. K. Nakajima, H. Hasegawa, S. Khumkoa, and S. Mizoguchi: Metall. Mater. Trans. B, 2003, vol. 34B, pp. 539–47.10.1007/s11663-003-0022-0 ↗
7. S.H. Nedjad and A. Farzaneh: Acta Mater., 2007, vol. 57, pp. 937–40.
8. J.Q. Guo, S. Tsukamoto, T. Kimura, and H. Nakae: Acta Mater., 1999, vol. 47, pp. 3767–78.10.1016/S1359-6454(99)00236-0 ↗
9. X.G. Ma, X.F. Liu, and H.M. Ding: J. Alloys Compd., 2009, vol. 471, pp. 56–59.10.1016/j.jallcom.2008.03.044 ↗
10. Y. Birol: J. Alloys Compd., 2006, vol. 420, pp. 71–76.10.1016/j.jallcom.2005.10.017 ↗
11. S.A. Kori, B.S. Murty, and M. Chakraborty: Mater. Sci. Eng. A, 2000, vol. 280, pp. 58–61.10.1016/S0921-5093(99)00656-5 ↗
12. Ø. Grong, L. Kolbernsen, C.V.D. Eijk, and G. Tranell: ISIJ, 2006, vol. 46, pp. 824–31.10.2355/isijinternational.46.824 ↗
13. C.V.D. Eijk, Ø. Grong, F. Haakonsen, L. Kolbernsen, and G. Tranell: ISIJ, 2009, vol. 49, pp. 1046–50.10.2355/isijinternational.49.1046 ↗
14. E.F. Nordstrand, Ø. Grong, C.V.D. Eijk, and S. Gaal: ISIJ, 2009, vol. 49, pp. 1051–58.10.2355/isijinternational.49.1051 ↗
15. C. Wang, H.Y. Gao, Y.B. Dai, X.M. Ruan, J.G. Shen, H. Li, J. Wang, and B.D. Sun: J. Alloy Compd., 2010, vol. 490, pp. L9–L11.10.1016/j.jallcom.2009.09.178 ↗
16. B.L. Bramfitt: Metall. Trans., 1970, vol. 1, pp. 1987–95.10.1007/BF02642799 ↗
17. S.H. Zhang, N. Hattori, M. Enomoto, and T. Tarui: ISIJ, 1996, vol. 36, pp. 1301–09.10.2355/isijinternational.36.1301 ↗