journal article·2012-05

Cyclic-Loading Induced Lattice-Strain Asymmetry in Loading and Transverse Directions

E-Wen Huang, Rozaliya I. Barabash, Bjørn Clausen, Peter K. Liaw

Publisher page

Abstract

Cyclic-loading effects on a nickel-based superalloy are investigated with in-situ neutron-diffraction measurements. The temperature evolution subjected to cyclic loading is estimated based on the lattice-strain evolution. The calculated thermoelastic responses are compared with the measured bulk temperature evolution. Two transitions in the temperature-evolution are observed. The first transition, observed with the neutron-measurement results, is associated with the cyclic hardening/softening-structural transformation. The second transition is observed at a larger number of fatigue cycles. It has a distinct origin and is related to the start of irreversible structural transformations during fatigue. A lattice-strain asymmetry behavior is observed. The lattice-strain asymmetry is quantified as a grain-orientation-dependent transverse/loading parameter. This strain-asymmetry evolution reveals the irreversible plastic deformation subjected to fatigue. The irreversible fatigue phenomena might relate to the formation of the microcracks. At elevated temperatures, the cyclic hardening/softening transition starts at lower fatigue cycles as compared to room temperature. A comparison between the room-temperature and the elevated-temperature fatigue experiments is performed. The asymmetry-parameter evolutions show the same irreversible trends at both the room and elevated temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. D. Kuhlmann-Wilsdorf: Philos. Mag. A, 1999, vol. 79 (4), pp. 955–1008.10.1080/01418619908210342 ↗
2. A.K. Vasudevan and K. Sadananda: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1221–34.10.1007/BF02670617 ↗
3. Y.F. Li and C. Laird: Mater. Sci. Eng. A, 1994, vol. 186 (1–2), pp. 87–103.
4. S. Suresh, Y. Sugimura, and E.K. Tschegg: Scripta Metall. Mater., 1992, vol. 27 (9), pp. 1189–94.10.1016/0956-716X(92)90597-8 ↗
5. K. Solanki, S.R. Daniewicz, and J.C. Newman: Eng. Fract. Mech., 2004, vol. 71 (2), pp. 149–71.10.1016/S0013-7944(03)00099-7 ↗
6. P. Neumann: Scripta Metall. Mater., 1992, vol. 26 (10), pp. 1535–40.10.1016/0956-716X(92)90252-A ↗
7. H. Mughrabi: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 1257–79.10.1007/s11661-009-9839-8 ↗
8. A. Guinier, R. Julien: The Solid State from Superconductors to Superalloys. Oxford University Press, Oxford, United Kingdom, 1989.
9. N. Thompson: in Fracture, Averbach, ed., Wiley, New York, 1959, p. 354.
10. M. Balbi, M. Avalos, A. El Bartali, and I. Alvarez-Armas: Int. J. Fatigue, 2009, vol. 31 (11–12), pp. 2006–13.10.1016/j.ijfatigue.2008.12.007 ↗
11. M. Kabatova, E. Dudrova, and A.S. Wronski: Fatigue Fract. Eng. Mater. Struct., 2009, vol. 32 (3), pp. 214–22.10.1111/j.1460-2695.2009.01328.x ↗
12. A.L. Pilchak, R.E.A. Williams, and J.C. Williams: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 106–24.10.1007/s11661-009-0064-2 ↗
13. M.C. Marinelli, A. El Bartali, J.W. Signorelli, P. Evrard, V. Aubin, I. Alvarez-Armas, and S. Degallaix-Moreuil: Mater. Sci. Eng. A, 2009, vol. 509 (1–2), pp. 81–88.10.1016/j.msea.2009.01.012 ↗
14. U. Krupp, O. Duber, H.J. Christ, B. Kunkler, P. Koster, and C.P. Fritzen: Mater. Sci. Eng. A, 2007, vol. 462 (1–2), pp. 174–77.10.1016/j.msea.2006.03.159 ↗
15. E.W. Huang, R.I. Barabash, B. Clausen, Y.L. Liu, J.J. Kai, G.E. Ice, K.P. Woods, and P.K. Liaw: Int. J. Plast., 2010, vol. 26 (8), pp. 1124–37.10.1016/j.ijplas.2010.01.003 ↗
16. J.F. Nye: Physical Properties of Crystals: Their Representation by Tensors and Matrices, Oxford University Press, Oxford, United Kingdom, 1985.
17. R.N. Thurston: IEEE Trans. Ultrason. Ferroelectr. Freq. Control, 1994, vol. 41 (4), pp. 425–34.10.1109/58.294101 ↗
18. E.W. Huang, R. Barabash, N. Jia, Y.D. Wang, G. Ice, B. Clausen, J. Horton, and P.K. Liaw: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 3079–88.10.1007/s11661-008-9704-1 ↗
19. A. Arya, G.K. Dey, V.K. Vasudevan, and S. Banerjee: Acta Mater., 2002, vol. 50 (13), pp. 3301–15.10.1016/S1359-6454(02)00093-9 ↗
20. E.W. Huang, Y. Liu, Y. Ren, L. Porcar, J.-J. Kai, P.K. Liaw, G.S. Smith, and W.-R. Chen: Philos. Mag. Lett., 2011, vol. 91 (7), p. 483.10.1080/09500839.2011.587463 ↗
21. E.W. Huang, P.K. Liaw, L. Porcar, Y. Liu, Y.L. Liu, J.J. Kai, and W.R. Chen: Appl. Phys. Lett., 2008, vol. 93 (16).10.1063/1.3002288 ↗
22. R.I. Barabash, E.W. Huang, J.J. Wall, J.H. Wilkerson, Y. Ren, W.J. Liu, S.C. Vogel, G.E. Ice, L.M. Pike, and P.K. Liaw: Mater. Sci. Eng. A, 2010, vol. 528 (1), pp. 3–10.10.1016/j.msea.2010.07.035 ↗
23. Y.D. Wang, H.B. Tian, A.D. Stoica, X.L. Wang, P.K. Liaw, and J.W. Richardson: Nat. Mater., 2003, vol. 2 (2), pp. 101–06.10.1038/nmat812 ↗
24. M.R. Daymond and P.J. Withers: Scripta Mater., 1996, vol. 35 (6), pp. 717–20.10.1016/1359-6462(96)00217-5 ↗
25. M.R. Daymond, M.A.M. Bourke, R.B. VonDreele, B. Clausen, and T. Lorentzen: J. Appl. Phys., 1997, vol. 82 (4), pp. 1554–62.10.1063/1.365956 ↗
26. A. Kumar, T. Jayakumar, B. Raj, and K.K. Ray: Acta Mater., 2003, vol. 51 (8), pp. 2417–26.10.1016/S1359-6454(03)00054-5 ↗
27. T. Lorentzen, M.R. Daymond, B. Clausen, and C.N. Tome: Acta Mater., 2002, vol. 50 (6), pp. 1627–38.10.1016/S1359-6454(02)00029-0 ↗
28. E.W. Huang, R.I. Barabash, G.E. Ice, W.J. Liu, Y.L. Liu, J.J. Kai, and P.K. Liaw: JOM, 2009, vol. 61 (12), pp. 53–58.10.1007/s11837-009-0181-9 ↗
29. M.D. Sangid, H.J. Maier, and H. Sehitoglu: Acta Mater., 2011, vol. 59 (1), pp. 328–41.10.1016/j.actamat.2010.09.036 ↗
30. T. Ungar, I. Groma, and M. Wilkens: J. Appl. Crystallogr., 1989, vol. 22 (1), pp. 26–34.10.1107/S0021889888009720 ↗
31. R. Barabash, G.E. Ice, B.C. Larson, G.M. Pharr, K.S. Chung, and W. Yang: Appl. Phys. Lett., 2001, vol. 79 (6), pp. 749–51.10.1063/1.1389321 ↗
32. D. Balzar and H. Ledbetter: J. Appl. Crystallogr., 1993, vol. 26, pp. 97–103.10.1107/S0021889892008987 ↗
33. R.I. Barabash, G.E. Ice, and F.J. Walker: J. Appl. Phys., 2003, vol. 93 (3), pp. 1457–64.10.1063/1.1534378 ↗
34. R.I. Barabash, W. Donner, and H. Dosch: Appl. Phys. Lett., 2001, vol. 78 (4), pp. 443–45.10.1063/1.1342215 ↗
35. R.I. Barabash, S.A. Demin, M.A. Krivoglaz, and K.V. Chuistov: J. Appl. Crystallogr., 1990, vol. 23, pp. 458–61.10.1107/S0021889890005039 ↗
36. A.K. Wong, S.A. Dunn, and J.G. Sparrow: Nature, 1988, vol. 332 (6165), pp. 613–15.10.1038/332613a0 ↗
37. S. Quinn, J.M. Dulieu-Barton, and J.M. Langlands: Strain, 2004, vol. 40 (3), pp. 127–33.10.1111/j.1475-1305.2004.00140.x ↗
38. M.T. Hutchings, P.J. Withers, T.M. Holden, and T. Lorentzen: Introduction to the Characterization of Residual Stress by Neutron Diffraction, Taylor & Francis Group, Boca Raton, FL, 2005.10.1201/9780203402818 ↗
39. S.L. Wong and P.R. Dawson: Acta Mater., 2011, DOI:10.1016/j.actamat.2011.07.042.10.1016/j.actamat.2011.07.042 ↗
40. P. Stanley and W.K. Chan: J. Strain Anal. Eng. Design, 1985, vol. 20 (3), pp. 129–37.10.1243/03093247V203129 ↗
41. E.W. Huang, R.I. Barabash, Y.D. Wang, B. Clausen, L. Li, P.K. Liaw, G.E. Ice, Y. Ren, H. Choo, L.M. Pike, and D.L. Klarstrom: Int. J. Plast., 2008, vol. 24 (8), pp. 1440–56.10.1016/j.ijplas.2007.10.001 ↗
42. H.S. Turkmen, P.R. Dawson, and M.P. Miller: Int. J. Plast., 2002, vol. 18 (8), pp. 941–69.10.1016/S0749-6419(01)00019-5 ↗
43. U.F. Kocks, C.N. Tomé, and H.-R. Wenk: Texture and Anisotropy: Preferred Orientations in Polycrystals and Their Effect on Materials Properties, Cambridge University Press, Cambridge, United Kingdom, 1998).
44. T. Hoc and S. Forest: Int. J. Plast., 2001, vol. 17 (1), pp. 65–85.10.1016/S0749-6419(00)00019-X ↗
45. P. Evrard, I. Alvarez-Armas, V. Aubin, and S. Degallaix: Mech. Mater., 2010, vol. 42 (4), pp. 395–404.10.1016/j.mechmat.2010.01.007 ↗