journal article·2006-09

Effect of artificial aging time on the mechanical properties of weldment on API 5L X-52 line pipe steel

B. Vargas-Arista, J. M. Hallen, A. Albiter, C. Angeles-Chavez

Publisher page

Abstract

The effect of artificial aging time on the microstructure and mechanical properties in the weld and base metals of an API 5L-X52 line pipe steel was studied. Artificial aging was performed for 1000 hours at 250 °C and was monitored every 100 hours. Vickers hardness and tensile tests were used to examine the aging effect on the mechanical properties. Scanning electron microscopy and transmission electron microscopy (TEM) studies were carried out to analyze the microstructure evolution. The Vickers hardness results showed that the weld and base metals displayed a hardening tendency up to a maximum value at 500 hours of aging. The yield strength increased with aging time while the elongation-to-fracture decreased. The maximum yield strength was found at 500 hours, which was attributed to the peak-aged condition. After 500 hours, both the Vickers hardness and yield strength were reduced while the elongation was increased due to the overaging condition. The TEM observations and fracture analysis of specimens showed that the improvement of strength was associated with the nanoparticles’ precipitation, while the degradation of the microstructure and mechanical properties was related to the coarsening process of iron carbide (cementite) and niobium carbide for the weld and base metals, respectively. The largest amount of precipitation in both alloys occurred at 500 hours.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. T. Gladman:The Physical Metallurgy of Microalloyed Steels, 1st ed., The Institute of Materials, London, 1997, pp. 185–211.
2. L.E. Collins, M. Kostic, T. Lawrence, R. Mackenzie, and N. Townley:Proc. Int. Conf. on Pipeline, ASME, New York, 2000, vol. 1, pp. 185–91.
3. U. Sharma and D.G. Ivey:Proc. Int. Conf. on Pipeline, ASME, New York, 2000, vol. 1, pp. 193–201.
4. L.E. Collins, M.J. Godden, and J.D. Boyd:Can. Inst. Mining Metall., 1983, vol. 22 (2), pp. 169–79.10.1179/cmq.1983.22.2.169 ↗
5. J.F. Chávez-Alcalá, A. Rodríguez-Reyes, E.G. Navarrete-Ramos, H.J. Dorantes-Rosales, M.L. Saucedo-Muñoz, and V.M. Lopez-Hirata:Iron Steel Inst. Jpn. Int., 2001, vol. 41 (12), pp. 1532–34.10.2355/isijinternational.41.1532 ↗
6. W.C. Leslie:The Physical Metallurgy of Steels, 1st ed., McGraw-Hill, Tokyo, Japan, 1982, pp. 79–94.
7. Steel. A Handbook for Materials Research and Engineering, 1st ed., Verein Deutscher Eisenhüttenleute (VDEh), Fundamental, Germany, 1992, vol. 1, pp. 97–108.
8. J.A. Barreiro:Tratamientos Térmicos de los Aceros, 8th ed., Madrid, España, 1981, pp. 311–15.
9. G. Krauss:Heat Treatment and Processing Principles, ASM, Materials Park, OH, 1990, pp. 125–30.
10. S.O. Kotrechko, A.Y. Krasowsky, Y.Y. Meshkov, and V.M. Torop:Int. J. Pressure Vessels Piping, 2004, vol. 81 (4), pp. 337–44.10.1016/j.ijpvp.2004.02.015 ↗
11. K. Homma, C. Miki, and H. Yang:Eng. Fract. Mech., 1998, vol. 59 (1), pp. 17–28.10.1016/S0013-7944(97)00100-8 ↗
12. T. Watanabe, M. Yamazaki, H. Hongo, M. Tabuchi, and T. Tanabe:Int. J. Pressure Vessels Piping, 2004, vol. 81 (3), pp. 279–84.10.1016/j.ijpvp.2003.12.017 ↗
13. I. Hamada and K. Yamauchi:Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1743–54.10.1007/s11661-002-0183-5 ↗
14. P. Morales Gil, M. Romero Romo, C. Ángeles Chávez, and M. Palomar Pardavé:Chihuahua, Chic., 2003, vol. 1, pp. 1–12.
15. Welding of Pipelines and Related Facilities, 20th ed., API Standard 1104, American Petroleum Institute, Washington, DC, 2005, pp. 3–15.
16. Specification for Line Pipe, 43rd ed., API Specification 5L, American Petroleum Institute, Washington, DC, 2004, pp. 8–17.
17. Tubería de Acero Para Recolección y Transporte de Hidrocarburos Amargos, 1st ed., NRF-001-PEMEX-2000, Petroleos Mexicanos, México, D.F. 2000, pp. 12–19.
18. Standard Test Method for Vickers Hardness of Metallic Materials, ASTM Standard E-92, ASTM, West Conshohocken, PA, 1982 (reapproved 2003), pp. 309–14.
19. Standard Test Methods for Tension Testing of Metallic Materials, ASTM Standard E-8M, ASTM, West Conshohocken, PA, 2004, pp. 153–60.
20. M. Ikeda, S.Y. Komatsu, I. Sowa, and M. Niinomi:Metall. Mater. Trans. A, 2002, vol. 33A, pp. 487–93.10.1007/s11661-002-0110-9 ↗
21. H.R. Shakeri and Z. Wang:Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1699–713.10.1007/s11661-002-0179-1 ↗
22. Standard Test Methods for Determining Average Grain Size, ASTM Standard E-112, ASTM, West Conshohocken, PA, 1996 (reapproved 2004), pp. 10–12.
23. Welding Handbook: Fundamentals of Welding, 7th ed., AWS, Miami, FL, 1976, vol. 1, pp. 224–30.
24. G.M. Evans and N. Bailey:Metallurgy of Basic Weld Metal, Abington Publishing, Cambridge, England, 1997, pp. 148–58.10.1533/9781845698850.1.148 ↗
25. J.K. Allafi, A. Dlouhy, and G. Eggeler:Acta Mater., 2002, vol. 50, pp. 4255–74.10.1016/S1359-6454(02)00257-4 ↗
26. S.H. Wang, J.Y. Uan, T.S. Lui, and L.H. Chen:Metall. Mater. Trans. A, 2002, vol. 33A, pp. 707–11.10.1007/s11661-002-0135-0 ↗