Cold Compaction of Copper Powders Under Mechanical Vibration and Uniaxial Compression
Source abstract
Abstract
Physical experiments were carried out to study the cold compaction of copper powders under uniaxial compression using our self-designed equipment. Two kinds of copper powders with different particle sizes and distributions were considered. One-dimensional vibrations were utilized before compaction to systematically study the effect of parameters such as vibration frequency ω, amplitude A, and vibration intensity Г on the initial packing density. The macro-property and corresponding microstructures of compacts obtained from initial packings with and without vibrations were compared and analyzed. The results show that higher packing density can be obtained in the compaction of coarse powders with broad size distribution when other experimental conditions are fixed. For each powder, the evolution of packing density vs pressure takes on exponential correlation with high R 2 value. Much denser and more uniform compacts can be realized with the aid of vibration which can improve the particle rearrangement and result in the filling of macro pores formed in initial packing, and the characterization on the microstructure identifies that the particles inside the compact become polyhedrons with regular shape and uniformly distributed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · Injection Molding Process and Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. K.A. Kuhn and C.L. Downey: Inter. J. Powder Met., 1971, vol. 7, pp. 15-25.
2. R.J. Green: Int. J. Mech. Sci., 1972, vol. 14, pp. 215-224.10.1016/0020-7403(72)90063-X ↗
3. S. Shima and M. Oyane: Int. J. Mech. Sci., 1976, vol. 18, pp. 285-291.10.1016/0020-7403(76)90030-8 ↗
4. H.S. Kim and D.N. Lee: Powder Metall., 1992, vol. 35, pp. 275-279.10.1179/pom.1992.35.1.57 ↗
5. D.T. Gethin, V.D. Tran, R.W. Lewis, and A.K. Ariffin: Inter. J. Powder Met., 1994, vol.30, pp. 385-398.
6. Y.S. Kwon, H.T. Lee, and K.T. Kim: J. Eng. Tech., 1997, vol. 119, pp. 366-373.
7. W. Bier, M.P. Dariel, N. Frage, S. Hartmann, and O. Michailov: Inter. J. Mech. Sci., 2007, vol. 49, pp. 766-777.10.1016/j.ijmecsci.2006.09.026 ↗
8. E. Hryha, E. Dudrova and S. Bengtsson: Powder Met., 2008, vol. 51, pp. 340-342.10.1179/174329008X286596 ↗
9. F.F. Lange: J. Am. Ceram. Soc., 1989, vol. 72, pp. 3-15.10.1111/j.1151-2916.1989.tb05945.x ↗
10. R. Riedel and I.W. Chen (eds.): Ceramics Science and Technology, Synthesis and Processing, 1st ed., Wiley-VCH, GmbH & Co. KGaA, Weinheim, 2012, vol. 3, pp. 1-34.
11. R.M. German: Powder Metallurgy Science, Metal Powder Industries Federation, 2nd ed., Princeton, NY, 1994, pp. 192–220.
12. C.Y. Wu and A.C.F. Cocks: Powder Metall., 2004, vol. 47, pp. 127-136.10.1179/003258904225015617 ↗
13. O. Coube, A.C.F. Cocks, and C.Y. Wu: Powder Metall., 2005, vol. 48, pp. 68-76.10.1179/003258905X37585 ↗
14. X. Xie and V.M. Puri: Particulate Sci. Technol., 2006, vol. 24, pp. 411-426.10.1080/02726350600934663 ↗
15. S.F. Burch, A.C.F. Cocks, J.M. Prado, and J.H. Tweed: in Modeling of Powder Die Compaction, P.R. Brewin, O. Coube, P. Doremus, and J.H. Tweed, eds., Springer, London, 2008, pp. 131–50.
16. C. Zhao, M.K. Jain, M. Bruhis, and R. Lawcock: Powder Technol., 2011, vol. 208, pp. 225-230.10.1016/j.powtec.2010.12.024 ↗
17. X.Z. An, R.Y. Yang, K.J. Dong, R.P. Zou, and A.B. Yu: Phys. Rev. Lett., 2005, vol.95, pp. 205502-1-4.10.1103/PhysRevLett.95.205502 ↗
18. X.Z. An: Chin. Phys. Lett., 2007, vol. 24, pp. 2327-2330.10.1088/0256-307X/24/8/047 ↗
19. X.Z. An, R.Y. Yang, R.P. Zou, and A.B. Yu: Powder Technol., 2008, vol. 188, pp. 102-109.10.1016/j.powtec.2008.04.001 ↗
20. X.Z. An, C.X. Li, R.Y. Yang, R.P. Zou, and A.B. Yu: Powder Technol., 2009, vol. 196, pp. 50-55.10.1016/j.powtec.2009.06.016 ↗
21. J.D. Bernal: Nature, 1959, vol. 183, pp. 141-147.10.1038/183141a0 ↗
22. X.Z. An, B.M. Feng, C. Li, F. Huang, Z.T. Xing, C.X. Li, and L. Dong: China Invention Patent, 201110247913.X, 2011. (In Chinese)
23. J.B. Knight, C.G. Fandrich, C.N. Lau, H.M. Jaeger, and S.R. Nagel: Phys. Rev. E, 1995, vol. 51, pp. 3957-3963.10.1103/PhysRevE.51.3957 ↗
24. P. Philippe and D. Bideau: Phys. Rev. E, 2011, vol. 63, pp. 051304-1-9.
25. P. Philippe and D. Bideau: Europhys. Lett., 2002, vol. 60, pp. 677-683.10.1209/epl/i2002-00362-7 ↗
26. R.Y. Yang, R.P. Zou, and A.B. Yu: Phys. Rev. E, 2000, vol. 62, pp. 3900-3908.10.1103/PhysRevE.62.3900 ↗
27. G.D. Scott and D.M. Kilgour: J. Phys. D, 1969, vol. 2, pp. 863–66.10.1088/0022-3727/2/6/311 ↗
28. J.L. Finney: Proc. R. Soc. Lond. A, 1970, vol. 319, pp. 479-493.10.1098/rspa.1970.0189 ↗
29. R.M. German: Particle Packing Characteristics, Metal Powder Industries Federation, Princeton, New Jersey, 1989, pp. 183-192.
30. X.Z. An, Y.L. Zhang, Y.X. Zhang, and S. Yang: Unpublished research.
31. L. Parilak and E. Dudrova: Proc. PM World Cong., Paris, France, 1994, EPMA, vol. 1, pp. 737–40.