journal article·2015-11

Structure, Microsegregation, and Precipitates of an Alloy 690 ESR Ingot in Industrial Scale

Min Wang, Xiangdong Zha, Ming Gao, Yingche Ma, Kui Liu, Yiyi Li

Publisher page

Abstract

The structure, interdendritic, and intergranular segregation, and precipitates of an Alloy 690 electro-slag remelting (ESR) ingot in commercial scale (3t) were investigated by the optical microscopy, electroprobe microanalysis, scanning electron microscopy, and transmission electron microscopy (TEM) techniques. The results indicate that the central longitudinal section of the ESR ingot comprised the ramp-up, steady-state, and hot-top regions, which could be easily distinguished from each other through the macrostructures of them. In the interdendritic area, Cr and Ti were enriched, while Ni and Fe were depleted, and the nominal segregation indexes (ζ i = C 0 i /C interdendritic i ) of Ti, Cr, and Ni were 0.40, 0.91, and 1.04, respectively, in the hot-top region where suffered the severest segregation. Nitrides, principally precipitated between dendrites, were identified as TiN by TEM and EDS. The morphology, size distribution, and volume fraction of them were determined as well. In terms of the intergranular area, Cr and C coexisted, while Ni and Fe were depleted. And the dendrite-like carbides continuously distributed on the interface between grains, which were identified as M23C6 by the selected area diffraction pattern.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgical Processes and Thermodynamics · Aluminum Alloy Microstructure Properties · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. J.J. Kai, G.P. Yu, C.H. Tsai, M.N. Liu, and S.C. Yao: Metall. Trans. A, 1989, vol. 20, pp. 2057–67.10.1007/BF02650292 ↗
2. S.Y. Jiao, M.C. Zhang, L. Zheng, and J.X. Dong: Metall, Mater. Trans. A, 2010, vol. 41A, pp. 26–42.10.1007/s11661-009-0082-0 ↗
3. K. Stiller, J.O. Nilsson, and K. Norring: Metall. Mater. Trans. A, 1996, vol. 27, pp. 327–341.10.1007/BF02648410 ↗
4. G.E. Fuchs and S.Z. Hayden: Scripta Mater., 1991, vol. 25, pp. 1483–88.10.1016/0956-716X(91)90437-6 ↗
5. J.K. Hong, I.S. Kim, C.Y. Park and E.S. Kim: Wear, 2005, vol. 259, pp. 349–55.10.1016/j.wear.2004.12.007 ↗
6. T.M. Angeliu and G.S. Was: Metall. Trans. A, 1990, vol. 21, pp. 2097–07.10.1007/BF02647868 ↗
7. M. Thuvander and K. Stiller: Mater. Sci. Eng. A, 2000, vol. 281, pp.96–103.10.1016/S0921-5093(99)00741-8 ↗
8. Y.S. Lim, J.S. Kim, H.P. Kim and H.D. Cho: J. Nucl. Mater, 2004, vol. 335, pp. 108–14.10.1016/j.jnucmat.2004.07.038 ↗
9. H.P. Kim, S.S. Hwang, Y.S. Lim, I.H. Kuk and J.S. Kim: Met. Mater. Int., 2001, vol. 7, pp. 55–59.10.1007/BF03026939 ↗
10. R.S. Dutta, A. Lobo, R. Purandare, S.K. Kulkarni and G.K. Dey: Metall, Mater. Trans. A, 2002, vol. 33, pp. 1437–47.10.1007/s11661-002-0067-8 ↗
11. F.J. Meng, J.Q. Wang, E.H. Han and W. Ke: Corros. Sci., 2010, vol. 52, pp. 927–32.10.1016/j.corsci.2009.11.015 ↗
12. R.S. Dutta, R. Tewari and P.K. De: Corros. Sci., 2007, vol. 49, pp. 303–18.10.1016/j.corsci.2006.05.043 ↗
13. G.C.Allen, J.M. Dyke, S.J. Harris and A. Morris: Appl. Surf. Sci., 1988, vol. 31, pp. 220–38.10.1016/0169-4332(88)90063-3 ↗
14. J.J. Kai, C.H. Tsai and G.P. Yu: Nucl. Eng. Des., 1993, vol. 144, pp. 449–57.10.1016/0029-5493(93)90040-G ↗
15. J.L. Nelson and S. Floreen: Proceedings of the Second International Symposium on Environmental Degradation of Materials in Nuclear Power Systems—Water Reactors, pp. 4–11, ANS, La Grange Park, 1985.
16. J.M. Sarver, J.R. Crum and W.L. Mankins: Corrosion, 1988, vol. 44, pp. 288–89.10.5006/1.3583939 ↗
17. M. Thieme: Corros. Sci., 1993, vol. 34, pp. 1557–60.10.1016/0010-938X(93)90249-G ↗
18. G.P. Yu and H.C. Yao: Corrosion, 1990, vol. 46, pp. 391–402.10.5006/1.3585123 ↗
19. D.M. Symons: Metall, Mater. Trans. A, 1998, vol. 29, pp. 1265–77.10.1007/s11661-998-0253-4 ↗
20. T.H. Chen, C.K. Tsai, and T.H. Fang: Adv. Mater. Sci. Eng., 2013, p. 382503.
21. M.K. Lim, S.D. Oh and Y.Z. Lee: Nucl. Eng. Des., 2003, vol. 226, pp. 97–105.10.1016/S0029-5493(03)00187-0 ↗
22. W.S. Lee, C.Y. Liu and T.N. Sun: J. Mater. Process. Technol., 2004, vol. 153, pp. 219–25.10.1016/j.jmatprotec.2004.04.275 ↗
23. D.G. Kim and Y.Z. Lee: Wear, 2001, vol. 250, pp. 673–80.10.1016/S0043-1648(01)00676-7 ↗
24. H. Feng, Z.G. Song, W.J. Zheng, B. Chen and X.M. Ji: J. Iron Steel Res. Int., 2009, vol. 21, pp. 46–50.
25. S.L. Guo, D.F. Li, H.J. Pen, Q.M. Guo and J. Hu: J. Nucl. Mater, 2011, vol. 410, pp. 52–58.10.1016/j.jnucmat.2010.12.309 ↗
26. W.R. Sun, S.R. Guo, D.Z. Lu and Z.O. Hu: Mater. Lett., 1997, vol. 31, pp. 195–200.10.1016/S0167-577X(96)00266-2 ↗
27. T.J. Hughel and G.F. Bolling: Solidification, 1st ed., ASM, Metals Park, 1971, p. 311.
28. R. Jiang, B. Chen, X.C. Hao, Y.C. Ma, S. Li and K. Liu: J. Mater. Sci. Technol., 2012, vol. 28, pp. 446–52.10.1016/S1005-0302(12)60081-4 ↗
29. J.J. Blecher, T.A. Palmer and T. Debroy: Metall, Mater. Trans. A, 2014, vol. 45A, pp. 2142–51.10.1007/s11661-013-2149-1 ↗
30. Busch JD, de Barbadillo JJ, Krane MJM (2013) Metall. Mater. Trans. A., 44A:5295–03.10.1007/s11661-013-1659-1 ↗
31. Dudko, D.A. and I.N. Rublevskii: Avtomat. Svarka, 1960, vol. 13, pp. 12.
32. J. Campbell: J. Metals, 1970, vol. 22, pp. 23.
33. J.J. Burke, M.C. Flemings and A.E. Gorum: Solidification Technology, 1st ed., p. 285, Brook Hill publishing Company, Chestnut Hill, 1972.
34. Tanigawa, H., H. Sakasegawa, and T. Hirose: Fusion Eng. Des., 2013, vol. 88, pp. 2611–16.10.1016/j.fusengdes.2013.05.090 ↗
35. Zehua, W.: J. Mater. Process. Technol., 2007, vol. 182, pp. 588–92.10.1016/j.jmatprotec.2006.10.001 ↗
36. Prasad, V.V.S.: ISIJ Int., 1996, vol.36, pp. 1459–64.10.2355/isijinternational.36.1459 ↗
37. Hernandez M. B. and A. Mitchell: Ironmaking Steelmaking, 1999, vol. 26, pp. 423–38.10.1179/030192399677275 ↗
38. Kharicha, A., A. Ludwig, and M. Wu: Mater. Sci. Eng., A, 2005, vol. 413, pp. 129–34.10.1016/j.msea.2005.08.212 ↗
39. Nastac, L., et al.: JOM, 1998, vol. 50, pp. 30–35.10.1007/s11837-998-0376-5 ↗
40. W. Holzgruber and E. Plockinger: Stahlu Eisen, 1968, vol. 88, pp. 638.
41. N. D’Souza, M. Lekstrom and H.B. Dong: Mater. Sci. Eng. A, 2008, vol. 490, pp. 258–65.10.1016/j.msea.2008.01.025 ↗
42. Mitchell, A.: Mater. Sci. Eng. A, 2005, vol. 413, pp. 10–18.10.1016/j.msea.2005.08.157 ↗
43. Antonsson T, Fredriksson H (2005) Metall Mater. Trans. B, 36:85–96.10.1007/s11663-005-0009-0 ↗
44. Michelic, S.K.: Mater. Charact., 2015, vol. 100, pp. 61–67.10.1016/j.matchar.2014.12.014 ↗
45. Wada, H. and R.D. Pehlke: Metall. Trans. B, 1985, vol. 16, pp. 815–22.10.1007/BF02667518 ↗
46. Taylor, K.A.: Scripta Mater., 1995, vol. 32, pp. 7–12.10.1016/S0956-716X(99)80002-8 ↗