Effect of Y2O3 and TiC Reinforcement Particles on Intermetallic Formation and Hardness of Al6061 Composites via Mechanical Alloying and Sintering
Source abstract
Abstract
Al6061-based composites reinforced with 2 wt pctY2O3 and 2 wt pctTiC particles produced by mechanical alloying were investigated. The reinforced particles play important roles in the microstructural development and in determining the properties of the alloys. High-energy ball milling can facilitate a solid-state reaction between reinforced particles and the Al matrix, and the reaction kinetics of atomic diffusion can be accelerated enormously by subsequent sintering processing. As a result, complex intermetallic compounds and oxide particles can be formed in the alloy. In this study, the effect of reinforcement on phase formation and mechanical properties of Al6061-based composites has been examined. The results suggest that nano-Y2O3 particles can act as nucleation sites to facilitate formation of Al-Si-Y-O-based oxide particles. The addition of TiC particles can effectively refine the grain structure and encourage formation of iron-rich intermetallic compounds. Nanoindentation was used to understand the local variations in mechanical properties of the Al6061-based composites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Y.Q. Liu, H.T. Cong, W. Wang, C.H. Sun, H.M Cheng: Mater. Sci. Eng. A, 2009, vol. 505, pp. 151–156.10.1016/j.msea.2008.12.045 ↗
2. Z.Y. Ma, Y.L. Li, Y. Liang, F. Zheng, J. Bi, S.C. Tjong: Mater. Sci. Eng. A, 1996, vol. 219, pp. 229–231.10.1016/S0921-5093(96)10444-5 ↗
3. M. Gupta, M.K. Surappa, S. Qin: J. Mater. Process. Technol., 1997, vol. 67, pp. 94–99.10.1016/S0924-0136(96)02825-7 ↗
4. M. Rahimian, N. Parvin, N. Ehsani: Mater. Sci. Eng. A, 2010, vol. 527, pp. 1031–1038.10.1016/j.msea.2009.09.034 ↗
5. H. Ahamed, V. Senthilkumar: Materials and Design, 2012, vol. 37, pp. 182–192.10.1016/j.matdes.2011.12.036 ↗
6. N. Nemati, R. Khosroshahi, M. Emamy, A. Zolriasatein: Materials and Design, 2011, vol. 32, pp. 3718–3729.10.1016/j.matdes.2011.03.056 ↗
7. J.B. Fogagnolo, M.H. Robert, J.M. Torralba: Mater. Sci. Eng. A, 2006, vol. 426, pp. 229–231.10.1016/j.msea.2006.03.074 ↗
8. N. Zhao, P. Nash, and X. Yang: J. Mater. Process. Technol., 2005, vol. 170, pp. 586–592.10.1016/j.jmatprotec.2005.06.037 ↗
9. P. Krizik1, M. Balog, I. Matko, P. Svec Sr, M. Cavojsky, and F. Simancik: J. Compos. Mater., 2015, pp. 1–10.
10. Z. Zhang, T. Topping, Y. Li, R. Vogt, Y. Zhou, C. Haines, J. Paras, D. Kapoor, J.M. Schoenung and E.J. Lavernia: Scripta Materialia, 2011, vol. 65, pp. 652–655.10.1016/j.scriptamat.2011.06.037 ↗
11. Y. Li, Z. Zhang, R. Vogt, J.M. Schoenung, E.J. Lavernia: Acta Materialia, 2011, vol. 59, pp. 7206–7218.10.1016/j.actamat.2011.08.005 ↗
12. C.L. Chen, Y.M. Dong: Mater. Sci. Eng. A, 2011, vol. 528, pp. 8374-8380.10.1016/j.msea.2011.08.041 ↗
13. X.L. Wang, G.F. Wang, K.F. Zhang: Mater. Sci. Eng. A, 2010, vol. 527, pp. 3253–3258.10.1016/j.msea.2010.02.031 ↗
14. R. Júarez, J.J Sũnol, R. Berlanga, J. Bonastre, L. Escoda. Journal of Alloys and Compounds, 2007, vol. 434-435, pp. 472-476.10.1016/j.jallcom.2006.08.108 ↗
15. Z. Oksiuta, N.J. Baluc: Journal of Nuclear Materials, 2009, vol. 386-388, pp. 426-429.10.1016/j.jnucmat.2008.12.148 ↗
16. C.L. Chen, C.L. Huang: International Journal of Refractory Metals and Hard Materials, 2014, vol. 44, pp. 19-26.10.1016/j.ijrmhm.2014.01.007 ↗
17. D. Jeyasimman, S. Sivasankaran, K. Sivaprasad, R. Narayanasamy, R.S. Kambali: Materials and Design, 2014, vol. 57, pp. 394–404.10.1016/j.matdes.2013.12.067 ↗
18. J.B. Fogagnolo, M.H. Robert, J.M. Torralba, Mater. Sci. Eng. A, 2006, vol. 426, pp. 85–94.10.1016/j.msea.2006.03.074 ↗
19. N. Parvina, R. Assadifarda, P. Safarzadeha, S. Sheibanib, P. Marashia: Mater. Sci. Eng. A, 2008, vol. 492, pp. 134–140.10.1016/j.msea.2008.05.004 ↗
20. Y. Wu, G.Y. Kim, A.M. Russell: Mater. Sci. Eng. A, 2012, vol. 538, pp. 164– 172.10.1016/j.msea.2012.01.025 ↗
21. H. Ahamed, V. Senthilkumar: Journal of Alloys and Compounds, 2010, vol. 505 pp. 772–782.10.1016/j.jallcom.2010.06.139 ↗
22. C. Suryanarayana: Norton MG. X-Ray Diffraction: A Practical Approach, Plenum Press, New York, 1998.10.1007/978-1-4899-0148-4 ↗
23. C.L. Chen, P. Wang, G.J. Tatlock: Materials at High Temperatures, 2009, vol. 26, pp. 299-303.10.3184/096034009X465211 ↗
24. C.L. Chen, G.J. Tatlock, A.R. Jones: Journal of Microscopy, 2009, vol. 233, pp. 474-481.10.1111/j.1365-2818.2009.03134.x ↗
25. C.L. Chen, G.J. Tatlock, and A.R. Jones: J. Alloys Compd., 2010, vol. 504S, pp. S460–S466.10.1016/j.jallcom.2010.02.192 ↗
26. Q. Wang, S. Grasso, C. Hu, H. Zhang, S. Cai, Y. Sakka, Q. Huang: Journal of Advanced Ceramics, 2013, vol. 2, pp. 193–200.10.1007/s40145-013-0061-1 ↗
27. L.B. Kong, J. Ma, H. Huang: Materials Letters, 2002, vol. 56, pp. 344–348.10.1016/S0167-577X(02)00480-9 ↗
28. X. Cao, J. Campbell: Materials Transactions, 2006, vol. 47, pp. 1303 – 1312.10.2320/matertrans.47.1303 ↗
29. N.C.W. Kuijpers, F.J. Vermolen, C. Vuik, P.T.G. Koenis, K.E. Nilsen, S. van der Zwaaga: Mater. Sci. Eng. A, 2005, vol. 394, pp. 9–19.10.1016/j.msea.2004.09.073 ↗
30. G.N. Haidemenopoulos, H. Kamoutsi, A.D. Zervaki: Journal of Materials Processing Technology, 2012, vol. 212, pp. 2255– 2260.10.1016/j.jmatprotec.2012.06.026 ↗