journal article·2020-10

On the Joint Formation and Interfacial Microstructure of Cold Metal Transfer Cycle Step Braze Welding of Aluminum to Steel Butt Joint

James Chen, Babak Shalchi Amirkhiz, Ruby Zhang, Brian Rona

Publisher page

Abstract

Cold metal transfer cycle step braze welding process was modified to successfully produce an aluminum alloy/Zn-coated steel linear joint with a closed square butt joint configuration. The braze-welded joint shows wide-spreading and low wetting angle of molten filler alloy on both sides of the steel. The butt joint is formed by the overlapping of individual spot braze welds during cold metal transfer cycle step braze welding. The microstructure at the front, backside, and face side interface of the Al/steel joint were characterized in terms of the crystal structure, morphology, and thickness of intermetallic compounds by scanning electron microscopy, analytical transmission electron microscopy, and energy dispersive X-ray spectroscopy. The interfacial structure of Al/τ5(H)-Al8Fe2Si(film-like)/θ-Al3Fe(rod-like)/θ-Al3Fe(500 nm)/η-Al5Fe2(2.5 µm)/Fe is formed at the front interface associated with high-temperature interaction between liquid Al alloy and Zn-coated steel. On the contrary, Al/τ5(C)-Al8(Fe,Mn)2Si/τ5(H)-Al8Fe2Si/θ-Al3Fe(1.2 µm)/η-Al5Fe2(500 nm)/Fe is present at the backside interface associated with relatively low-temperature interaction between liquid Al alloy and Zn-coated steel. The intermetallic compounds and morphology at the face interface associated with medium temperature interaction are similar to those at the backside interface. However, the thickness of the η-Al5Fe2 layer is only 220 nm, which is caused as a result of the interaction of molten Al filler alloy with the bare steel sheared surface without Zn coating. The mechanism for the formation of varied intermetallic compounds at the different interfaces is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. J. Ma, M. Harooni, B. Carlson, and R. Kovacevic: Materials and Design, 2014, vol. 58, pp. 390–401.10.1016/j.matdes.2014.01.046 ↗
2. D.R. Walmsley, Z.A. Munir, and A. Dean: Weld. J., 1985, pp. 104–12.
3. Z. Shen, Y. Ding, J. Chen, B.S. Amirkhiz, J.Z. Wen, L. Fu, and A.P. Gerlich: Journal of Materials Science & Technology, 2019, vol. 35, pp. 1027–38.10.1016/j.jmst.2019.01.001 ↗
4. C. Leitao, E. Arruti, E. Aldanondo, and D.M. Rodrigues: Materials and Design, 2016, vol. 106, pp. 153–60.10.1016/j.matdes.2016.05.101 ↗
5. H.T. Fujii, Y. Goto, Y.S. Sato, and H. Kokawa: Scripta Materialia, 2016, vol. 116, pp. 135–8.10.1016/j.scriptamat.2016.02.004 ↗
6. M.N. Avettand-Fènoël, C. Khalil, R. Taillard, and G. Racineux: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2018, vol. 49, pp. 2721–38.10.1007/s11661-018-4651-y ↗
7. J.L. Song, S.B. Lin, C.L. Yang, G.C. Ma, and H. Liu: Materials Science and Engineering A, 2009, vol. 509, pp. 31–40.10.1016/j.msea.2009.02.036 ↗
8. Z. Silvayeh, R. Vallant, C. Sommitsch, B. Götzinger, W. Karner, and M. Hartmann: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2017, vol. 48, pp. 5376–86.10.1007/s11661-017-4277-5 ↗
9. L. Li, H. Xia, C. Tan, and N. Ma: Journal of Materials Processing Technology, 2018, vol. 252, pp. 573–81.10.1016/j.jmatprotec.2017.10.025 ↗
10. J. Sun, Q. Yan, Z. Li, and J. Huang: Materials and Design, 2016, vol. 90, pp. 468–77.10.1016/j.matdes.2015.10.154 ↗
11. J. Sun, Q. Yan, W. Gao, and J. Huang: Materials and Design, 2015, vol. 83, pp. 120–8.10.1016/j.matdes.2015.05.069 ↗
12. M.J. Zhang, G.Y. Chen, Y. Zhang, and K.R. Wu: Materials and Design, 2013, vol. 45, pp. 24–30.10.1016/j.matdes.2012.09.023 ↗
13. B. Chen, H. Xia, X. Zhao, X. Song, L. Li, and C. Tan: Journal of Materials Processing Technology, 2018, vol. 258, pp. 9–21.10.1016/j.jmatprotec.2018.03.010 ↗
14. J. Yang, Y. Li, H. Zhang, W. Guo, D. Weckman, and N. Zhou: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2015, vol. 46, pp. 5149–57.10.1007/s11661-015-3079-x ↗
15. C. Zhang, X.Y. Zeng, J. Yan, M. Gao, G. Li, and S.W. Mei: Science and Technology of Welding and Joining, 2013, vol. 18, pp. 293–300.10.1179/1362171813Y.0000000106 ↗
16. C. Thomy and F. Vollertsen: 2007, pp. 1–18.10.2351/1.2164477 ↗
17. J. Xue, Y. Li, H. Chen, and Z. Zhu: Journal of Materials Processing Technology, 2018, vol. 255, pp. 47–54.10.1016/j.jmatprotec.2017.11.063 ↗
18. Y. Lu, E. Mayton, H. Song, M. Kimchi, and W. Zhang (2019) Materials and Design. 10.1016/j.matdes.2019.107585.10.1016/j.matdes.2019.107585 ↗
19. T. Tanaka, T. Morishige, and T. Hirata: Scripta Materialia, 2009, vol. 61, pp. 756–9.10.1016/j.scriptamat.2009.06.022 ↗
20. J. Chen, J. Li, B. Shalchi-Amirkhiz, J. Liang, and R. Zhang: Mater. Lett., 2014, vol. 137, pp. 120–3.10.1016/j.matlet.2014.08.102 ↗
21. K. Ikeuchi, M. Takahashi, H. Watanabe, and M. Aritushi: Welding in the World, 2009, vol. 53, pp. 135–9.10.1007/BF03266718 ↗
22. D. Krishnaja, M. Cheepu, and D. Venkateswarlu: IOP Conference Series: Materials Science and Engineering, 2018, vol. 330, pp. 0–16.10.1088/1757-899X/330/1/012073 ↗
23. H. Ma, G. Qin, L. Wang, X. Meng, and L. Chen: Materials and Design, 2016, vol. 90, pp. 330–9.10.1016/j.matdes.2015.10.144 ↗
24. G.C. Ma, J.L. Song, C.L. Fan, S.B. Lin, and C.L. Yang: Science and Technology of Welding and Joining, 2010, vol. 15, pp. 213–8.10.1179/136217110X12665048207610 ↗
25. Z. Ye, J. Huang, W. Gao, Y. Zhang, Z. Cheng, S. Chen, and J. Yang: Materials and Design, 2017, vol. 123, pp. 69–79.10.1016/j.matdes.2017.03.039 ↗
26. S. Chen, D. Yang, Z. Kang, J. Rong, J. Yang, and J. Huang: Materials Characterization, 2017, vol. 132, pp. 413–21.10.1016/j.matchar.2017.09.012 ↗
27. W.-J. Cheng and C.-J. Wang: Intermetallics, 2011, vol. 19, pp. 1455–60.10.1016/j.intermet.2011.05.013 ↗
28. X. Li, A. Scherf, M. Heilmaier, and F. Stein: Journal of Phase Equilibria and Diffusion, 2016, vol. 37, pp. 162–73.10.1007/s11669-015-0446-7 ↗
29. L.A. Jácome, S. Weber, A. Leitner, E. Arenholz, J. Bruckner: Adv. Eng. Mater., 2009, vol. 11, pp. 350–8.10.1002/adem.200800319 ↗
30. P.D. Clements, H. Clarke, R. W. Richards, R. D. Jones: Int. Mater. Rev., 1994, vol. 39, pp. 191–212.10.1179/imr.1994.39.5.191 ↗
31. S.P. Gupta: Materials Characterization, 2003, vol. 49, pp. 269–91.10.1016/S1044-5803(03)00006-8 ↗
32. Y. Du, J.C. Schuster, Z.K. Liu, R. Hu, P. Nash, W. Sun, W. Zhang, J. Wang, L. Zhang, C. Tang, Z. Zhu, S. Liu, Y. Ouyang, W. Zhang, and N. Krendelsberger: Intermetallics, 2008, vol. 16, pp. 554–70.10.1016/j.intermet.2008.01.003 ↗
33. Y. Li, P. Ochin, A. Quivy, P. Telolahy, and B. Legendre: Journal of Alloys and Compounds, 2000, vol. 298, pp. 198–202.10.1016/S0925-8388(99)00657-X ↗
34. H. Springer, A. Szczepaniak, and D. Raabe: Acta Materialia, 2015, vol. 96, pp. 203–11.10.1016/j.actamat.2015.06.028 ↗
35. S.B. Lin, J.L. Song, C.L. Yang, C.L. Fan, and D.W. Zhang: Materials and Design, 2010, vol. 31, pp. 2637–42.10.1016/j.matdes.2009.12.005 ↗
36. S.B. Lin, J.L. Song, C.L. Yang, C.L. Fan, and D.W. Zhang: Materials and Design, 2010, vol. 31, pp. 2637–42.10.1016/j.matdes.2009.12.005 ↗
37. G. Qin, Y. Ji, H. Ma, and Z. Ao: Journal of Materials Processing Tech., 2017, vol. 245, pp. 115–21.10.1016/j.jmatprotec.2017.02.022 ↗
38. Z. Ye, J. Huang, Z. Cheng, W. Gao, Y. Zhang, S. Chen, and J. Yang: Journal of Materials Processing Technology, 2017, vol. 250, pp. 25–34.10.1016/j.jmatprotec.2017.07.003 ↗
39. B. Mezrag, F. Deschaux-Beaume, and M. Benachour: Science and Technology of Welding and Joining, 2015, vol. 20, pp. 189–98.10.1179/1362171814Y.0000000271 ↗
40. H. Rezaei, M.R. Akbarpour, and H.R. Shahverdi: Jom, 2015, vol. 67, pp. 1443–50.10.1007/s11837-015-1435-3 ↗
41. S. Chen, D. Yang, M. Zhang, J. Huang, and X. Zhao: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2016, vol. 47, pp. 5088–100.10.1007/s11661-016-3667-4 ↗
42. A. Szczepaniak, J. Fan, A. Kostka, and D. Raabe: Advanced Engineering Materials, 2012, vol. 14, pp. 464–72.10.1002/adem.201200075 ↗
43. H. Springer, A. Kostka, E.J. Payton, D. Raabe, A. Kaysser-Pyzalla, and G. Eggeler: Acta Materialia, 2011, vol. 59, pp. 1586–600.10.1016/j.actamat.2010.11.023 ↗
44. S.B. Lin, J.L. Song, C.L. Yang, and G.C. Ma: Science and Technology of Welding and Joining, 2009, vol. 14, pp. 636–9.10.1179/136217109X12464549883493 ↗
45. A. Bouayad, C. Gerometta, A. Belkebir, and A. Ambari: Materials Science and Engineering A, 2003, vol. 363, pp. 53–61.10.1016/S0921-5093(03)00469-6 ↗
46. W.-J. Cheng and C.-J. Wang: Surface and Coatings Technology, 2011, vol. 205, pp. 4726–31.10.1016/j.surfcoat.2011.04.061 ↗
47. K. Bouché, F. Barbier, and A. Coulet: Materials Science and Engineering: A, 2002, vol. 249, pp. 167–75.10.1016/S0921-5093(98)00573-5 ↗
48. N. Takata, M. Nishimoto, S. Kobayashi, and M. Takeyama: Intermetallics, 2014, vol. 54, pp. 136–42.10.1016/j.intermet.2014.06.003 ↗
49. K. Bouché, F. Barbier, and A. Coulet: Materials Science and Engineering: A, 1998, vol. 249, pp. 167–75.10.1016/S0921-5093(98)00573-5 ↗
50. S.G. Shabestari: Materials Science and Engineering A, 2004, vol. 383, pp. 289–98.10.1016/S0921-5093(04)00832-9 ↗
51. H. Tanihata, T. Sugawara, K. Matsuda, and S. Ikeno: Journal of Materials Science, 1999, vol. 34, pp. 1205–10.10.1023/A:1004504805781 ↗