Failure Transition Mechanism of Stress Rupture Performance of the Inconel 625/9 Pct Cr Steel Dissimilar Welded Joint
Source abstract
Abstract
Based on a series of stress rupture tests at 620 °C under 110 to 170 MPa and at 650 °C under 80 to 110 MPa, the relationship between the stress and rupture time was obtained to evaluate the long-term performance of the welded joint (WJ). At 620 °C, the stress rupture occurred in the base metal of 9 pct Cr steel (9 pct Cr-BM), with the stress ranging from 130 to 170 MPa, yet the failure shifted to the heat-affected zone (HAZ) of 9 pct Cr steel (9 pct Cr-HAZ) with the stress ranging from 110 to 120 MPa. This failure behavior was observed at 650 °C with the turning point of 110 MPa. In particular, a ductile-to-brittle transition was determined when the rupture location shifted from 9 pct Cr-BM to 9 pct Cr-HAZ. Moreover, both the Laves phase adjacent to the M23C6 and the independent phases could be detected in the 9 pct Cr-HAZ after the stress rupture test, while only M23C6-type carbides could be found in the 9 pct Cr-BM. The appearance of the microhardness turning point and the formation of the Laves phase in the 9 pct Cr-HAZ are considered as the crucial factors resulting in the transition of the failure mode.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. 1.X.Z. Zhang, X. Wu, J.R. Liu, J. Liu, and M.X. Yao: Mater. Sci. Eng. A, 2017, vol. 706, pp. 279–86.10.1016/j.msea.2017.08.111 ↗
2. 2.P. Yan, Z.D. Liu, H.S. Bao, Y.Q. Weng, and W. Liu: Mater. Des., 2014, vol. 54, pp. 874–79.10.1016/j.matdes.2013.09.017 ↗
3. 3.I. Hajiannia, M. Shamanian, and M. Kasiri: Mater. Des., 2013, vol. 50, pp. 566–73.10.1016/j.matdes.2013.03.029 ↗
4. 4.K. Mo, G. Lovicu, X. Chen, H.-M. Tung, J.B. Hansen, and J.F. Stubbins: J. Nucl. Mater., 2013, vol. 441, pp. 695–703.10.1016/j.jnucmat.2013.03.083 ↗
5. 5.F.G. Lu, P. Liu, H.J. Ji, Y.M. Ding, X.J. Xu, and Y.L. Gao: Mater. Charact., 2014, vol. 92, pp. 149–58.10.1016/j.matchar.2014.03.014 ↗
6. 6.R.L. Klueh and D.J. Alexander: J. Nucl. Mater., 1998, vols. 258–263, pp. 1269–74.10.1016/S0022-3115(98)00319-5 ↗
7. 7.A. Zieliński, J. Dobrzański, H. Purzyńska, and G. Golański: Arch. Metall. Mater., 2016, vol. 61, pp. 957–64.10.1515/amm-2016-0163 ↗
8. A.C. Pandey, M.M. Giri, and A. Mahapatra: Mater. Sci. Eng. A, 2016, vol. 664, pp. 58–74.10.1016/j.msea.2016.03.132 ↗
9. 9.X. Liu, Z.P. Cai, X.L. Deng, and F.G. Lu: J. Mater. Res., 2017, vol. 32, pp. 3117–27.10.1557/jmr.2017.222 ↗
10. 10.K.H. Lee, J.Y. Suh, S.M. Hong, J.Y. Huh, and W.S. Jung: Mater. Charact., 2015, vol. 106, pp. 266–72.10.1016/j.matchar.2015.06.005 ↗
11. 11.X. Liu, F.G. Lu, R.J. Yang, P. Wang, X.J. Xu, and X. Huo: J. Mater. Eng. Perform., 2015, vol. 24, pp. 1434–40.10.1007/s11665-015-1428-y ↗
12. 12.J. Bugge, S. Kjær, and R. Blum: Energy, 2006, vol. 31, pp. 1437–45.10.1016/j.energy.2005.05.025 ↗
13. 13.A.K. Roy, M.H. Hasan, and J. Pal: Mater. Sci. Eng. A, 2009, vol. 520, pp. 184–88.10.1016/j.msea.2009.05.029 ↗
14. 14.X.Q. Song, L.Y. Tang, Z. Chen, and R.C. Zhou: J. Mater. Sci., 2017, vol. 52, pp. 4587–98.10.1007/s10853-016-0703-0 ↗
15. 15.X.L. Deng, F.G. Lu, H.C. Cui, X.H. Tang, and Z.G. Li: Mater. Sci. Eng. A, 2016, vol. 651, pp. 1018–30.10.1016/j.msea.2015.11.081 ↗
16. 16.Q. Guo, F.G. Lu, H.C. Cui, R.J. Yang, X. Liu, and X.H. Tang: J. Mater. Process. Technol., 2015, vol. 226, pp. 125–33.10.1016/j.jmatprotec.2015.06.004 ↗
17. 17.C.D. Shao, F.G. Lu, X.F. Wang, Y.M. Ding, and Z.G. Li: J. Mater. Sci. Technol., 2016, vol. 33, pp. 1610–20.10.1016/j.jmst.2016.12.001 ↗
18. 18.W. Liu, F.G. Lu, Y.H. Wei, Y.M. Ding, P. Wang, and X.H. Tang: Mater. Des., 2016, vol. 108, pp. 195–206.10.1016/j.matdes.2016.06.102 ↗
19. 19.M. Taneike, K. Sawada, and F. Abe: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1255–62.10.1007/s11661-004-0299-x ↗
20. 20.Q.F. He, Y.F. Ye, and Y. Yang: J. Phase Equilib. Diff., 2017, vol. 38, pp. 416–25.10.1007/s11669-017-0560-9 ↗
21. 21.L. Tan, D.T. Hoelzer, J.T. Busby, M.A. Sokolov, and R.L. Klueh: J. Nucl. Mater., 2012, vol. 422, pp. 45–50.10.1016/j.jnucmat.2011.12.011 ↗
22. 22.L. Tan, Y. Yang, and J.T. Busby: J. Nucl. Mater., 2013, vol. 442, pp. S13–S17.10.1016/j.jnucmat.2012.10.015 ↗
23. 23.S.S. Wang, D.L. Deng, L. Chang, and X.D. Hui: Mater. Des., 2013, vol. 50, pp. 174–80.10.1016/j.matdes.2013.01.072 ↗
24. 24.H. Wang, W. Yan, S.V. Zwaag, Q.Q. Shi, W. Wang, K. Yang, and Y.Y. Shan: Acta Mater., 2017, vol. 134, pp. 143–54.10.1016/j.actamat.2017.05.069 ↗
25. 25.L. Maddi, G.S. Deshmukh, A.R. Ballal, D.R. Peshwe, R.K. Paretkar, K. Laha, and M.D. Mathew: Mater. Sci. Eng. A, 2016, vol. 668, pp. 215–23.10.1016/j.msea.2016.05.074 ↗
26. 26.S. Zhu, M. Yang, X.L. Song, S. Tang, and Z.D. Xiang: Mater. Charact., 2014, vol. 98, pp. 60–65.10.1016/j.matchar.2014.10.004 ↗
27. 27.G. Dimmler, P. Weinert, E. Kozeschnik, and H. Cerjak: Mater. Charact., 2003, vol. 51, pp. 341–52.10.1016/j.matchar.2004.02.003 ↗
28. 28.O. Prat, J. Garcia, D. Rojas, G. Suauthoff, and G. Inden: Intermetallics, 2013, vol. 32, pp. 362–72.10.1016/j.intermet.2012.08.016 ↗
29. 29.Z.F. Peng, S. Liu, C. Yang, F.Y. Chen, and F.F. Peng: Acta Mater., 2018, vol. 143, pp. 141–55.10.1016/j.actamat.2017.10.010 ↗
30. 30.S.K. Rai, A. Kumar, V. Shankar, T. Jayakumar, and K.B.S. Rao: Scripta Mater., 2004, vol. 51, pp. 59–63.10.1016/j.scriptamat.2004.03.017 ↗
31. 31.Ö. Özgün, H.Ö. Gülsoy, R. Yilmaz, and F. Findik: J. Alloy. Compd., 2013, vol. 546, pp. 192–207.10.1016/j.jallcom.2012.08.069 ↗
32. 32.A. Mostafaei, Y. Behnamian, Y.L. Krimer, E.L. Stevens, J.L. Luo, and M. Chmielus: Mater. Des., 2016, vol. 111, pp. 482–91.10.1016/j.matdes.2016.08.083 ↗
33. 33.L.M. Suave, J. Cormier, P. Villechaise, S. Aurélie, H. Zéline, and D. Bertheau: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 2963–82.10.1007/s11661-014-2256-7 ↗
34. 34.P.H. Wang, J.M. Chen, H.Y. Fu, S. Liu, H.W. Li, and Z.Y. Xu: J. Nucl. Mater., 2013, vol. 442, pp. S9–S12.10.1016/j.jnucmat.2013.03.081 ↗
35. 35.I.J. Moore, M.G. Burke, and E.J. Palmiere: Acta Mater., 2016, vol. 119, pp. 157–66.10.1016/j.actamat.2016.08.027 ↗
36. 36.Z.X. Xia, C. Zhang, H. Lan, Z.G. Yang, P.H. Wang, J.M. Chen, Z.Y. Xu, X.W. Li, and S. Liu: Mater. Sci. Eng. A, 2010, vol. 528, pp. 657–62.10.1016/j.msea.2010.09.088 ↗
37. 37.K. Ding, P. Wang, X. Liu, X.H. Li, B.G. Zhao, and Y.L. Gao: J. Mater. Eng. Perform., 2018, vol. 27 pp. 6027–39.10.1007/s11665-018-3668-0 ↗
38. 38.Q. Guo, F.G. Lu, X. Liu, R.J. Yang, H.C. Cui, and Y.L. Gao: Mater. Sci. Eng. A, 2015, vol. 638, pp. 240–50.10.1016/j.msea.2015.04.011 ↗
39. 39.Q.J. Wu, F.G. Lu, H.C. Cui, Y.M. Ding, X. Liu, and Y.L. Gao: Mater. Sci. Eng. A, 2014, vol. 615, pp. 98–106.10.1016/j.msea.2014.07.067 ↗
40. 40.H.G. Dong, P.X. Wang, X.H. Hao, S. Li, P. Li, Y.L. Gao, B.G. Zhao, and D.J. Yan: Mater. Lett., 2018, vol. 228, pp. 407–10.10.1016/j.matlet.2018.06.070 ↗
41. 41.K. Ding, H.J. Ji, X. Liu, P. Wang, Q.L. Zhang, X.H. Li, and Y.L. Gao: J. Iron Steel Res. Int., 2018, vol. 25 pp. 847–53.10.1007/s42243-018-0124-1 ↗
42. 42.K. Ding, H.J. Ji, Q.L. Zhang, X. Liu, P. Wang, X.H. Li, L. Zhang, and Y.L. Gao: J. Iron Steel Res. Int., 2018, vol. 25, pp. 839–46.10.1007/s42243-018-0121-4 ↗
43. 43.Q.J. Wu, F.G. Lu, H.C. Cui, X. Liu, P. Wang, and Y.L. Gao: Mater. Lett., 2015, vol. 141, pp. 242–44.10.1016/j.matlet.2014.08.158 ↗
44. 44.H.K. Ji, Y.J. Oh, I.S. Hwang, J.K. Dong, and J.T. Kim: J. Nucl. Mater., 2001, vol. 299, pp. 132–39.10.1016/S0022-3115(01)00688-2 ↗
45. A. Laha, K.S. Chandrevathi, P. Parameswaran, K. BhanuSankaraRao, and S.L. Mannan: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 58–68.10.1007/s11661-006-9050-0 ↗
46. 46.T. Watanabe, M. Tabuchi, M. Yamazaki, H. Hongo, and T. Tanabe: Int. J. Press. Vessel. Pip., 2006, vol. 83, pp. 63–71.10.1016/j.ijpvp.2005.09.004 ↗
47. 47.Y.H. Wei, S.F. Qiao, F.G. Lu, and W. Liu: Mater. Des., 2016, vol. 97, pp. 268–78.10.1016/j.matdes.2016.02.107 ↗
48. 48.P. Dahlman, F. Gunnberg, and M. Jacobson: J. Mater. Process. Technol., 2004, vol. 147, pp. 181–84.10.1016/j.jmatprotec.2003.12.014 ↗
49. 49.J. Hua, R. Shivpuri, X.M. Cheng, V. Bedekar, Y. Matsumoto, F. Hashimoto, and T.R. Watkins: Mater. Sci. Eng. A, 2005, vol. 394, pp. 238–48.10.1016/j.msea.2004.11.011 ↗
50. 50.W. Liu, X. Liu, F.G. Lu, X.H. Tang, H.C. Cui, and Y.L. Gao: Mater. Sci. Eng. A, 2015, vol. 644, pp. 337–46.10.1016/j.msea.2015.07.068 ↗
51. 51.P. Liu, F.G. Lu, X. Liu, H.J. Ji, and Y.L. Gao: J. Alloys Compd., 2014, vol. 584, pp. 430–37.10.1016/j.jallcom.2013.09.048 ↗
52. 52.A. Elrefaey, Y. Javadi, J.A. Francis, M.D. Callaghan, and A.J. Leonard: Int. J. Press. Vessel. Pip., 2018, vol. 165 pp. 20–28.10.1016/j.ijpvp.2018.05.006 ↗
53. 53.C.G. Panait, W. Bendick, A. Fuchsmann, A.F. Gourgues-Lorenzon, and J. Besson: Int. J. Press. Vessel. Pip., 2010, vol. 87, pp. 326–35.10.1016/j.ijpvp.2010.03.017 ↗
54. 54.H.G. Armaki, R. Chen, K. Maruyama, and M. Igarashi: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 3084–94.10.1007/s11661-011-0726-8 ↗
55. 55.X. Wang, X. Wang, H.J. Li, H.L. Wu, Y.Y. Ren, H.W. Liu, and H. Liu: Weld. World, 2017, vol. 61 pp. 231–39.10.1007/s40194-017-0424-2 ↗
56. 56.J.S. Lee, H.G. Armaki, K. Maruyama, T. Muraki, and H. Asahi: Mater. Sci. Eng. A, 2006, vol. 428, pp. 270–75.10.1016/j.msea.2006.05.010 ↗
57. 57.D. Rojas, J. Garcia, O. Prat, L. Agudo, and C. Carrasco: Mater. Sci. Eng. A, 2011, vol. 528, pp. 1372–81.10.1016/j.msea.2010.10.028 ↗
58. 58.K. Shinozaki, L.I. De-Jun, H. Kuroki, H. Harada, and K. Ohishi: ISIJ Int., 2002, vol. 42, pp. 1578–84.10.2355/isijinternational.42.1578 ↗
59. 59.Y.T. Xu, Y.H. Nie, M.J. Wang, W. Li, and X.J. Jin: Acta Mater., 2017, vol. 131, pp. 110–22.10.1016/j.actamat.2017.03.045 ↗
60. 60.M.I. Isik, A. Kostka, and G. Enggeler: Acta Mater., 2014, vol. 81, pp. 230–40.10.1016/j.actamat.2014.08.008 ↗