journal article·2019-04-15Open access

Getting the Strain Under Control: Trans-Varestraint Tests for Hot Cracking Susceptibility

Dimitrios Statharas, Helen Atkinson, Rob Thornton, John Marsden, Hongbiao Dong, Shuwen Wen

Abstract

Abstract A new method for conducting Trans-Varestraint tests for assessing hot cracking susceptibility is proposed. Experiments were carried out, to validate the new method, with an industrial scale rig using tungsten inert gas welding. The hot cracking susceptibility of API-5L X65 and EN3B steel was compared. The results indicated that, by using the new method, the strain applied to the welding bead and consequently to the solidification front was controlled in a repeatable and reliable way. The results also indicated that EN3B has a maximum crack length (a parameter in the test) higher than X65 and it is reached at lower augmented strain thus demonstrating it is more susceptible to hot cracking, while also indicating that there is a capability of predicting the initiation position of hot cracks during welding. By using the method proposed, the capability of setting standardized test procedures for Trans-Varestraint tests is improved. It is recommended that future tests for assessing hot cracking susceptibility should employ the proposed method in order for the results to be comparable and to also study the effect of strain rate in hot cracking of materials.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. A. Bochvar, N. Rykalin, N. Prokhorov, I. Novikov and B. Movchan: Welding Production 1960, vol. 10, pp. 5-7.
2. N. Prokhorov and N.N. Prokhorov: Transactions of the Japan Welding Society 1971, vol. 2, pp. 205-213.
3. T. Senda, F. Matsuda, G. Takano, K. Watanabe, T. Kobayashi, and T. Matsuzaka: Trans. Jpn. Weld. Soc., 1971, vol. 2, pp. 141–62.
4. Y. Arata, F. Matsuda, H. Nakagawa, S. Katayama and S. Ogata: Transactions of JWRI 1977, vol. 6, pp. 197-206.
5. Y. Arata, F. Matsuda, H. Nakagawa and S. Katayama: Transactions of JWRI 1978, vol. 7, pp. 169-172.
6. F. Matsuda, H. Nakagawa, T. Uehara, S. Katayama and Y. Arata: Transactions of JWRI 1979, vol. 8, pp. 105-112.
7. F. Matsuda, S. Katayama and Y. Arata: Transactions of JWRI 1983, vol. 12, pp. 247-252.
8. F. Hull: Welding Journal 1959, vol. 38, pp. 176s-181s.
9. B. Alexandrov and J. Lippold, In Hot Cracking Phenomena in Welds III, Springer, Berlin, 2011, pp. 317–31.10.1007/978-3-642-16864-2_16 ↗
10. M.G. Collins and J.C. Lippold: Welding Journal 2003, vol. 82, pp. 288s-295s.
11. S. Mandziej, In Hot Cracking Phenomena in Welds, Springer, 2005, pp. 347–76.
12. F. Mohammadi, F.F. Eliyan and A. Alfantazi: Corrosion Science 2012, vol. 63, pp. 323-333.10.1016/j.corsci.2012.06.014 ↗
13. J.C. Lippold: Joining of Advanced and Specialty Materials VII, 2005. https://www.asminternational.org/documents/10192/1849770/5116_01_WEBa.pdf.
14. L. Aucott, D. Huang, H.B. Dong, S.W. Wen, J. Marsden, A. Rack, and A.C.F. Cocks: Metall. Mater. Trans. A, 2018, vol. 49, pp. 1674–82.10.1007/s11661-018-4529-z ↗
15. L. Aucott, D. Huang, H.B. Dong, S.W. Wen, J.A. Marsden, A. Rack and A.C. Cocks: Sci Rep 2017, vol. 7, p. 40255.10.1038/srep40255 ↗
16. E. Bayraktar, D. Kaplan, L. Devillers and J.P. Chevalier: Journal of Materials Processing Technology 2007, vol. 189, pp. 114-125.10.1016/j.jmatprotec.2007.01.012 ↗
17. T.W. Nelson, J.C. Lippold and M.J. Mills: Welding Journal 1999, vol. 78, pp. 329s-337s.
18. Y.Z. Zhou, A. Volek and N.R. Green: Acta Materialia 2008, vol. 56, pp. 2631-2637.10.1016/j.actamat.2008.02.022 ↗
19. A. Stangeland, A. Mo, O. Nielsen, D. Eskin, and M. M’hamdi: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2903–15.10.1007/s11661-004-0238-x ↗
20. G. Reinhart, A. Buffet, H. Nguyen-Thi, B. Billia, H. Jung, N. Mangelinck-Noël, N. Bergeon, T. Schenk, J. Härtwig and J. Baruchel: Metallurgical and Materials Transactions A 2008, vol. 39, pp. 865-874.10.1007/s11661-007-9449-2 ↗
21. C. Iso: Destructive Tests on Welds in Metallic Materials–Hot Cracking Tests for Weldments–Arc Welding Processes–Part 3: Externally Loaded Tests, vol. 3, International Organization for Standardization, 2005.
22. H. Tamura, N. Kato, S. Ochiai, and Y. Katagiri: Trans. Jpn. Weld. Soc., 1977, vol. 8, pp. 143–49.
23. T. Ogawa and E. Tsunetomi: in 10th Golden Gate Metals and Welding Conference, San Francisco, 1979.
24. W. Savage and C. Lundin: Weld. J., 1965, vol. 44, pp. 433–42.
25. J. Andersson, J. Jacobsson, A. Brederholm and H. Hänninen: in Cracking Phenomena in Welds iv, 2016, pp. 25–36.10.1007/978-3-319-28434-7_2 ↗
26. S. Goodman, J. Lee and E. Nichols: Welding Journal 1968, vol. 47, pp. 371–77.
27. R.A. Owen, R.V. Preston, P.J. Withers, H.R. Shercliff and P.J. Webster: Mat Sci Eng a-Struct 2003, vol. 346, pp. 159-167.10.1016/S0921-5093(02)00547-6 ↗
28. J.C. Lippold and W.M. Lin: in Mater. Sci. Forum, Trans Tech Publ: 1996, pp 1685–90.10.4028/www.scientific.net/MSF.217-222.1685 ↗
29. T. Boellinghaus, H. Herold, C.E. Cross and J.C. Lippold: Hot cracking phenomena in welds ii. (Springer Berlin Heidelberg, 2008).10.1007/978-3-540-78628-3 ↗
30. C.L.M.D. Silva and A. Scotti: Measurement Science and Technology 2004, vol. 15, pp. 2215-2223.10.1088/0957-0233/15/11/006 ↗
31. D. Hayduk, B.K. Damkrocer, G.R. Edwards and D.L. Olson: Welding Journal 1986, vol. 65, pp. 251–60.
32. V. Shankar, T.P.S. Gill, S.L. Mannan and S. Sundaresan: Science and Technology of Welding and Joining 2013, vol. 5, pp. 91-97.10.1179/136217100101538074 ↗
33. American Petroleum Institute (Api), American Petroleum Institute (API), 2000.
34. G. Murry: Traitement Thermique(France), 1992, pp. 35–39.
35. G. Srinivasan, M. Divya, S.K. Albert, A.K. Bhaduri, A. Klenk and D.R.G. Achar: Welding in the World 2010, vol. 54, pp. R322-R332.10.1007/BF03266746 ↗
36. E.J. Chun, H. Baba, K. Nishimoto and K. Saida: Metals and Materials International 2015, vol. 21, pp. 543-553.10.1007/s12540-015-4394-x ↗
37. D. Rosenthal: Welding Journal 1941, vol. 20, pp. 220-234.
38. J.C. Lippold, T. Boellinghaus and C.E. Cross: Hot cracking phenomena in welds iii. (Springer Berlin Heidelberg, 2011).
39. T. Boellinghaus, J.C. Lippold, and C.E. Cross: Cracking Phenomena in Welds IV, Springer, Berlin, 2016, pp. 38–39.10.1007/978-3-319-28434-7 ↗
40. N.E. Nissley and J.C. Lippold: Welding journal 2003, vol. 82, pp. 355-364.
41. M. Collins and J. Lippold: Weld. J., 2003, vol. 82, pp. 288–95.
42. J.C. Lippold, J.W. Sowards, G.M. Murray, B.T. Alexandrov, and A.J. Ramirez: in 2007 2nd International Workshop on Hot Cracking Phenomena in Welds, Springer, Berlin, 2008, pp. 147–70.
43. C.E. Cross and N. Coniglio: in 2007 2nd International Workshop on Hot Cracking Phenomena in Welds, Springer, Berlin, 2008, pp 39–58.
44. L. Aucott, S. Wen, and H. Dong: in ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering, San Francisco, California, USA, 2014.
45. L. Aucott, S.W. Wen and H. Dong: Materials Science and Engineering: A 2015, vol. 622, pp. 194-203.10.1016/j.msea.2014.10.057 ↗
46. V. Quiroz, A. Gumenyuk and M. Rethmeier: The Journal of Strain Analysis for Engineering Design 2012, vol. 47, pp. 587-599.10.1177/0309324712462120 ↗
47. T. Soysal and S. Kou: Acta Materialia 2018, vol. 143, pp. 181-197.10.1016/j.actamat.2017.09.065 ↗
48. S. Kou: Welding metallurgy. Second ed., John Wiley & Sons, Inc., New York, 2003.