journal article·2019-02-15Open access

Crystallographic Orientation Relationship with Geometrically Necessary Dislocation Accumulation During High-Temperature Deformation in RR1000 Nickel-Based Superalloy

Soran Birosca

Abstract

Abstract In the current study, it is demonstrated that soft grains along 〈100〉 fiber provided a pure shear condition for easy dislocation movement leading to a relatively low dislocation density. The hard grains along the 〈111〉 fiber, however, were not favorably oriented for slip system activation and caused high dislocation accumulation. It is concluded that the average overall dislocation density does not provide a meaningful value, as it is largely dependent on the original material crystallographic texture, the numbers of hard and soft grains in the electron backscatter diffraction (EBSD) mapped area, and the grain size factor.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. F. Daus, H.Y. Li, G. Baxter, S. Bray, and P. Bowen: Mater. Sci. Technol., 2007, 23 (12), pp. 1424–32.10.1179/174328407X243997 ↗
2. D.M. Knowles and D.W. Hunt: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 3165–72.10.1007/s11661-002-0302-3 ↗
3. B. Lin, L.G. Zhao, and J. Tong: Eng. Fract. Mech., 2011, vol. 78, pp. 2174–92.10.1016/j.engfracmech.2011.04.006 ↗
4. B. Lin, L.G. Zhaoa, J. Tonga, and H.-J. Christ: Mater. Sci. Eng. A, 2010, vol. 527, pp. 3581–87.10.1016/j.msea.2010.02.045 ↗
5. D. Turan, D. Hunt, and D.M. Knowles: Mater. Sci. Technol., 2007, 23 (2), pp. 183–88.10.1179/174328407X154257 ↗
6. H.T. Pang and P.A.S. Reed: Int. J. Fatigue, 2003, vol. 25, pp. 1089–99.10.1016/S0142-1123(03)00146-4 ↗
7. C. Rae and R. Reed: Acta Mater., 2007, vol. 55, pp. 1067–81.10.1016/j.actamat.2006.09.026 ↗
8. F. Pyczak, B. Devrient, F. Neuner, and H. Mughrabi: Acta Mater., 2005, 53 (14), pp. 3879–91.10.1016/j.actamat.2005.04.041 ↗
9. J. Wosik, B. Dubiel, A. Kruk, H. Penkalla, F. Schubert, and F. Czyrska: Mater. Charact., 2001, 46 (2), pp. 119–23.10.1016/S1044-5803(01)00112-7 ↗
10. W. Pantleon: Scripta Mater., 2008, vol. 58, pp. 994–97.10.1016/j.scriptamat.2008.01.050 ↗
11. J. Jiang, B. Britton, and A. Wilkinson: Acta Mater., 2013, vol. 61, pp. 7227–39.10.1016/j.actamat.2013.08.027 ↗
12. H. Gao, Y. Huang, W. Nix, and J. Hutchinson: J. Mech. Phys. Solids, 1999, vol. 47, pp. 1239–63.10.1016/S0022-5096(98)00103-3 ↗
13. H. Gao and Y. Huang: Scripta Mater., 2003, vol. 48, pp. 113–18.10.1016/S1359-6462(02)00329-9 ↗
14. Y. Guo, B. Britton, and A. Wilkinson: Acta Mater., 2014, vol. 76, pp. 1–12.10.1016/j.actamat.2014.05.015 ↗
15. A. Arsenlis and D. Parks: Acta Mater., 1999, 47 (5), pp. 1597–611.10.1016/S1359-6454(99)00020-8 ↗
16. S. Sun, B. Adams, and W.E. King: Phil. Mag., 2000, 80 (1), pp. 9–25.10.1080/01418610008212038 ↗
17. M. Ashby: Phil. Mag., 1970, 21 (170), pp. 399–424.10.1080/14786437008238426 ↗
18. C. Zhu, T. Harrington, G. Gray III and K. Vecchio: Acta Mater., 2018, vol. 155, pp. 104–16.10.1016/j.actamat.2018.05.022 ↗
19. J. Jiang, T.B. Britton, and A.J. Wilkinson: Ultramicroscopy, 2013, vol. 125, pp. 1–9.10.1016/j.ultramic.2012.11.003 ↗
20. D. Kerr: Ph.D. Thesis, Swansea University Library, United Kingdom, 2013.
21. S. Birosca, F. Gioacchino, S. Stekovic, and M. Hardy: Acta Mater., 2014, vol. 74, pp. 110–24.10.1016/j.actamat.2014.04.039 ↗
22. G. Liu, J. Canto, S. Winwood, K. Rhodes, and S. Birosca: Acta Mater., 2018, 148, pp. 391–406.10.1016/j.actamat.2018.01.062 ↗
23. S. Birosca: IOP Conf. Series: Materials Science and Engineering, ICOTOM-17 Conf. Proc., 17th Int. Conf. on Texture of Materials, Dresden, Germany, IOP Publishing. 2015, vol. 82. p. 012033.10.1088/1757-899X/82/1/012033 ↗