Evaluation of Carbon Partitioning in New Generation of Quench and Partitioning (Q&P) Steels
Source abstract
Abstract
Quenching and partitioning (Q&P) and a novel combined process of hot straining (HS) and Q&P (HSQ&P) treatments have been applied to a TRIP-assisted steel in a Gleeble®3S50 thermomechanical simulator. The heat treatments involved intercritical annealing at 800 °C and a two-step Q&P heat treatment with a partitioning time of 100 seconds at 400 °C. The “optimum” quench temperature of 318 °C was selected according to the constrained carbon equilibrium (CCE) criterion. The effects of high-temperature deformation (isothermal and non-isothermal) on the carbon enrichment of austenite, carbide formation, and the strain-induced transformation to ferrite (SIT) mechanism were investigated. Carbon partitioning from supersaturated martensite into austenite and carbide precipitation were confirmed by means of atom probe tomography (APT) and scanning transmission electron microscopy (STEM). Austenite carbon enrichment was clearly observed in all specimens, and in the HSQ&P samples, it was significantly greater than in Q&P, suggesting an additional carbon partitioning to austenite from ferrite formed by the deformation-induced austenite-to-ferrite transformation (DIFT) phenomenon. By APT, the carbon accumulation at austenite/martensite interfaces was observed, with higher values for HSQ&P deformed isothermally (≈ 11 at. pct), when compared with non-isothermal HSQ&P (≈ 9.45 at. pct) and Q&P (≈ 7.6 at. pct). Moreover, a local Mn enrichment was observed in a ferrite/austenite interface, indicating ferrite growth under local equilibrium with negligible partitioning (LENP).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. C. Wang, H. Ding, M. Cai, and B. Rolfe: Mater. Sci. Eng. A, 2014, vol. 610, pp. 436–44.10.1016/j.msea.2014.05.063 ↗
2. R. Blondé, E. Jimenez-Melero, L. Zhao, N. Schell, E. Brück, S. van der Zwaag, and N.H. van Dijk: Mater. Sci. Eng. A, 2014, vol. 594, pp. 125–34.10.1016/j.msea.2013.11.001 ↗
3. J.-C. Hell, M. Dehmas, S. Allain, J.M. Prado, A. Hazotte, and J.-P. Chateau: ISIJ Int., 2011, vol. 51, pp. 1724–32.10.2355/isijinternational.51.1724 ↗
4. Z.H. Cai, H. Ding, R.D.K. Misra, and Z.Y. Ying: Acta Mater., 2015, vol. 84, pp. 229–36.10.1016/j.actamat.2014.10.052 ↗
5. P.J. Gibbs, E. De Moor, M.J. Merwin, B. Clausen, J.G. Speer, and D.K. Matlock: Metall. Mater. Trans. A, 2011, vol. 42, pp. 3691–3702.10.1007/s11661-011-0687-y ↗
6. E. Jimenez-Melero, N.H. van Dijk, L. Zhao, J. Sietsma, S.E. Offerman, J.P. Wright, and S. van der Zwaag: Acta Mater., 2007, vol. 55, pp. 6713–23.10.1016/j.actamat.2007.08.040 ↗
7. Y. Matsuoka, T. Iwasaki, N. Nakada, T. Tsuchiyama, and S. Takaki: ISIJ Int., 2013, vol. 53, pp. 1224–30.10.2355/isijinternational.53.1224 ↗
8. I.B. Timokhina, P.D. Hodgson, and E. V. Pereloma: Metall. Mater. Trans. A, 2004, vol. 35, pp. 2331–41.10.1007/s11661-006-0213-9 ↗
9. R. Blondé, E. Jimenez-Melero, L. Zhao, J.P. Wright, E. Brück, S. van der Zwaag, and N.H. van Dijk: Acta Mater., 2012, vol. 60, pp. 565–77.10.1016/j.actamat.2011.10.019 ↗
10. R. Blondé, E. Jimenez-Melero, R. Huizenga, L. Zhao, J. Wright, E. Bruck, S. van der Zwaag, and N. van Dijk: Mater. Sci. Eng. A, 2014, vol. 47, pp. 965–73.
11. H.L. Yi, P. Chen, and H.K.D.H. Bhadeshia: Metall. Mater. Trans. A, 2014, vol. 45, pp. 3512–18.10.1007/s11661-014-2267-4 ↗
12. H.S. Park, J.C. Han, N.S. Lim, and C.G. Park: Mater. Sci. Eng. A, 2015, vol. 627, pp. 262–69.10.1016/j.msea.2015.01.005 ↗
13. G. Gao, H. Zhang, X. Gui, P. Luo, Z. Tan, and B. Bai: Acta Mater., 2014, vol. 76, pp. 425–33.10.1016/j.actamat.2014.05.055 ↗
14. Y.F. Shen, Y.D. Liu, X. Sun, Y.D. Wang, L. Zuo, and R.D.K. Misra: Mater. Sci. Eng. A, 2013, vol. 583, pp. 1–10.10.1016/j.msea.2013.06.062 ↗
15. X.C. Xiong, B. Chen, M.X. Huang, J.F. Wang, and L. Wang: Scr. Mater., 2013, vol. 68, pp. 321–24.10.1016/j.scriptamat.2012.11.003 ↗
16. M. Villa, K. Pantleon, and M.A.J. Somers: J. Alloys Compd., 2013, vol. 577, pp. S543–8.10.1016/j.jallcom.2011.12.162 ↗
17. N. Nakada, Y. Ishibashi, T. Tsuchiyama, and S. Takaki: Acta Mater., 2016, vol. 110, pp. 95–102.10.1016/j.actamat.2016.03.048 ↗
18. J. Speer, D.K. Matlock, B.C. De Cooman, and J.G. Schroth: Acta Mater., 2003, vol. 51, pp. 2611–22.10.1016/S1359-6454(03)00059-4 ↗
19. A.J. Clarke, J.G. Speer, M.K. Miller, R.E. Hackenberg, D.V. Edmonds, D.K. Matlock, F.C. Rizzo, K.D. Clarke, and E. De Moor: Acta Mater., 2008, vol. 56, pp. 16–22.10.1016/j.actamat.2007.08.051 ↗
20. M. Hillert and J. Ågren: Scr. Mater., 2004, vol. 50, pp. 697–99.10.1016/j.scriptamat.2003.11.020 ↗
21. J.G. Speer, D.K. Matlock, B.C. DeCooman, and J.G. Schroth: Scr. Mater., 2005, vol. 52, pp. 83–85.10.1016/j.scriptamat.2004.08.029 ↗
22. M. Hillert and J. Ågren: Scr. Mater., 2005, vol. 52, pp. 87–8.10.1016/j.scriptamat.2004.08.026 ↗
23. G. a. Thomas, J.G. Speer, and D.K. Matlock: Metall. Mater. Trans. A, 2011, vol. 42, pp. 3652–59.10.1007/s11661-011-0648-5 ↗
24. S. Kim, J. Lee, F. Barlat, and M.G. Lee: Acta Mater., 2016, vol. 109, pp. 394–404.10.1016/j.actamat.2015.11.051 ↗
25. F. HajyAkbary, J. Sietsma, G. Miyamoto, T. Furuhara, and M.J. Santofimia: Acta Mater., 2016, vol. 104, pp. 72–83.10.1016/j.actamat.2015.11.032 ↗
26. E.J. Seo, L. Cho, and B.C. De Cooman: Acta Mater., 2016, vol. 107, pp. 354–65.10.1016/j.actamat.2016.01.059 ↗
27. Y. Toji, G. Miyamoto, and D. Raabe: Acta Mater., 2015, vol. 86, pp. 137–47.10.1016/j.actamat.2014.11.049 ↗
28. D.T. Pierce, D.R. Coughlin, D.L. Williamson, K.D. Clarke, a J. Clarke, and J.G. Speer: Acta Mater., 2015, vol. 90, pp. 1–14.10.1016/j.actamat.2015.01.024 ↗
29. H. Liu, H. Sun, B. Liu, D. Li, F. Sun, and X. Jin: Mater. Des., 2015, vol. 83, pp. 760–7.10.1016/j.matdes.2015.06.047 ↗
30. M. Karam-Abian, A. Zarei-Hanzaki, H.R. Abedi, and S. Heshmati-Manesh: Mater. Sci. Eng. A, 2016, vol. 651, pp. 233–40.10.1016/j.msea.2015.10.116 ↗
31. Y. Chang, G. Li, C. Wang, X. Li, and H. Dong: J. Mater. Eng. Perform., 2015, vol. 24, pp. 3194–3200.10.1007/s11665-015-1579-x ↗
32. H. Liu, X. Lu, X. Jin, H. Dong, and J. Shi: Scr. Mater., 2011, vol. 64, pp. 749–52.10.1016/j.scriptamat.2010.12.037 ↗
33. H. Liu, X. Jin, H. Dong, and J. Shi: Mater. Charact., 2011, vol. 62, pp. 223–27.10.1016/j.matchar.2010.12.003 ↗
34. E.A. Ariza, A.S. Nishikawa, H. Goldenstein, and A.P. Tschiptschin: Mater. Sci. Eng. A, 2016, vol. 671, pp. 54–69.10.1016/j.msea.2016.06.038 ↗
35. D. De Knijf, R. Petrov, C. Föjer, and L.A.I. Kestens: Mater. Sci. Eng. A, 2014, vol. 615, pp. 107–15.10.1016/j.msea.2014.07.054 ↗
36. E.J. Seo, L. Cho, and B.C. De Cooman: Acta Mater., 2016, vol. 107, pp. 354–65.10.1016/j.actamat.2016.01.059 ↗
37. G.A. Thomas, F. Danoix, J.G. Speer, S.W. Thompson, and F. Cuvilly: ISIJ Int., 2014, vol. 54, pp. 2900–06.10.2355/isijinternational.54.2900 ↗
38. Y. Toji, H. Matsuda, M. Herbig, P.-P. Choi, and D. Raabe: Acta Mater., 2014, vol. 65, pp. 215–28.10.1016/j.actamat.2013.10.064 ↗
39. H. Dong and X. Sun: Curr. Opin. Solid State Mater. Sci., 2005, vol. 9, pp. 269–76.10.1016/j.cossms.2006.02.014 ↗
40. C. Ghosh, V. V. Basabe, J.J. Jonas, Y.M. Kim, I.H. Jung, and S. Yue: Acta Mater., 2013, vol. 61, pp. 2348–62.10.1016/j.actamat.2013.01.006 ↗
41. A. Bardelcik, M.J. Worswick, and M.A. Wells: Math. Des., 2014, vol. 55, pp. 509–25.10.1016/j.matdes.2013.10.014 ↗
42. E.A. Ariza, M. Masoumi, and A.P. Tschiptschin: Mater. Sci. Eng. A, 2017, vol. 713, pp. 223–33.10.1016/j.msea.2017.12.046 ↗
43. K. Thompson, D. Lawrence, D.J. Larson, J.D. Olson, T.F. Kelly, and B. Gorman: Ultramicroscopy, 2007, vol. 107, pp. 131–39.10.1016/j.ultramic.2006.06.008 ↗
44. G. Thomas, J. Speer, D. Matlock, and J. Michael: Microsc. Microanal., 2011, vol. 17, pp. 368–73.10.1017/S1431927610094432 ↗
45. W. Poling, V. Savic, L. Hector, A. Sachdev, X. Hu, A. Devaraj, and F. Abu-Farha: SAE 2016 World Congress and Exhibition, 2016. https://doi.org/10.4271/2016-01-0419.10.4271/2016-01-0419 ↗
46. D. De Knijf, R. Petrov, C. Föjer, and L.A.I. Kestens: Mater. Sci. Eng. A, 2014, vol. 615, pp. 107–15.10.1016/j.msea.2014.07.054 ↗
47. J. Ågren: Scr. Metall., 1986, vol. 20, pp. 1507–10.10.1016/0036-9748(86)90384-4 ↗
48. A.S. Nishikawa, M.J. Santofimia, J. Sietsma, and H. Goldenstein: Acta Mater., 2018, vol. 142, pp. 142–51.10.1016/j.actamat.2017.09.048 ↗
49. D. De Knijf, R. Petrov, C. Föjer, and L.A.I. Kestens: Mater. Sci. Eng. A, 2014, vol. 615, pp. 107–15.10.1016/j.msea.2014.07.054 ↗
50. M.J. Santofimia, L. Zhao, and J. Sietsma: Metall. Mater. Trans. A, 2008, vol. 40, pp. 46–57.10.1007/s11661-008-9701-4 ↗
51. I.B. Timokhina, H. Beladi, X.Y. Xiong, Y. Adachi, and P.D. Hodgson: Acta Mater., 2011, vol. 59, pp. 5511–22.10.1016/j.actamat.2011.05.024 ↗
52. I.B. Timokhina, E. V. Pereloma, S.P. Ringer, R.K. Zheng, and P.D. Hodgson: ISIJ Int., 2010, vol. 50, pp. 574–82.10.2355/isijinternational.50.574 ↗
53. B. Hutchinson, J. Hagström, O. Karlsson, D. Lindell, M. Tornberg, F. Lindberg, and M. Thuvander: Acta Mater., 2011, vol. 59, pp. 5845–58.10.1016/j.actamat.2011.05.061 ↗
54. H. Qu: Ph.D. Thesis, Case Western Reserve University, Cleveland, OH, 2013.
55. K. Hase, C. Garcia-Mateo, and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2004, vol. 20, pp. 1499–1505.10.1179/026708304X6130 ↗
56. H.K.D.H. Bhadeshia: Bainite in Steels, 2nd ed., Institute of Materials, London, 2001, pp. 201–24.
57. Mohamadizadeh, A. Zarei-Hanzaki, S. Heshmati-Manesh, and A. Imandoust: Mater. Sci. Eng. A, 2014, vol. 607, pp. 621–9.10.1016/j.msea.2014.04.044 ↗
58. M.J. Santofimia, L. Zhao, and J. Sietsma: Metall. Mater. Trans. A, 2008, vol. 40, pp. 46–57.10.1007/s11661-008-9701-4 ↗
59. J. Sun and H. Yu: Mater. Sci. Eng. A, 2013, vol. 586, pp. 100–7.10.1016/j.msea.2013.08.021 ↗
60. N. Maheswari, S.G. Chowdhury, K.C.H. Kumar, and S. Sankaran: Mater. Sci. Eng. A, 2014, vol. 600, pp. 12–20.10.1016/j.msea.2014.01.066 ↗
61. E.J. Seo, L. Cho, and B.C. De Cooman: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2014, vol. 45, pp. 4022–37.
62. C. Song, H. Yu, L. Li, T. Zhou, J. Lu, and X. Liu: Mater. Sci. Eng. A, 2016, vol. 670, pp. 326–34.10.1016/j.msea.2016.06.044 ↗
63. J. Dong, X. Zhou, Y. Liu, C. Li, C. Liu, and H. Li: Mater. Sci. Eng. A, 2017, vol. 690, pp. 283–93.10.1016/j.msea.2017.03.020 ↗
64. W. Li, H. Gao, H. Nakashima, S. Hata, and W. Tian: Int. J. Miner. Metall. Mater., 2016, vol. 23, pp. 906–19.10.1007/s12613-016-1306-0 ↗
65. W.T. Zhao, X.F. Huang, and W.G. Huang: Mater. Sci. Technol., 2016, vol. 32, pp. 1–8.10.1179/1743284715Y.0000000091 ↗
66. H.R. Ghazvinloo, A. Honarbakhsh-Raouf, and E. Borhani: Metallurgist, 2016, vol. 60, pp. 758–64.10.1007/s11015-016-0363-y ↗
67. M. Gouné, F. Danoix, J. Ågren, Y. Bréchet, C.R. Hutchinson, M. Militzer, G. Purdy, S. van der Zwaag, and H. Zurob: Mater. Sci. Eng. R Reports, 2015, vol. 92, pp. 1–38.10.1016/j.mser.2015.03.001 ↗
68. S. Sun and M. Pugh: Mater. Sci. Eng. A, 2000, vol. 276, pp. 167–74.10.1016/S0921-5093(99)00261-0 ↗