Hot Corrosion Behavior of Ti-48Al and Ti-48Al-2Cr Intermetallic Alloys Produced by Electric Current Activated Sintering
Source abstract
Abstract
In this study, Ti-48Al and Ti-48Al-2Cr (at. pct) intermetallic alloys were produced by electric current activated sintering (ECAS). In order to characterize the phase formation and microstructures of these alloys, scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and X-ray diffraction (XRD) analysis were used. The XRD result shows that the intermetallic alloys are composed of γ-TiAl and α2-Ti3Al phases. The microstructure is dense with a low amount of porosity. The hot corrosion behavior of intermetallic alloys was carried out in a salt mixture of 25 wt pct K2SO4 and 75 wt pct Na2SO4 at 700 °C for 180 hours. The morphology of corroded surfaces was observed by SEM-EDS and XRD. Corrosion phases were identified as TiO2 and Al2O3. Well-adhering oxide scale was detected on the corroded sample surface at the end of 180 hours, and no spallation was observed. In addition, a parabolic curve was obtained at the weight change rate vs time.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced materials and composites · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Y. Mishin and C. Herzig: Acta Mater., 2000, vol. 48, pp. 589–623.10.1016/S1359-6454(99)00400-0 ↗
2. D.J. Kim, D.Y. Seo, H. Saari, T. Sawatzky, and Y.-W. Kim: Intermetallics, 2011, vol. 19, pp. 1509–16.10.1016/j.intermet.2011.05.027 ↗
3. H. Jiang, S. Zeng, A. Zhao, X. Ding, and P. Dong: Mater. Sci. Eng. A, 2016, vol. 661, pp. 160–67.10.1016/j.msea.2016.03.005 ↗
4. X. Jiao, X. Wang, X. Kang, P. Feng, and L. Zhang: Mater. Lett., 2016, vol. 181, pp. 261–64.10.1016/j.matlet.2016.06.048 ↗
5. M. Moser, P.H. Mayrhofer, and H. Clemens: Intermetallics, 2008, vol. 16, pp. 1206–11.10.1016/j.intermet.2008.07.003 ↗
6. B. Mei and Y. Miyamato: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 843–47.10.1007/s11661-001-0101-2 ↗
7. K. Zhang, Z. Li, and W. Gao: Mater. Lett., 2002, vol. 57, pp. 834–43.10.1016/S0167-577X(02)00882-0 ↗
8. Z. Tang, F. Wang, and W. Wu: Intermetallics, 1999, vol. 7, pp. 1271–74.10.1016/S0966-9795(99)00044-8 ↗
9. X. Shulong, X. Lijuan, Y. Hongbao, and C. Yuyong: Rare Met. Mater. Eng., 2013, vol. 42, pp. 0023–27.10.1016/S1875-5372(13)60031-4 ↗
10. A. Brotzu, F. Felli, and D. Pilone: Intermetallics, 2014, vol.54, pp. 176–80.10.1016/j.intermet.2014.06.007 ↗
11. D. Pilone and F. Felli: Intermetallics, 2012, vol. 26, pp. 36–39.10.1016/j.intermet.2012.03.008 ↗
12. B.G. Kim, G.M. Kim, and C.J. Kim: Scripta Metall. Mater., 1995, vol. 33, pp. 1117–25.10.1016/0956-716X(95)00327-R ↗
13. Z. Tang, F. Wang, and W. Wu: Intermetallics, 1999, vol. 7, pp. 1271–74.10.1016/S0966-9795(99)00044-8 ↗
14. H. Jiang, J.X. Dong, M.C. Zhang, L. Zheng, and Z.H. Yao: Rare Met., 2016, pp. 1–8.
15. N. Eliaz, G. Shemesh, and R.M. Latanision: Eng. Failure Analy., 2002, vol. 9, pp. 31–43.10.1016/S1350-6307(00)00035-2 ↗
16. A. Cordier, M. Kleitz, and M.C. Steil: J. Eur. Ceram. Soc., 2012, vol. 32, pp. 1473–79.10.1016/j.jeurceramsoc.2011.12.022 ↗
17. X. Wang, S.R. Casolco, G. Xu, and J.E. Garay: Acta Mater., 2007, vol. 55, pp. 3611–22.10.1016/j.actamat.2007.02.022 ↗
18. R. Orru, R. Licheri, A.M. Locci, A. Cincotti, and G. Cao: Mater. Sci. Eng. R, 2009, vol. 63, pp. 127–287.10.1016/j.mser.2008.09.003 ↗
19. B. Salehnasab, E. Poursaeidi, S.A. Mortazavi, and G.H. Farokhian: Eng. Failure Analy., 2016, vol. 60, pp. 316–25.10.1016/j.engfailanal.2015.11.057 ↗
20. W. Wang and C. Zhou: Corr. Sci., 2013, vol. 74, pp. 345–52.10.1016/j.corsci.2013.04.057 ↗
21. M.M. Krolikowska and E. Godlewska: Corr. Sci., 2017, vol. 115, pp. 18–29.10.1016/j.corsci.2016.11.006 ↗
22. Y. Qıan, X. Li, M. Li, J. Xu, and B. Lu: Trans. Nonferrous Met. Soc. China, 2017, vol. 27, pp. 954–61.10.1016/S1003-6326(17)60111-0 ↗
23. S.Y. Park, D.Y. Seo, S.W. Kim, S.E. Kim, and J.K. Hong: Intermetallics, 2016, vol. 74, pp. 8–14.10.1016/j.intermet.2016.04.005 ↗
24. T. Gheno, M.Z. Azar, A.H. Heuer, and B. Gleeson: Corr. Sci., 2015, vol. 101, pp. 32–46.10.1016/j.corsci.2015.08.029 ↗
25. S.C. Huang and E.L. Hall: Metall. Trans. A, 1991, vol. 22A, pp. 2619–27.10.1007/BF02851355 ↗
26. D. Pilone, F. Felli, and A. Brotzu: Intermetallics, 2013, vol. 43, pp. 131–37.10.1016/j.intermet.2013.07.023 ↗
27. Z. Tang, F. Wang, and W. Wu: Oxid. Met., 1999, vol. 51(314), pp. 235–50.10.1023/A:1018818622547 ↗