Effects of Post-Weld Heat Treatment on the Microstructure and Toughness of Flash Butt Welded High-Strength Low-Alloy Steel
Source abstract
Abstract
Effect of post-weld heat treatment on the weld microstructure, texture, and its correlation to the toughness of flash butt welded joints were investigated. Upon flash butt welding, the α and γ-fiber in the parent material converted to Goss (110)[001], rotated Goss (110)[1 $$ \bar{1} $$ 0], and rotated cube (001)[1 $$ \bar{1} $$ 0], (001)[ $$ \overline{11} $$ 0] textures along the fracture plane. Formation of these detrimental texture components was a result of shear deformation and recrystallization of austenite at temperatures above Tnr resulting in a drop of toughness at the weld zone. Inter-critical and sub-critical annealing cycles proved to be less effective in reducing the Goss (110)[001], rotated Goss (110)[1 $$ \bar{1} $$ 0], and rotated cube (001)[1 $$ \bar{1} $$ 0], (001)[ $$ \overline{11} $$ 0] texture components, and therefore, toughness values remained unaffected. Post-weld heat treatment in the austenite phase field at 1000 °C for 5 seconds resulted in the formation of new grains with different orientations leading to a reduction in the texture intensities of both Goss and rotated Goss components and therefore improved weld zone toughness. Prolonged annealing time was found to be ineffective in improving the toughness due to grain growth.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. 1. N. Yin, X. Meng, F. Li, Y. Cui and Z. Zhoue, Advanced Materials Research 2014, vol. 1004-1005, pp. 1125-1128.10.4028/www.scientific.net/AMR.1004-1005.1125 ↗
2. 2. S. Bhattacharyya, M. Adhikary, M. B. Das and S. Sarkar, Engineering Failure Analysis 2008, vol. 15, pp. 547-554.10.1016/j.engfailanal.2007.04.007 ↗
3. 3. A. N. Räsänen and J. Martikainen, Science and Technology of Welding and Joining 2011, vol. 16, pp. 471-476.10.1179/1362171811Y.0000000025 ↗
4. 4. C. Xi, D. Sun, Z. Xuan, J. Wang and G. Song, Materials & Design 2016, vol. 96, pp. 506-514.10.1016/j.matdes.2016.01.129 ↗
5. 5. Z. Xu, P. Lu and Y. Shu, Engineering Failure Analysis 2016, vol. 62, pp. 199-207.10.1016/j.engfailanal.2016.02.005 ↗
6. 6. D. L. Turner, Journal of Energy Resources Technology 1986, vol. 108, pp. 347-351.10.1115/1.3231288 ↗
7. 7. Y. Ichiyama and T. Saito, Welding International 2004, vol. 18, pp. 436-443.10.1533/wint.2004.3255 ↗
8. 8. M. Suzuki and S. Endo, Welding International 1991, vol. 5, pp. 271-276.10.1080/09507119109446734 ↗
9. 9. D. Tawfik, P. J. Mutton and W. K. Chiu, Journal of Materials Processing Technology 2008, vol. 196, pp. 279-291.10.1016/j.jmatprotec.2007.05.055 ↗
10. 10. L. Lan, C. Qiu, D. Zhao, X. Gao and L. Du, Journal of Materials Science 2012, vol. 47, pp. 4732-4742.10.1007/s10853-012-6346-x ↗
11. 11. D. Zhang, H. Terasaki and Y. Komizo, Acta Materialia 2010, vol. 58, pp. 1369-1378.10.1016/j.actamat.2009.10.043 ↗
12. 12. M. D. Geib, D. K. Matlock and G. Krauss, Metallurgical Transactions A 1980, vol. 11, pp. 1683-1689.10.1007/BF02660523 ↗
13. 13. C. Çetinkaya and U. Arabaci, Materials & Design 2006, vol. 27, pp. 1187-1195.10.1016/j.matdes.2005.02.002 ↗
14. 14. R. D. K. Misra and J. P. Anderson, Materials Science and Technology 2002, vol. 18, pp. 1513-1516.10.1179/026708302225007286 ↗
15. J. J. Jonas, In Microstructure and Texture in Steels and Other Materials, ed. A. Haldar, S. Satyam and B. Debashish (Springer London: London, 2009), pp 3-17.10.1007/978-1-84882-454-6_1 ↗
16. 16. R. K. Ray and J. J. Jonas, International Materials Reviews 1990, vol. 35, pp. 1-36.10.1179/095066090790324046 ↗
17. W. Polkowski, P. Jóźwik and Z. Bojar, EBSD and X-ray diffraction study on the recrystallization of cold rolled Ni3Al based intermetallic alloy. , vol. 614, pp. 226–233 (2014).10.1016/j.jallcom.2014.06.106 ↗
18. 18. S. Mishra, C. Därmann and K. Lücke, Acta Metallurgica 1984, vol. 32, pp. 2185-2201.10.1016/0001-6160(84)90161-5 ↗
19. 19. S. Mandal, N. K. Tewary, S. K. Ghosh, D. Chakrabarti and S. Chatterjee, Materials Science and Engineering: A 2016, vol. 663, pp. 126-140.10.1016/j.msea.2016.03.127 ↗
20. 20. N. M. L. Granados and A. S. Rodriguez, Journal of Iron and Steel Research, International 2016, vol. 23, pp. 261-269.10.1016/S1006-706X(16)30043-7 ↗
21. 21. A. Chatterjee, D. Chakrabarti, A. Moitra, R. Mitra and A. K. Bhaduri, Materials Science and Engineering: A 2014, vol. 618, pp. 219-231.10.1016/j.msea.2014.09.021 ↗