Ultrahigh Ductility, High-Carbon Martensitic Steel
Source abstract
Abstract
Based on the proposed design idea of the anti-transformation-induced plasticity effect, both the additions of the Nb element and pretreatment of the normalization process as a novel quenching–partitioning–tempering (Q–P–T) were designed for Fe-0.63C-1.52Mn-1.49Si-0.62Cr-0.036Nb hot-rolled steel. This high-carbon Q–P–T martensitic steel exhibits a tensile strength of 1890 MPa and elongation of 29 pct accompanied by the excellent product of tensile and elongation of 55 GPa pct. The origin of ultrahigh ductility for high-carbon Q–P–T martensitic steel is revealed from two aspects: one is the softening of martensitic matrix due to both the depletion of carbon in the matensitic matrix during the Q–P–T process by partitioning of carbon from supersaturated martensite to retained austenite and the reduction of the dislocation density in a martensitic matrix by dislocation absorption by retained austenite effect during deformation, which significantly enhances the deformation ability of martensitic matrix; another is the high mechanical stability of considerable carbon-enriched retained austenite, which effectively reduces the formation of brittle twin-type martensite. This work verifies the correctness of the design idea of the anti-TRIP effect and makes the third-generation advanced high-strength steels extend to the field of high-carbon steels from low- and medium-carbon steels.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. A.P. Pierman, O. Bouaziz, T. Pardoen, P.J. Jacques, and L. Brassart: Acta Mater., 2014, vol. 73, pp. 298-311.10.1016/j.actamat.2014.04.015 ↗
2. C.G. Lee, S.J. Kim, T.H. Lee, and S.H. Lee: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 2004, vol. 371, pp. 16-23.10.1016/S0921-5093(03)00035-2 ↗
3. J. Speer, D.K. Matlock, B.C. De Cooman, and J.G. Schroth: Acta Mater., 2003, vol. 51, pp. 2611-22.10.1016/S1359-6454(03)00059-4 ↗
4. T.Y. Hsu and Z.Y. Xu: Materials Science Forum, Trans Tech Publ, Switzerland, 2007, pp. 2283-86.
5. J.G. Speer, D.V. Edmonds, F.C. Rizzo, and D.K. Matlock: Curr. Opin. Solid State Mater. Sci., 2004, vol. 8, pp. 219-37.10.1016/j.cossms.2004.09.003 ↗
6. . Kuziak, R. Kawalla, and S. Waengler: Archives Civil Mech. Eng., 2008, vol. 8, pp. 103-17.10.1016/S1644-9665(12)60197-6 ↗
7. D.K. Matlock and J.G. Speer: Microstructure and Texture in Steels, Springer, NY, 2009, pp. 185-205.10.1007/978-1-84882-454-6_11 ↗
8. K. Yong-lin, H. Qi-hang, Z. Xian-Meng, and C. Ming-Hui: Mater. Des., 2013, vol. 44, pp. 331-9.10.1016/j.matdes.2012.07.068 ↗
9. K. Jeong, J-E. Jin, Y.-S. Jung, S. Kang, and Y.-K. Lee: Acta Mater., 2013, vol. 61, pp. 3399-410.10.1016/j.actamat.2013.02.031 ↗
10. S. Jing and Y. Hao: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 2013, vol. 586, pp. 100-7.10.1016/j.msea.2013.08.021 ↗
11. X.D. Wang, Z.H. Guo, and Y.H. Rong: Mater. Sci. Eng.: A, 2011, vol. 529, pp. 35-40.10.1016/j.msea.2011.08.050 ↗
12. Z.H. Cai, H. Ding, R.D.K. Misra, and Z.Y. Ying: Acta Mater., 2015, vol. 84, pp. 229-36.10.1016/j.actamat.2014.10.052 ↗
13. S. Qin, Y. Liu, Q. Hao, Y. Wang, N. Chen, X. Zuo, and Y. Rong: Mater. Sci. Eng.: A, 2016, vol. 663, pp. 151-6.10.1016/j.msea.2016.03.122 ↗
14. B.X. Huang, X.D. Wang, L. Wang, and Y.H. Rong: Metall. Mater. Trans., 2008, vol. 39A, pp. 717-24.10.1007/s11661-007-9434-9 ↗
15. N. Zhong, X.D. Wang, L. Wang, and Y.H. Rong: Mater. Sci. Eng.: A, 2009, vol. 506, pp. 111-6.10.1016/j.msea.2008.11.014 ↗
16. S. Qin, Y.Liu, Q. Hao, Y. Wang, N. Chen, X. Zuo, and Y. Rong: Metall. Mater. Trans., 2015, vol. 46A, pp. 4047-55.10.1007/s11661-015-3021-2 ↗
17. J.H. Jang, I.G. Kim, and H.K.D.H. Bhadeshia: Computat. Mater. Sci., 2009, vol. 44, pp. 1319-26.10.1016/j.commatsci.2008.08.022 ↗
18. B.-Joo Lee: Calphad, 1992, vol. 16, pp. 121–49.10.1016/0364-5916(92)90002-F ↗
19. X.D. Wang, W.Z. Xu, Z.H. Guo, L. Wang, and Y.H. Rong: Mater. Sci. Eng.: A, 2010, vol. 527, pp. 3373-8.10.1016/j.msea.2010.02.026 ↗
20. W. Woo, L. Balogh, T. Ungar, H. Choo, and Z. Feng: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 2008, vol. 498, pp. 308-13.10.1016/j.msea.2008.08.007 ↗
21. W. Li, W. Xu, X. Wang, and Y. Rong: J. Alloys Compds., 2009, vol. 474, pp. 546-50.10.1016/j.jallcom.2008.06.136 ↗
22. International Organization for Standardization: International Standard ISO 2566/1-1984(E), pp. 1–28.
23. K. Sugimoto, T. Iida, J. Sakaguchi, and T. Kashima: ISIJ Int., 2000, vol. 40, pp. 902-908.10.2355/isijinternational.40.902 ↗
24. K. Sugimoto, M. Kobayashi, A. Nagasaka, and S. Hashimoto: ISIJ Int., 1995, vol. 35, pp. 1407-14.10.2355/isijinternational.35.1407 ↗
25. N.Q. Chinh, G. Horvath, Z. Horita, and T.G. Langdon: Acta Mater. 2004, vol. 52, pp. 3555-63.10.1016/j.actamat.2004.04.009 ↗
26. K. Zhang, M. Zhang, Z. Guo, N. Chen, and Y. Rong: Mater. Sci. Eng.: A, 2011, vol. 528, pp. 8486-91.10.1016/j.msea.2011.07.049 ↗
27. Y. Wang, K. Zhang, Z. Guo, N. Chen, and Y. Rong: Acta Metall. Sinica, 2012, vol. 48, pp. 641-8.10.3724/SP.J.1037.2012.00042 ↗
28. Y. Wang, K. Zhang, Z. Guo, N. Chen, and Y. Rong: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 2012, vol. 552, pp. 288-94.10.1016/j.msea.2012.05.042 ↗