Influence of Pressure and Temperature on Microstructure and Mechanical Behavior of Squeeze Cast Mg-10Gd-3Y-0.5Zr Alloy
Source abstract
Abstract
The influence of applied pressure and pouring temperature on the microstructure and mechanical properties of a squeeze cast (SC) Mg-10Gd-3Y-0.5Zr (GW103K) alloy was systematically investigated. Our results show that increasing the applied pressure leads to microstructure refinement of the GW103K alloy with accompanying enhancement of tensile yield strength (TYS), ultimate tensile strength (UTS), and elongation to failure (E f); a decrease in pouring temperature also leads to grain refinement and increases of TYS while decreasing the UTS and E f. Our results show that, for the range of parameters studied herein, an applied pressure of ~160 MPa, in combination with a pouring temperature of ~993 K (720 °C), represents optimum process parameters for squeeze casting of GW103K. Using these process parameters, the TYS, UTS, and E f of squeeze cast GW103K alloy are 151 MPa, 232 MPa, and 3.0 pct in the as-cast state, and 264 MPa, 383 MPa, and 1.5 pct, respectively, in the as-T6 heat-treated state, both of which represent significant improvements over those of the gravity cast (GC) counterpart material.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. S. Zhu, M.A. Easton, T.B. Abbott, J.F. Nie, M.S. Dargusch, N. Hort, and M.A. Gibson: Metall. Mater. Trans. A, 2015, vol. 46, pp. 3543–54.10.1007/s11661-015-2946-9 ↗
2. [2] H. Zhou, G.M. Cheng, X.L. Ma, W.Z. Xu, S.N. Mathaudhu, Q.D. Wang, Y.T. Zhu: Acta Mater., 2015, vol. 95, pp. 20-9.10.1016/j.actamat.2015.05.020 ↗
3. [3] W.F. Xu, Y. Zhang, L.M. Peng, W.J. Ding, J.F. Nie: Acta Mater., 2015, vol. 84, pp. 317-29.10.1016/j.actamat.2014.10.046 ↗
4. [4] S.M. Zhu, J.F. Nie, M.A. Gibson, M.A. Easton: Scripta Mater., 2014, vol. 77, pp. 21-4.10.1016/j.scriptamat.2014.01.007 ↗
5. [5] C. Wang, A. Chen, L. Zhang, W. Liu, G. Wu, W. Ding: Mater. Des., 2015, vol. 84, pp. 53-63.10.1016/j.matdes.2015.06.126 ↗
6. [6] F. Penghuai, P. Liming, J. Haiyan, D. Wenjiang, Z. Chunquan: China Foundry, 2014, vol. 4, pp. 277-86.
7. [7] J.P. Weiler, J.T. Wood, R.J. Klassen, E. Maire, R. Berkmortel, G. Wang: Mater. Sci. Eng. A, 2005, vol. 395, pp. 315-22.10.1016/j.msea.2004.12.042 ↗
8. [8] A.A. Luo: Journal of Magnesium and Alloys, 2013, vol. 1, pp. 2-22.10.1016/j.jma.2013.02.002 ↗
9. [9] K.V. Yang, C.H. Cáceres, M.A. Easton: Metall. Mater. Trans. A, 2014, vol. 45, pp. 4117-28.10.1007/s11661-014-2326-x ↗
10. [10] M.R. Ghomashchi, A. Vikhrov: J. Mate. Process. Technol., 2000, vol. 101, pp. 1-9.10.1016/S0924-0136(99)00291-5 ↗
11. [11] H. Hu: J. Mater. Sci., 1998, vol. 33, pp. 1579-89.10.1023/A:1017567821209 ↗
12. [12] Y. Gan, D. Zhang, W. Zhang, Y. Li: Int. J. Cast. Metals Res., 2015, vol. 28, pp. 50-8.10.1179/1743133614Y.0000000130 ↗
13. [13] N. Souissi, S. Souissi, C. Niniven, M. Amar, C. Bradai, F. Elhalouani: Metals, 2014, vol. 4, pp. 141-54.10.3390/met4020141 ↗
14. [14] B. Lin, W.W. Zhang, Z.H. Lou, D.T. Zhang, Y.Y. Li: Mater. Des., 2014, vol. 59, pp. 10-8.10.1016/j.matdes.2014.02.012 ↗
15. [15] S.B. Bin, S.M. Xing, L.M. Tian, N. Zhao, L. Li: Trans. Nonferrous Met. Soc. China, 2013, vol. 23, pp. 977-82.10.1016/S1003-6326(13)62555-8 ↗
16. [16] K.M.A. Haider, N.A. Mufti: JOM, 2014, vol. 66, pp. 1446-53.10.1007/s11837-014-0973-4 ↗
17. [17] M. Masoumi, H. Hu: Mater. Sci. Eng. A, 2011, vol. 528, pp. 3589-93.10.1016/j.msea.2011.01.032 ↗
18. X. Zhang, M. Wang, Z. Sun, H. Hu. Influence of section thickness on microstructure and mechanical properties of squeeze cast magnesium alloy AM60 Magnesium Technology. Wiley, Hoboken, 2012, p. 561–64.
19. [19] Z. Sun, H. Hu, X. Niu: J. Mate. Process. Technol., 2011, vol. 211, pp. 1432-40.10.1016/j.jmatprotec.2011.03.014 ↗
20. [20] G.M. Han, Z.Q. Han, A.A. Luo, B.C. Liu: J. Alloy. Compd., 2015, vol. 641, pp. 56-63.10.1016/j.jallcom.2015.04.042 ↗
21. [21] Z.Q. Han, H.W. Pan, Y.D. Li, A.A. Luo, A.K. Sachdev: Metall. Mater. Trans. B-Proc. Metall. Mater. Proc. Sci., 2015, vol. 46, pp. 328-36.10.1007/s11663-014-0208-7 ↗
22. [22] W.F. Mo, L. Zhang, G.H. Wu, Y. Zhang, W.C. Liu, C.L. Wang: Mater. Des., 2014, vol. 63, pp. 729-37.10.1016/j.matdes.2014.07.005 ↗
23. [23] C.S. Goh, K.S. Soh, P.H. Oon, B.W. Chua: Mater. Des., 2010, vol. 31, Supplement 1, pp. S50-S3.10.1016/j.matdes.2009.11.039 ↗
24. [24] J. Yuan, Q.D. Wang, D.D. Yin, H. Wang, C.J. Chen, B. Ye: Materials Characterization, 2013, vol. 78, pp. 37-46.10.1016/j.matchar.2013.01.012 ↗
25. [25] X. Fang, S. Lü, L. Zhao, J. Wang, L. Liu, S. Wu: Mater. Des., 2016, vol. 94, pp. 353-9.10.1016/j.matdes.2016.01.063 ↗
26. [26] A. Yu, S. Wang, N. Li, H. Hu: J. Mate. Process. Technol., 2007, vol. 191, pp. 247-50.10.1016/j.jmatprotec.2007.03.082 ↗
27. [27] S. He: Study on the microstructural evolution, properties and fracture behavior of Mg-Gd-Y-Zr (-Ca) alloys (in Chinese), Shanghai, Shanghai Jiao Tong University, 2007.
28. [28] H. Chattopadhyay: J. Mate. Process. Technol., 2007, vol. 186, pp. 174-8.10.1016/j.jmatprotec.2006.12.038 ↗
29. W.D. Callister, D.G. Rethwisch: Fundamentals of materials science and engineering: an integrated approach, Wiley: Hoboken, 2012.
30. [30] Z.Q. Han, X.R. Huang, A.A. Luo, A.K. Sachdev, B.C. Liu: Scripta Mater., 2012, vol. 66, pp. 215-8.10.1016/j.scriptamat.2011.10.041 ↗
31. W.F. Gale, T.C. Totemeier: Smithells metals reference book, Butterworth-Heinemann: Boston, 2003.
32. D.A. Porter, K.E. Easterling: Phase Transformations in Metals and Alloys, (Revised Reprint), CRC Press: Boca Raton, 1992.10.1007/978-1-4899-3051-4 ↗
33. [33] K.M. Amin, N.A. Mufti: J. Mate. Process. Technol., 2012, vol. 212, pp. 1631-9.10.1016/j.jmatprotec.2012.02.017 ↗
34. L. Nastac, N. El-Kaddah: Computational Multi-Scale Modeling of the Microstructure and Segregation of Cast Mg Alloys at Low Superheat. Magnesium Technology 2013: Wiley, 2013. p. 263-70.10.1002/9781118663004.ch44 ↗
35. A. Ohno: Solidification: the separation theory and its practical applications. Springer, Berlin, 2012.
36. [36] S. Ming, W. Guohua, W. Wei, D. Wenjiang: Mater. Sci. Eng. A, 2009, vol. 523, pp. 145-51.10.1016/j.msea.2009.06.002 ↗
37. [37] W. Richard: Deformation and fracture mechanics of engineering materials, Fourth ed, New York, John Wiley & Sons. Inc., 1976.
38. [38] S.M. He, X.Q. Zeng, L.M. Peng, X. Gao, J.F. Nie, W.J. Ding: J. Alloy. Compd., 2007, vol. 427, pp. 316-23.10.1016/j.jallcom.2006.03.015 ↗
39. [39] R. Labusch: Physica Status Solidi (b), 1970, vol. 41, pp. 659-69.10.1002/pssb.19700410221 ↗
40. [40] P. Lukáč: Physica Status Solidi (a), 1992, vol. 131, pp. 377-90.10.1002/pssa.2211310212 ↗
41. [41] L. Gao, R.S. Chen, E.H. Han: J. Alloy. Compd., 2009, vol. 481, pp. 379-84.10.1016/j.jallcom.2009.02.131 ↗
42. [42] J.E. Bailey, P.B. Hirsch: Philos. Mag., 1960, vol. 5, pp. 485-97.10.1080/14786436008238300 ↗
43. [43] C. Caceres, P. Lukáč: Philos. Mag., 2008, vol. 88, pp. 977-89.10.1080/14786430801968611 ↗
44. [44] P. Qi: Squeeze Casting, Beijing, National Defense Industry Press, 1984.
45. [45] J.F. Nie: Scripta Mater., 2003, vol. 48, pp. 1009-15.10.1016/S1359-6462(02)00497-9 ↗
46. [46] J.-F. Nie: Metall. Mater. Trans. A, 2012, vol. 43, pp. 3891-939.10.1007/s11661-012-1217-2 ↗
47. [47] L. Gao, R.S. Chen, E.H. Han: J. Mater. Sci., 2009, vol. 44, pp. 4443-54.10.1007/s10853-009-3672-8 ↗
48. [48] M. Mabuchi, K. Kubota, K. Higashi: Materials Letters, 1994, vol. 19, pp. 247-50.10.1016/0167-577X(94)90165-1 ↗
49. [49] A. Luo, M.O. Pekguleryuz: J. Mater. Sci., 1994, vol. 29, pp. 5259-71.10.1007/BF01171534 ↗
50. [50] C.R. Hutchinson, J.F. Nie, S. Gorsse: Metall. Mater. Trans. A, 2005, vol. 36, pp. 2093-105.10.1007/s11661-005-0330-x ↗