journal article·2016-02

Unraveling the Effect of Thermomechanical Treatment on the Dissolution of Delta Ferrite in Austenitic Stainless Steels

Mohammad Rezayat, Hamed Mirzadeh, Masih Namdar, Mohammad Habibi Parsa

Publisher page

Abstract

Considering the detrimental effects of delta ferrite stringers in austenitic stainless steels and the industrial considerations regarding energy consumption, investigating, and optimizing the kinetics of delta ferrite removal is of vital importance. In the current study, a model alloy prone to the formation of austenite/delta ferrite dual phase microstructure was subjected to thermomechanical treatment using the wedge rolling test aiming to dissolve delta ferrite. The effect of introducing lattice defects and occurrence of dynamic recrystallization (DRX) were investigated. It was revealed that pipe diffusion is responsible for delta ferrite removal during thermomechanical process, whereas when the DRX is dominant, the kinetics of delta ferrite dissolution tends toward that of the static homogenization treatment for delta ferrite removal that is based on the lattice diffusion of Cr and Ni in austenite. It was concluded that the optimum condition for dissolution of delta ferrite can be defined by the highest rolling temperature and strain in which DRX is not pronounced.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. M.F. McGuire, Stainless Steels for Design Engineers, ASM International, Ohio, 2008.10.31399/asm.tb.ssde.9781627082860 ↗
2. F.C. Hull: Weld. Res. Supp., 1973, 52 pp. 193–203.
3. M. Mukherjee and T.K. Pal: Acta metallurgica, 2013, vol. 26, pp. 206–216.10.1007/s40195-012-0200-7 ↗
4. P.H.S. Cardoso, C. Kwietniewski, J.P. Porto, A. Reguly, and T.R. Strohaecker: Mater. Sci. Eng. A., 2003, vol. 351, pp. 1–8.10.1016/S0921-5093(01)01740-3 ↗
5. G.K. Mandal, N. Stanford, P. Hodgson, and J.H. Beynon: Mater. Sci. Eng. A, 2012, vol. 556, pp. 685–695.10.1016/j.msea.2012.07.050 ↗
6. T. Bai and K. Guan: Mater. Desi., 2013, vol. 52, pp. 849–60.10.1016/j.matdes.2013.06.019 ↗
7. C.C. Tseng, Y. Shen, S.W. Thompson, M.C. Mataya, and G. Krauss: Met. Trans. A, vol. 25, 1994, pp. 1147–58.10.1007/BF02652290 ↗
8. N.Suutala: Met. Trans. A, 1983, vol. 14, pp. 191–97.10.1007/BF02651615 ↗
9. S. Li, Z. Eliniyaz, L. Zhang, F. Sun, Y. Shen, and A. Shan: Mater. Character., 2012, vol. 73, pp. 144–52.10.1016/j.matchar.2012.08.009 ↗
10. A.F. Padilha, C.F. Tavares and M.A. Martorano: Mater. Sci. Forum. 2013, vol. 732, pp. 733–38.
11. S.H. Kim, H.K. Moon, T. Kang, and C.S. Lee: Mater. Sci. Eng. A, 2003, vol. 356, pp. 390–98.10.1016/S0921-5093(03)00152-7 ↗
12. A.D. Manshadi, P.D. Hodgson: J Mater. Sci., 2008, vol. 43 pp. 6272–77.10.1007/s10853-008-2907-4 ↗
13. M.C. Mataya, E.R. Nilsson, E.L. Brown, and G. Krauss: Met. Trans. A, 2003, vol. 34, 1683–1703.10.1007/s11661-003-0313-8 ↗
14. S. Soleymani, O.A. Ojo, and N. Richards: J Mater. Eng. Perform., 2015, vol. 24, pp. 499–504.10.1007/s11665-014-1290-3 ↗
15. J. Edberg, L. E. Lindgren, and M. Jarl: J. Mater. Process. Tech., 1994, vol. 42 pp. 227-238.10.1016/0924-0136(94)90142-2 ↗
16. J.W. Christian, The theory of transformations in metals and alloys Part I. Equilibrium and General Kinetic Theory, 2nd ed., Pergamon Press, Oxford, 1975
17. E.A. Brandes and G.B. Brook, Smithells Metals Reference Book, Butterworth-Heinemann, Amsterdam 1992.
18. E.J. Mittemeijer, L. Cheng, P.J. Schaaf, C.M. Brakman, and B.M. Korevaar: Met.Trans. A, 1988, vol. 19, pp. 925–32.10.1007/BF02628377 ↗
19. B. Ahlblom and R. Sandstrom: Int. Met. Rev., 1982,vol.1, pp. 1–27.10.1179/imr.1982.27.1.1 ↗
20. H. Mirzadeh and A. Najafizadeh: Mater. Design, 2010, vol. 31, pp. 1174-1179.10.1016/j.matdes.2009.09.038 ↗