Comparison of Performance and Oxidation of Nitronic-50 and Stainless Steel 316 in Subcritical and Supercritical Water Environments
Source abstract
Abstract
This work investigates two austenitic stainless steels, Nitronic-50 and stainless steel 316, for use in both subcritical and supercritical water (SCW) conditions. The mechanical characteristics of the materials were investigated using slow strain rate testing in a SCW test loop under the following conditions: nitrogen at ambient temperature and pressure, liquid water at 473 K (200 °C) and 8 MPa, liquid water at 573 K (300 °C) and 15 MPa, and SCW at 698 K (425 °C) and 27 MPa. The surfaces of the failed samples were characterized using Raman spectroscopy, and X-ray photoelectron spectroscopy. Nitronic-50 was found to have superior mechanical strength characteristics at all conditions compared to stainless steel 316. At all elevated temperature conditions, stainless steel 316 was found to have a surface film consisting of iron oxides, while the surface film of Nitronic-50 predominantly consisted of nickel-iron spinel.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Subcritical and Supercritical Water Processes · Advanced Materials Characterization Techniques · Ion-surface interactions and analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (87)
Show source-provided references
1. D. Schroeder, Introduction to Thermal Physics, Heyden, Robin, United States, 2000, p. 422.
2. U.S. DOE: Issued by the U.S. DOE Nuclear Energy Research Advisory Committee and the Generation IV International Forum (2002).
3. G. Locatelli, M. Mancini, N. Todeschini, Energy Policy 61 (2013) 1503-1520.10.1016/j.enpol.2013.06.101 ↗
4. M. Sun, X. Wu, Z. Zhang, E.-H. Han, Corrosion Science 51 (2009) 1069-1072.10.1016/j.corsci.2009.03.008 ↗
5. T.R. Allen, Y. Chen, X. Ren, K. Sridharan, L. Tan, G.S. Was, E. West, and D. Guzonas: Material Performance in Supercritical Water, vol 5, Elsevier B.V., 2012, pp. 279–326.10.1016/B978-0-08-056033-5.00100-2 ↗
6. G.S. Was, P. Ampornrat, G. Gupta, S. Teysseyre, E.A. West, T.R. Allen, K. Sridharan, L. Tan, Y. Chen, X. Ren, C. Pister, Journal of Nuclear Materials 371 (2007) 176-201.10.1016/j.jnucmat.2007.05.017 ↗
7. Y. Su, K.S. Chaudri, W. Tian, G. Su, S. Qiu, Annals of Nuclear Energy 63 (2014) 541-547.10.1016/j.anucene.2013.08.023 ↗
8. J.K. Shultis, R.E. Faw, Fundamentals of Nuclear Science and Engineering, CRC Press, Boca Raton, FL, 2008 p. 591.
9. T. Schulenberg, J. Starflinger, P. Marsault, D. Bittermann, C. Maráczy, E. Laurien, J.A. Lycklama à Nijeholt, H. Anglart, M. Andreani, M. Ruzickova, A. Toivonen, Nuclear Engineering and Design 241 (2011) 3505-3513.10.1016/j.nucengdes.2010.09.039 ↗
10. Y.D. Baranaev, P.L. Kirillov, V.M. Poplavskii, V.N. Sharapov, Atomic Energy 96 (2004) 345-351.10.1023/B:ATEN.0000038101.90666.da ↗
11. L. Tan, M.T. Machut, K. Sridharan, T.R. Allen, Journal of Nuclear Materials 371 (2007) 161-170.10.1016/j.jnucmat.2007.05.001 ↗
12. Y. Chen, K. Sridharan, S. Ukai, T.R. Allen, Journal of Nuclear Materials 371 (2007) 118-128.10.1016/j.jnucmat.2007.05.018 ↗
13. G. Gupta, P. Ampornrat, X. Ren, K. Sridharan, T.R. Allen, G.S. Was, Journal of Nuclear Materials 361 (2007) 160-173.10.1016/j.jnucmat.2006.12.006 ↗
14. L. Tan, Y. Yang, T.R. Allen, Corrosion Science 48 (2006) 4234-4242.10.1016/j.corsci.2006.05.026 ↗
15. Y. Chen, K. Sridharan, T.R. Allen, S. Ukai, Journal of Nuclear Materials 359 (2006) 50-58.10.1016/j.jnucmat.2006.07.021 ↗
16. X. Ren, K. Sridharan, T.R. Allen, Journal of Nuclear Materials 358 (2006) 227-234.10.1016/j.jnucmat.2006.07.010 ↗
17. L. Tan, Y. Yang, T.R. Allen, Corrosion Science 48 (2006) 3123-3138.10.1016/j.corsci.2005.10.010 ↗
18. Y. Chen, K. Sridharan, T. Allen, Corrosion Science 48 (2006) 2843-2854.10.1016/j.corsci.2005.08.021 ↗
19. P. Ampornrat, G. Gupta, G.S. Was, Journal of Nuclear Materials 395 (2009) 30-36.10.1016/j.jnucmat.2009.09.012 ↗
20. P. Ampornrat, G.S. Was, Journal of Nuclear Materials 371 (2007) 1-17.10.1016/j.jnucmat.2007.05.023 ↗
21. F.A. Garner, M.B. Toloczko, B.H. Sencer, Journal of Nuclear Materials 276 (2000) 123-142.10.1016/S0022-3115(99)00225-1 ↗
22. L. Tan, X. Ren, K. Sridharan, T.R. Allen, Corrosion Science 50 (2008) 3056-3062.10.1016/j.corsci.2008.08.024 ↗
23. L. Tan, K. Sridharan, T.R. Allen, R.K. Nanstad, D.A. McClintock, Journal of Nuclear Materials 374 (2008) 270-280.10.1016/j.jnucmat.2007.08.015 ↗
24. X. Ren, K. Sridharan, T.R. Allen, Corrosion 63 (2007) 603-612.10.5006/1.3278410 ↗
25. R. Zhou, E.A. West, Z. Jiao, G.S. Was, Journal of Nuclear Materials 395 (2009) 11-22.10.1016/j.jnucmat.2009.09.010 ↗
26. E.A. West, G.S. Was, Journal of Nuclear Materials 392 (2009) 264-271.10.1016/j.jnucmat.2009.03.008 ↗
27. S. Teysseyre, Z. Jiao, E. West, G.S. Was, Journal of Nuclear Materials 371 (2007) 107-117.10.1016/j.jnucmat.2007.05.008 ↗
28. S. Teysseyre, G.S. Was, Corrosion 62 (2006) 1100-1116.10.5006/1.3278244 ↗
29. G.S. Was, S. Teysseyre, Z. Jiao, Corrosion 62 (2006) 989-1005.10.5006/1.3278237 ↗
30. F.A. Garner, E.P. Simonen, B.M. Oliver, L.R. Greenwood, M.L. Grossbeck, W.G. Wolfer, P.M. Scott, Journal of Nuclear Materials 356 (2006) 122-135.10.1016/j.jnucmat.2006.05.023 ↗
31. L. Tan, X. Ren, K. Sridharan, T.R. Allen, Corrosion Science 50 (2008) 2040-2046.10.1016/j.corsci.2008.04.008 ↗
32. L. Tan, K. Sridharan, T.R. Allen, Journal of Nuclear Materials 348 (2006) 263-271.10.1016/j.jnucmat.2005.09.023 ↗
33. E.A. West, G.S. Was, Journal of Nuclear Materials 441 (2013) 623-632.10.1016/j.jnucmat.2012.10.021 ↗
34. E.A. West, M.D. McMurtrey, Z. Jiao, G. Was, Metallurgical and Materials Transactions A 43 (2012) 136-146.10.1007/s11661-011-0826-5 ↗
35. E.A. West, G.S. Was, Journal of Nuclear Materials 408 (2011) 142-152.10.1016/j.jnucmat.2010.11.012 ↗
36. Q.J. Peng, S. Teysseyre, P.L. Andresen, G.S. Was, Corrosion 63 (2007) 1033-1041.10.5006/1.3278318 ↗
37. K. Sridharan, S.P. Harrington, A.K. Johnson, J.R. Licht, M.H. Anderson, T.R. Allen, Materials & Design 28 (2007) 1177-1185.10.1016/j.matdes.2006.01.019 ↗
38. A.T. Motta, A. Yilmazbayhan, M.J.G. da Silva, R.J. Comstock, G.S. Was, J.T. Busby, E. Gartner, Q. Peng, Y.H. Jeong, J.Y. Park, Journal of Nuclear Materials 371 (2007) 61-75.10.1016/j.jnucmat.2007.05.022 ↗
39. Q. Peng, E. Gartner, J.T. Busby, A.T. Motta, G.S. Was, Corrosion 63 (2007) 577-590.10.5006/1.3278408 ↗
40. J. Kaneda, S. Kasahara, J. Kuniya, K. Moriya, F. Kano, N. Saito, A. Shioiri, T. Shibayama, H. Takahashi: in Proceedings of the 12th international conference on Environmental Degradation of Materials in Nuclear Power Systems—Water Reactors (2006) pp. 1409–14.
41. L. Tan, T.R. Allen, E. Barringer, Journal of Nuclear Materials 394 (2009) 95-101.10.1016/j.jnucmat.2009.08.008 ↗
42. E. Barringer, Z. Faiztompkins, H. Feinroth, T. Allen, M. Lance, H. Meyer, L. Walker, E. Lara-Curzio, Journal of the American Ceramic Society 90 (2007) 315-318.10.1111/j.1551-2916.2006.01401.x ↗
43. V.V. Naumenko, A.P. Shlyamnev, G.A. Filippov, Metallurgist 55 (2011) 410-418.10.1007/s11015-011-9445-z ↗
44. R.f.a. Jargelius-Pettersson, Corrosion Science 41 (1999) 1639-1664.10.1016/S0010-938X(99)00013-X ↗
45. I. Olefjord, L. Wegrelius, Corrosion Science 38 (1996) 1203-1220.10.1016/0010-938X(96)00018-2 ↗
46. M.O. Speidel, Materialwissenschaft und Werkstofftechnik 37 (2006) 875-880.10.1002/mawe.200600068 ↗
47. S. Schneider, Advances in Powder Metallurgy and Particle Materials 1 (2011) 87.
48. S. Teysseyre, Q. Peng, C. Becker, G.S. Was, Journal of Nuclear Materials 371 (2007) 98-106.10.1016/j.jnucmat.2007.05.025 ↗
49. H. Je, A. Kimura, Corrosion Science 78 (2014) 193-199.10.1016/j.corsci.2013.09.016 ↗
50. W.-G. Guo, S. Nemat-Nasser, Mechanics of Materials 38 (2006) 1090-1103.10.1016/j.mechmat.2006.01.004 ↗
51. A.J. Sedriks, P.J. Dudt, Corrosion 57 (2001) 84-91.10.5006/1.3290334 ↗
52. I.L. Caplan: Mechanical Properties and Seawater Behavior of Nitronic 50 (22Cr-13Ni-5Mn) Plate, 1976.
53. S.M.R. Ziaei, J. Mostowfi, M. Golestani pour, S.A.R. Ziaei, Engineering Failure Analysis 33 (2013) 465-472.10.1016/j.engfailanal.2013.06.022 ↗
54. G.M. Ugiansky, J.H. Payer, Stress Corrosion Cracking: The Slow Strain-Rate Technique, American Society for Testing and Materials, Philadelphia, PA, 1979, p. 438.10.1520/STP665-EB ↗
55. D. Fahr, Analysis of Stress-strain Behavior of Unirradiated Type 316 Stainless Steel, Defense Technical Information Center, Oak Ridge, TN., 1972.
56. P. Rodriguez, Bulletin of Materials Science 6 (1984) 653-663.10.1007/BF02743993 ↗
57. B.K. Choudhary, Materials Science & Engineering: A 603 (2014) 160.10.1016/j.msea.2014.02.083 ↗
58. K. Peng, K. Qian, W. Chen, Materials Science and Engineering: A 379 (2004) 372-377.10.1016/j.msea.2004.03.004 ↗
59. L.J. Meng, J. Sun, H. Xing, G.W. Pang, Journal of Nuclear Materials 394 (2009) 34-38.10.1016/j.jnucmat.2009.08.002 ↗
60. C. Gupta, J.K. Chakravartty, S. Banerjee, Metallurgical and Materials Transactions A 41 (2010) 3326-3339.10.1007/s11661-010-0409-x ↗
61. J.F. Shackelford, Introduction to Materials Science for Engineers, Pearson Education, Inc., Upper Saddle River, New Jersey, 2005, p. 878.
62. B.H. Lee, I.S. Kim, Journal of Nuclear Materials 226 (1995) 216-225.10.1016/0022-3115(95)00092-5 ↗
63. B.D. Hosterman: Raman Spectroscopic Study of Solid Solution Spinel Oxides, vol Dissertation/Thesis, ProQuest, UMI Dissertations Publishing, 2011.
64. K.F. McCarty, D.R. Boehme, Journal of Solid State Chemistry 79 (1989) 19-27.10.1016/0022-4596(89)90245-4 ↗
65. D.L.A. de Faria, S.V. Silva, M.T. deOliveira, Journal of Raman Spectroscopy 28 (1997) 873-878.10.1002/(SICI)1097-4555(199711)28:11<873::AID-JRS177>3.0.CO;2-B ↗
66. O.N. Shebanova, P. Lazor, Journal of Raman Spectroscopy 34 (2003) 845-852.10.1002/jrs.1056 ↗
67. M. Hanesch, Geophysical Journal International 177 (2009) 941-948.10.1111/j.1365-246X.2009.04122.x ↗
68. D.L.A. de Faria, F.N. Lopes, Vibrational Spectroscopy 45 (2007) 117-121.10.1016/j.vibspec.2007.07.003 ↗
69. J.H. Kim, I.S. Hwang, Nuclear Engineering and Design 235 (2005) 1029-1040.10.1016/j.nucengdes.2004.12.002 ↗
70. P.R. Graves, C. Johnston, J.J. Campaniello, Materials Research Bulletin 23 (1988) 1651-1660.10.1016/0025-5408(88)90255-3 ↗
71. B. Stellwag, Corrosion Science 40 (1998) 337-370.10.1016/S0010-938X(97)00140-6 ↗
72. J. Yuan, X. Wu, W. Wang, S. Zhu, F. Wang, Oxidation of Metals 79 (2013) 541-551.10.1007/s11085-013-9380-4 ↗
73. D.A. Guzonas, W.G. Cook, Corrosion Science 65 (2012) 48-66.10.1016/j.corsci.2012.08.006 ↗
74. R. Bauch, M. Cambini, P. Weisgerber, C. DeAsmundis, C. Plog, Journal of Nuclear Materials 92 (1980) 334-344.10.1016/0022-3115(80)90119-1 ↗
75. M. da Cunha Belo, M. Walls, N.E. Hakiki, J. Corset, E. Picquenard, G. Sagon, D. Noël, Corrosion Science 40 (1998) 447-463.10.1016/S0010-938X(97)00158-3 ↗
76. Y.J. Kim, Corrosion 51 (1995) 849.10.5006/1.3293562 ↗
77. J. Robertson, Corrosion Science 32 (1991) 443-465.10.1016/0010-938X(91)90125-9 ↗
78. H. Li, W. Chen, Corrosion Science 52 (2010) 2481-2488.10.1016/j.corsci.2010.02.040 ↗
79. P.R. Wilson, Z. Chen, Corrosion Science 49 (2007) 1305-1320.10.1016/j.corsci.2006.06.013 ↗
80. H. Li, W. Chen, Corrosion Science 53 (2011) 2097-2105.10.1016/j.corsci.2011.02.021 ↗
81. Y.C. Lu, R. Bandy, C.R. Clayton, R.C. Newman, J. Electrochem. Soc 130 (1983) 1774-1776.10.1149/1.2120091 ↗
82. R.C. Newman, T. Shahrabi, Corrosion Science 27 (1987) 827-838.10.1016/0010-938X(87)90040-0 ↗
83. P.R.B.A.v. Levey: Corrosion, 1995.
84. H. Baba, Y. Katada, Corrosion Science 48 (2006) 2510-2524.10.1016/j.corsci.2005.09.010 ↗
85. H. Baba, T. Kodama, Y. Katada, Corrosion Science 44 (2002) 2393-2407.10.1016/S0010-938X(02)00040-9 ↗
86. H.J. Grabke, ISIJ International 36:1273 (1996).10.2355/isijinternational.36.777 ↗
87. L. Magagnin, Corrosion of Austenitic Stainless Steels: Mechanism, Mitigation, and Monitoring, vol 60, National Association of Corrosion Engineers, Houston, 2004, p. 424.