journal article·2012-11

Continuous Twin Screw Rheo-Extrusion of an AZ91D Magnesium Alloy

M. Xia, Y. Huang, Z. Cassinath, Z. Fan

Publisher page

Abstract

The twin screw rheo-extrusion (TSRE) is designed to take advantage of the nondendritc microstructure and thixotropic characterization of semisolid-metal slurries and produce simple metal profiles directly from melts. The extrusion equipment consists of a rotor-stator high shear slurry maker, a twin screw extruder, and a die assembly. The process is continuous and has a potential for significantly saving energy, manufacturing cost, and enhancing efficiency. The present investigation was carried out to study the process performance for processing rods of an AZ91D magnesium alloy and the microstructure evolution during processing. The semisolid slurry prepared by the process was characterized by uniformly distributed nondendritic granular primary phase particles. AZ91D rods with uniform and fine microstructures and moderate mechanical properties were produced. For the given slurry making parameters, decreasing extrusion temperature was found to improve microstructures and properties. The mechanisms of particle granulation and refinement and the effect of processing parameters on process performance and thermal management are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. D.B. Spencer, R. Mehrabian, and M.C. Flemings: Metall. Trans., 1972, vol. 3, pp. 1925–32.10.1007/BF02642580 ↗
2. Z. Fan: Int. Mater. Rev., 2002, vol. 47, pp. 49–86.10.1179/095066001225001076 ↗
3. Z. Fan: Mater. Sci. Eng. A, 2005, vols. 413–414, pp. 72–78.10.1016/j.msea.2005.09.038 ↗
4. S.-J. Liu, W.C. Keung, and Y.-L. Kang: Trans. Nonferrous Met. Soc. China, 2010, vol. 20, pp. 1805–14.10.1016/S1003-6326(09)60378-2 ↗
5. M.C. Flemings: Metall. Trans. A, 1991, vol. 22A, pp. 957–81.10.1007/BF02661090 ↗
6. R. Decker and R. Carnahan: Thixomolding, ASM Handbook, ASM, Materials Park, OH, 2008, vol. 15, pp. 777–79.10.31399/asm.hb.v15.a0005275 ↗
7. S.B. Brown and M.C. Flemings: Adv. Mater. Process., 199, vol. 143, pp. 36–40.
8. R. Song, Y. Kang, and A. Zhao: J. Mater. Process. Technol., 2008, vol. 198, pp. 291–99.10.1016/j.jmatprotec.2007.06.079 ↗
9. E. Tzimas and A. Zavaliangos: J. Mater. Sci., 2000, vol. 35, pp. 5319–29.10.1023/A:1004890711322 ↗
10. K.P. Young, C.P. Kyonka, and J.A. Courtois: U.S. Patent 4,415,374, 1983.
11. L.E. Boyed, D.H. Kirkwood, and M.M. Sellars: Proc. 2nd World Basque Conf. on New Structural Materials, A.K. Bhasin, J.J. Moore, K.P. Young, and S. Midson, eds., Servico Central de Publicaciones del Gobierno Vasco, Madrid, 1988, pp. 285–95.
12. J. Wannasin, S. Janudom, T. Rattanochaikul, and R. Canyook: Trans. Nonferrous Met. Soc. China, 2010, vol. 20, pp. s1010–s1015.10.1016/S1003-6326(10)60622-X ↗
13. R. Nagata, Y. Uetani, H. Takagi, K. Matsuda, and S. Ikeno: Mater. Sci. Forum, 2006, vols. 519–521, pp. 1847–52.10.4028/www.scientific.net/MSF.519-521.1847 ↗
14. H. Peng, S.P. Wang, N. Wang, and K.K. Wang: Proc. 3rd Int. Conf. on Semisolid Processing of Alloys and Composites, M. Kiuchi, ed., Institute of Industrial Science, Tokyo, 1994, pp. 191–200.
15. S. Ji, Z. Fan, and M.J. Bevis: Mater. Sci. Eng. A, 2001, vol. 299A, pp. 210–17.10.1016/S0921-5093(00)01373-3 ↗
16. X. Du and E. Zhang: Mater. Lett., 2007, vol. 61, pp. 2333–37.10.1016/j.matlet.2006.09.007 ↗
17. F. Czerwinski, A. Zielinska, P.J. Pinet, and J. Overbeeke: Acta Mater., 2001, vol. 49, pp. 1225–35.10.1016/S1359-6454(01)00015-5 ↗
18. F. Czerwinski: Acta Mater., 2004, vol. 52, pp. 5057–69.10.1016/j.actamat.2004.07.011 ↗
19. Z. Fan and G. Liu: Acta Mater., 2005, vol. 53, pp. 4345–57.10.1016/j.actamat.2005.05.033 ↗
20. J.G. Wang, H.Q. Lin, H.Y. Wang, and Q.C. Jiang: J. Alloys Compd., 2008, vol. 466, pp. 98–105.10.1016/j.jallcom.2007.11.030 ↗
21. Y.F. Zhang, Y.B. Liu, Z.Y. Cao, Q.Q. Zhang, and L. Zhang: J. Mater. Process. Technol., 2009, vol. 209, pp. 1375–84.10.1016/j.jmatprotec.2008.03.059 ↗
22. R. Guan, J. Wen, S. Wang, and X. Liu: Trans. Nonferrous Met. Soc. China, 2006, vol. 16, pp. 382–86.10.1016/S1003-6326(06)60065-4 ↗
23. F. Czerwinski and A. Zielinska-Lipiec: Acta Mater., 2005, vol. 53, pp. 3433–44.10.1016/j.actamat.2005.03.048 ↗
24. A. Vogel and B. Cantor: J. Cryst. Growth, 1977, vol. 37, pp. 309–16.10.1016/0022-0248(77)90125-7 ↗
25. A. Hellawell: Proc. 4th Int. Conf. on Semi-Solid Processing of Alloys and Composites, D.H. Kirkwood and P. Kapranos, eds., Sheffield, United Kingdom, 1996, pp. 60–66.
26. R.D. Doherty, H.-I. Lee, and E.A. Feest: Mater. Sci. Eng. A, 1984, vol. 65A, pp. 181–89.10.1016/0025-5416(84)90211-8 ↗
27. J.M.M. Molenaar, F.W.H.C. Salemans, and L. Katgerman: J. Mater. Sci., 1985, vol. 20, pp. 4335–42.10.1007/BF00559322 ↗
28. J.M.M. Molenaar, L. Katgerman, W.H. Kool, and R.J. Smeulders: J. Mater. Sci., 1986, vol. 21, pp. 389–97.10.1007/BF01145499 ↗
29. A.M. Mullis: Acta Mater., 1999, vol. 47, pp. 1783–82.10.1016/S1359-6454(99)00052-X ↗
30. S. Ji and Z. Fan: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 3511–20.10.1007/s11661-002-0338-4 ↗
31. A. Das, S. Ji, and Z. Fan: Acta Mater., 2002, vol. 50, pp. 4571–85.10.1016/S1359-6454(02)00305-1 ↗
32. R.S. Qin and E.R. Wallach: Mater. Sci. Eng. A, 2003, vol. 357A, pp. 45–54.10.1016/S0921-5093(03)00380-0 ↗
33. H. Men, B. Jiang, and Z. Fan: Acta Mater., 2010, vol. 58, pp. 6526–34.10.1016/j.actamat.2010.08.016 ↗
34. C.M. Gourlay, B. Meylan, and A.K. Dahle: Acta Mater., 2008, vol. 56, pp. 3403–13.10.1016/j.actamat.2008.03.020 ↗
35. S. Ji, A. Das, and Z. Fan: Scripta Mater., 2002, vol. 46, pp. 205–10.10.1016/S1359-6462(01)01221-0 ↗
36. D. Ghosh, K. Kang, C. Bach, J.G. Roemer, and C. Vanschilt: Proc. Int. Symp. on Recent Metallurgical Advances in Light Metals Industries, S. Vancouver, BC, Canada, 1995, Macewen and J.P. Gilardeau, eds., Canadian Institute of Mining, Metallurgy and Petroleum, Cop., Montreal, QC, 1995, pp. 473–79.
37. L. Yang, Y. Kang, F. Zhang, and J. Xu: Trans. Nonferrous Met. Soc. China, 2010, vol. 20, pp. s863–s867.10.1016/S1003-6326(09)60227-2 ↗
38. Y. Wang, G. Liu, and Z. Fan: Acta Mater., 2006, vol. 54, pp. 689–99.10.1016/j.actamat.2005.09.033 ↗