journal article·2012-12

In-Situ Measurements of Load Partitioning in a Metastable Austenitic Stainless Steel: Neutron and Magnetomechanical Measurements

David Maréchal, Chad W. Sinclair, Philippe Dufour, Pascal J. Jacques, Jean-Denis Mithieux

Publisher page

Abstract

In order to construct physically based models of the mechanical response of metastable austenitic steels, one must know the load partitioning between the austenite and the strain-induced martensitic phases. While diffraction-based techniques have become common for such measurements, they often require access to large facilities. In this work, we have explored a simple magnetic technique capable of providing a measure of the stresses in an embedded ferromagnetic phase. This technique makes use of the coupling between the elastic strain and the magnetic response of the α′-martensite in an austenitic stainless steel undergoing straining. The magnetic technique proposed here is compared to neutron diffraction measurements made on the same material and is shown to give nearly identical results. The resulting predictions of the load partitioning to the α′-martensite phase suggest that α′ deforms in a complex fashion, reflecting the fact that the microstructure is progressively transformed from austenite to martensite with straining. In particular, it is shown that the apparent hardening of the α′- martensite suggests elastic deformation as an important source of high macroscopic work-hardening rate in this material. © 2012 The Minerals, Metals & Materials Society and ASM International.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. V.F. Zackay, E.R. Parker, D. Fahr, and R. Busch: ASM Trans., 1967, vol. 60, pp. 252–59.
2. G.W. Powell, E.R. Marshall, and W.A. Backofen: ASM Trans., 1958, vol. 50, pp. 478–97.
3. D.T. Llewellyn: J. Mater. Sci. Technol., 1997, vol. 13, pp. 389–400.10.1179/026708397790302214 ↗
4. L. Delannay, P. Jacques, and T. Pardoen: Int. J. Sol. Struct., 2008, vol. 45, pp. 1825–43, doi:10.1016/j.ijsolstr.2007.10.026.10.1016/j.ijsolstr.2007.10.026 ↗
5. J. Bouquerel, K. Verbeken, and B.C. de Cooman: Acta Mater., 2006, vol. 54, pp. 1443–56, doi:10.1016/j.actamat.2005.10.059.10.1016/j.actamat.2005.10.059 ↗
6. M.T. Hutchings, P.J. Withers, T.M. Holden, and T. Lorentzen: Introduction to the Characterization of Residual Stress by Neutron Diffraction, Taylor & Francis Ltd., Boca Raton, FL, 2005.10.1201/9780203402818 ↗
7. K. Tao, J.J. Wall, H. Li, D.W. Brown, S.C. Vogel, and H. Choo: J. Appl. Phys., 2006, vol. 100, p. 123515.10.1063/1.2402474 ↗
8. K. Spencer, K.T. Conlon, Y. Bréchet, and J.D. Embury: J. Mater. Sci. Technol., 2009, vol. 25, pp. 18–28.10.1179/174328408X295980 ↗
9. M.R. Berrahmoune: Ph.D. Thesis, ENSAM, Metz, France, 2006.
10. J. Talonen: Ph.D. Thesis, Aalto University School of Science and Technology (TKK), Espoo, Finland, 2007.
11. P. Hedstrom, L.E. Lindgren, J. Almer, U. Lienert, J. Bernier, M. Terner, and M. Odén: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 1039–48.10.1007/s11661-009-9807-3 ↗
12. J. Talonen, P. Aspegren, and H. Hänninen: J. Mater. Sci. Technol., 2004, vol. 20, pp. 1506–12.10.1179/026708304X4367 ↗
13. M. Radu, J. Valy, A.F. Gourgues, F. Le Strat, and A. Pineau: Scripta Mater., 2005, vol. 52, pp. 525–30.10.1016/j.scriptamat.2004.10.034 ↗
14. S. Hecker, M. Stout, K. Staudhammer, and J. Smith: Metall. Trans. A, 1982, vol. 13A, pp. 619–26.10.1007/BF02644427 ↗
15. L. Zhao, N.H. van Dijk, E. Brück, J. Sietsma, and S. van der Zwaag: Mater. Sci. Eng. A, 2001, vol. 313, pp. 145–52.10.1016/S0921-5093(01)00965-0 ↗
16. J. Post, H. Nolles, K. Datta, and H.J.M. Geijselaers: Mater. Sci. Eng. A, 2008, vol. 498, pp. 179–90.10.1016/j.msea.2008.07.051 ↗
17. M. Smaga, F. Walther, and D. Eifler: Mater. Sci. Eng. A, 2008, vols. 483–484, pp. 394–97.10.1016/j.msea.2006.09.140 ↗
18. A.M. Beese: Master’s Thesis, Massachusetts Institute of Technology, Cambridge, MA, 2009.
19. A.M. Beese, D. Mohr, and P.-O. Santacreu: Eur. Symp. on Martensitic Transformations (Esomat), Prague, Czech Republic, 2009.
20. J. Kaleta and J. Zebracki: Fatigue Fract. Eng. Mater. Struct., 1996, vol. 19, pp. 1435–43.10.1111/j.1460-2695.1996.tb00179.x ↗
21. R. Bozorth: Ferromagnetism, Van Nostrand Inc., Princeton, NJ, 1951, pp. 14–19.
22. S. Chikazumi: Physics of Magnetism, John Wiley & Sons Inc., New York, NY, 1964, pp. 161–85.
23. D.C. Jiles and D.L. Atherton: J. Phys. D, 1984, vol. 17, pp. 1265–81.10.1088/0022-3727/17/6/023 ↗
24. D.C. Jiles: J. Phys. D, 1995, vol. 28, pp. 1537–47.10.1088/0022-3727/28/8/001 ↗
25. B. Westermo and L.D. Thompson: Adv. Instrum., Instrument Society of America, Houston, TX, 1992, vol. 47, pp. 1295–1303.
26. A. Pétein: Ph.D. Thesis, Université Catholique de Louvain, Louvain-la-Neuve, Belgium, 2007.
27. F. Lecroisey and A. Pineau: Metall. Trans., 1972, vol. 3, pp. 391–400.10.1007/BF02642042 ↗
28. S. Allain, J.P. Chateau, O. Bouaziz, S. Migot, and N. Guelton: Mater. Sci. Eng. A, 2004, vols. 387–389, pp. 158–62.10.1016/j.msea.2004.01.059 ↗
29. L. Rémy, A. Pineau, and B. Thomas: Mater. Sci. Eng., 1978, vol. 36, pp. 47–63.10.1016/0025-5416(78)90194-5 ↗
30. P.-O. Santacreu, J.-C. Glez, G. Chinouilh, and T. Frohlich: Steel Res. Int., 2006, vol. 77, pp. 686–91.10.1002/srin.200606448 ↗
31. Feritscope MP30E – Operator’s Manual, Fischer Technology Inc., Windsor, CT, 2006.
32. M.R. Daymond and H.G. Priesmeyer: Acta Mater., 2002, vol. 50, pp. 1613–26.10.1016/S1359-6454(02)00026-5 ↗
33. A.C. Larson and R.B. Von Dreele: Los Alamos National Laboratory Report LAUR 86-748, Los Alamos, NM, 2004.
34. P. Dufour: Master’s Thesis, Université Catholique de Louvain, Louvain-la-Neuve, Belgium, 2007.
35. J.D. Eshelby: Proc. R. Soc. A, 1957, vol. 241, p. 376.10.1098/rspa.1957.0133 ↗
36. M.R. Daymond, C. Hartig, and H. Mecking: Acta Mater., 2005, vol. 53, pp. 2805–13.10.1016/j.actamat.2005.02.041 ↗
37. W.F. Brown: Phys. Rev., 1941, vol. 60, pp. 139–47.10.1103/PhysRev.60.139 ↗
38. H.F.G. de Abreu, M.J.G. da Silva, L. Flávio, G. Herculano, and H.K.D.H. Bhadeshia: Mater. Res., 2009, vol. 12, pp. 291–97.10.1590/S1516-14392009000300008 ↗
39. H. Mecking and U.F. Kocks: Acta Metall., 1981, vol. 29, pp. 1865–75.10.1016/0001-6160(81)90112-7 ↗
40. U.F. Kocks and H. Mecking: Progr. Mater. Sci., 2003, vol. 48, pp. 171–273.10.1016/S0079-6425(02)00003-8 ↗
41. K. Spencer, J.D. Embury, K.T. Conlon, M. Véron, and Y. Bréchet: Mater. Sci. Eng. A, 2004, vols. 387–389, pp. 873–81.10.1016/j.msea.2003.11.084 ↗
42. L. Mazzoni-Leduc, T. Pardoen, and T.J. Massart: Int. J. Sol. Struct., 2008, vol. 45, pp. 5397–5418.10.1016/j.ijsolstr.2008.05.025 ↗
43. E.W. Lee: Rep. Progr. Phys., 1955, vol. 18, pp. 184–230.10.1088/0034-4885/18/1/305 ↗