Microstructural Aspects of Grain Boundary Bulge in a Dynamically Recrystallized Mg-Al-Zn Alloy
Source abstract
Abstract
Microstructural features of grain boundary bulging have been studied in a dynamically recrystallized (DRXed) Mg-Al-Zn alloy. Unidirectional compression was used to deform the specimens to different strains at 473 K (200 °C). Microstructural characterization of the deformed specimens was performed by using both scanning electron microscopy and transmission electron microscopy (TEM). From the present results, it is suggested that in AZ31 Mg alloy, the DRXed grain is developed from grain boundary bulging. After a grain boundary segment starts to bulge, a bridging dislocation wall forms and anchors the bulged grain boundary. During further deformation, the misorientation of this bridging wall gradually increases, then transforms into a grain boundary, and a DRXed grain forms. Electron backscattered diffraction was used to study the orientation relationship between bulges/DRXed grains and the parent grains, and no special orientation relationship was found between them.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Microstructure and mechanical properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. S.E. Ion, F.J. Humphreys, and S.H. White: Acta Metall., 1982, vol. 30, pp. 1909–19.10.1016/0001-6160(82)90031-1 ↗
2. R.O. Kaibyshev and O.S. Sitdikov: Phys. Met. Metall., 1994, vol. 78, pp. 420–27.
3. A. Mwembela, E.B. Konopleva, and H.J. McQueen: Scripta Mater., 1997, vol. 37, pp. 1789–95.10.1016/S1359-6462(97)00344-8 ↗
4. A. Galiyev, R. Kaibyshev, and G. Gottstein: Acta Mater., 2001, vol. 49, pp. 1199–1207.10.1016/S1359-6454(01)00020-9 ↗
5. A.G. Beer and M.R. Barnett: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1856–67.10.1007/s11661-007-9207-5 ↗
6. J.A. del Valle and O.A. Ruano: Mater. Sci. Eng. A, 2008, vol. A487, pp. 473–80.10.1016/j.msea.2007.11.024 ↗
7. T. Al-Samman and G. Gottstein: Mater. Sci. Eng. A, 2008, vol. A490, pp. 411–20.10.1016/j.msea.2008.02.004 ↗
8. R. Cottam, J. Robson, G. Lorimer, and B. Davis: Mater. Sci. Eng. A, 2008, vol. A485, pp. 375–82.10.1016/j.msea.2007.08.016 ↗
9. M.R. Drury, F.J. Humphreys, and S.H. White: Phys. Earth Plan. Int., 1985, vol. 40, pp. 208–22.10.1016/0031-9201(85)90131-1 ↗
10. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Pergamon Press, Oxford, United Kingdom, 1996, p. 369.
11. S.X. Ding, C.P. Chang, and P.W. Kao: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 415–25.10.1007/s11661-008-9747-3 ↗
12. P.A. Beck and P.R. Sperry: J. Appl. Phys., 1950, vol. 21, pp. 150–52.10.1063/1.1699614 ↗
13. J.E. Bailey: Phil. Mag., 1960, vol. 5, pp. 833–42.10.1080/14786436008241221 ↗
14. J.E. Bailey and P.B. Hirsch: Proc. R. Soc., 1962, vol. A267, pp. 11–30.
15. M.J. Luton and C.M. Sellars: Acta Metall., 1969, vol. 17, pp. 1033–43.10.1016/0001-6160(69)90049-2 ↗
16. B. Derby and M.F. Ashby: Scripta Metall., 1987, vol. 21, pp. 879–84.10.1016/0036-9748(87)90341-3 ↗
17. W. Roberts and B. Ahlblom: Acta Metall., 1978, vol. 26, pp. 801–13.10.1016/0001-6160(78)90030-5 ↗
18. S.P. Bellier and R.D. Doherty: Acta Metall., 1977, vol. 25, pp. 521–38.10.1016/0001-6160(77)90192-4 ↗
19. R.D. Doherty and R.W. Cahn: J. Less-Common Met., 1972, vol. 28, pp. 279–96.10.1016/0022-5088(72)90131-2 ↗
20. P.J. Hurley and F.J. Humphreys: Acta Mater., 2003, vol. 51, pp. 3779–93.10.1016/S1359-6454(03)00192-7 ↗
21. M. Frommert and G. Gottstein: Mater. Sci. Eng. A, 2009, vol. A506, pp. 101–10.10.1016/j.msea.2008.11.035 ↗
22. A. Belyakov, H. Miura, and T. Sakai: Mater. Sci. Eng. A, 1998, vol. A255, pp. 139–47.10.1016/S0921-5093(98)00784-9 ↗
23. T. Ito, T. Taketani, and Y. Nakayama: Scripta Metall., 1986, vol. 20, pp. 1329–32.10.1016/0036-9748(86)90089-X ↗
24. H. Miura, T. Sakai, R. Mogawa, and G. Gottstein: Scripta Mater., 2004, vol. 51, pp. 671–75.10.1016/j.scriptamat.2004.06.015 ↗
25. H. Miura, M. Ozama, R. Mogawa, and T. Sakai: Scripta Mater., 2003, vol. 48, pp. 1501–05.10.1016/S1359-6462(03)00053-8 ↗
26. H. Miura, T. Sakai, R. Mogawa, and J.J. Jonas: Phil. Mag., 2007, vol. 87, pp. 4197–4209.10.1080/14786430701532780 ↗
27. H. Miura, T. Sakai, H. Hamaji, and J.J. Jonas: Scripta Mater., 2004, vol. 50, pp. 65–69.10.1016/j.scriptamat.2003.09.035 ↗
28. D. Ponge and G. Gottstein: Acta Mater., 1998, vol. 46, pp. 69–80.10.1016/S1359-6454(97)00233-4 ↗
29. B. Bay, N. Hansen, D.A. Hughes, and D. Kuhlmann-Wilsdorf: Acta Metall. Mater., 1992, vol. 40, pp. 205–19.10.1016/0956-7151(92)90296-Q ↗
30. A. Galiyev, R. Kaibyshev, and G. Gottstein: Acta Mater., 2001, vol. 49, pp. 1199–1207.10.1016/S1359-6454(01)00020-9 ↗
31. D.M. Kirch, B. Zhao, D.A. Molodov, and G. Gottstein: Scripta Mater., 2007, vol. 56, pp. 939–42.10.1016/j.scriptamat.2007.02.010 ↗
32. E. Rabkin: J. Mater. Sci., 2005, vol. 40, pp. 875–79.10.1007/s10853-005-6504-5 ↗
33. V.G. Sursaeva, B.B. Straumal, A.S. Gornakova, L.S. Shvindlerman, and G. Gottstein: Acta Mater., 2008, vol. 56, pp. 2728–34.10.1016/j.actamat.2008.02.014 ↗
34. Z.X. Wu, Y.W. Zhang, and D.J. Srolovitz: Acta Mater., 2009, vol. 57, pp. 4278–87.10.1016/j.actamat.2009.05.026 ↗