Wettability of Cu-Ti Alloys on Graphite in Different Placement States of Copper and Titanium at 1373 K (1100 °C)
Source abstract
Abstract
The wetting behavior of the Cu-Ti alloys with titanium content of 4, 6, and 10 mass pct on the graphite substrate was investigated at 1373 K (1100 °C), using the sessile drop method in three kinds of placement states, which were from top to bottom settled as pre-alloyed Cu-Ti/C, Ti/Cu/C, and Cu/Ti/C, respectively. The results showed that a TiC layer was formed at the interface between Cu-Ti alloy and graphite substrate in all cases. The wettability improved with increasing titanium content from 4 to 10 mass pct. And with the same Ti content, the best wettability was obtained in the placement state of Cu/Ti/C, followed by Ti/Cu/C and pre-alloyed Cu-Ti/C. The different wetting behaviors of three kinds of placement states can be attributed to the contact area between the generated Cu-Ti liquid phase and the graphite substrate during the heating process, as well as the actual content of molten Ti in the generated Cu-Ti liquid phase.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. S.P. Murarka: Mater. Sci. Technol., 2001, vol. 17, pp. 749-758.10.1179/026708301101510564 ↗
2. Y. Jang, S. Kim, S. Lee, D. Kim and M. Um: Compos. Sci. Technol., 2005, vol. 65, pp. 781-784.
3. W.J. Mao, H. Sannomiya, N. Shinozaki and T. Ogawa: Adv. Mater. Res., 2014, vol. 941, pp. 102-107.10.4028/www.scientific.net/AMR.941-944.102 ↗
4. Y. Zhan and G. Zhang: Tribol. Lett., 2004, vol. 17, pp. 91-98.10.1023/B:TRIL.0000017423.70725.1c ↗
5. T. Ishii, M. Koishi and T. Tsunoda: Wettability Technology Hand book, 2nd ed., Techno-System Co., Tokyo, 2001, pp. 138.
6. D.A. Mortimer and M. Nicholas: J. Mater. Sci., 1970, vol. 5, pp. 149-155.10.1007/BF00554633 ↗
7. P.M. Scott, M. Nicholas and B. Dewar: J. Mater. Sci., 1975, vol. 10, pp. 1833-1840.10.1007/BF00754470 ↗
8. Y.V. Naidich and G.A. Kolesnichenko: Powder Metall. Met. Ceram., 1965, vol. 3, pp. 191-195.10.1007/BF00773947 ↗
9. D.A. Mortimer and M. Nicholas: J. Mater. Sci., 1973, vol. 8, pp. 640-648.10.1007/BF00561219 ↗
10. P.K. Wong, C.T. Kwok, H.C. Man and F.T. Cheng: Corros. Sci., 2012, vol. 57, pp. 228-240.10.1016/j.corsci.2011.12.013 ↗
11. L.L. Yang, P. Shen, Q. Lin, F. Qiu and Q. Jiang: Mater. Chem. Phys., 2010, vol. 124, pp. 499-503.10.1016/j.matchemphys.2010.07.001 ↗
12. K. Landry, S. Kalogeropoulou and N. Eustathopoulos: Mater. Sci. Eng., 1998, vol. A254, pp. 99-111.10.1016/S0921-5093(98)00759-X ↗
13. N. Shinozaki, K. Mukai, T. Noboritate, and H. Kaku: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 183–85.10.1007/s11661-003-0219-5 ↗
14. J.G. Li: J. Mater. Sci. Lett., 1992, vol. 11, pp. 1551-1554.10.1007/BF00740830 ↗
15. A. Contreras, E. Bedolla and R. Perez: Acta Mater., 2004, vol. 52, pp. 985-994.10.1016/j.actamat.2003.10.034 ↗
16. N. Shinozaki, Y. Katayama, Y. Umezawa and K. Wasai: J. JRICu., 2008, vol. 47, pp. 187-191.
17. I. Dahan, U. Admon, N. Frage. J. Sariel, and M.P. Dariel: Thin Solid Films, 2000, vol. 377, pp. 687–93.10.1016/S0040-6090(00)01282-7 ↗
18. J.L. Murray: Bull. Alloy Phase Diagrams., 1983, vol. 4, pp. 81-95.10.1007/BF02880329 ↗
19. Y. Iijima, K. Hoshino and K. I. Hirano: Metall. Mater. Trans., 1977, vol. 8A, pp. 997-1001.10.1007/BF02661585 ↗
20. X.C. Li, J. Stampfl and F.B. Prinz: Mater. Sci. Eng., 2000, vol. A282: pp. 86-90.10.1016/S0921-5093(99)00781-9 ↗
21. C. Wang, S. Li, T. Zhang and Y. Pan: Mater. Sci. Eng., 2011, vol. B176, pp. 53-59.10.1016/j.mseb.2010.09.001 ↗