journal article·2002-06

Fracture toughness of alloy 690 and EN52 welds in air and water

C. M. Brown, W. J. Mills

Publisher page

Abstract

The effect of low- and high-temperature water with high hydrogen on the fracture toughness of alloy 690 and its weld, EN52, was characterized using elastic-plastic JIC methodology. While both materials display excellent fracture resistance in air and elevated-temperature (>93 °C) water, a dramatic degradation in toughness is observed in 54 °C water. The loss of toughness is associated with a hydrogen-induced intergranular cracking mechanism, where hydrogen is picked up from the water. Comparison of the cracking behavior in low-temperature water with that for hydrogen-precharged specimens tested in air indicates that the critical local hydrogen content required to cause low-temperature embrittlement is on the order of 120 to 160 ppm. Loading-rate studies show that cracking resistance is improved at rates above ∼ 1000 MPa √m/h, because there is insufficient time to produce grain-boundary embrittlement. Electron fractographic examinations were performed to correlate cracking behavior with microstructural features and operative fracture mechanisms.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Fatigue and fracture mechanics · Material Properties and Failure Mechanisms

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. C.M. Brown and W.J. Mills: Corrosion, 1999, vol. 55, pp. 173–86.10.5006/1.3283978 ↗
2. K. Norring, J. Engstrom, and P. Norberg: Proc. 3rd Int. Symp. on Environmental Degradation of Materials in Nuclear Power Systems—Water Reactors, TMS, Warrendale, PA, 1988, pp. 587–93.
3. R.G. Aspden, T.F. Grand, and D.L. Harrod: “Corrosion Performance of Alloy 690,” Proc.: 1989 EPRI Alloy 690 Workshop, EPRI Report No. NP-6750-SD, EPRI, Palo Alto, CA, Apr. 1990.
4. R.A. Page: Corrosion, 1983, vol. 39, pp. 409–21.10.5006/1.3593883 ↗
5. T. Yonezawa, K. Onimura, N. Sasaguri, T. Kusakabe, H. Nagano, K. Yamanaka, T. Minami, and M. Inoue: Proc. 2nd Int. Symp. on Environmental Degradation of Materials in Nuclear Power Systems—Water Reactors, ANS, La Grange Park, IL, 1986, pp. 593–600.
6. P. Saint Paul and G. Slama: Proc. 5th Int. Symp. on Environmental Degradation of Materials in Nuclear Power Systems—Water Reactors, ANS, La Grange Park, IL, 1992, pp. 39–49.
7. A.S. O’Neill and J.F. Hall: “Literature Survey of Cracking of Alloy 600 Penetrations in PWR’s,” EPRI Report No. NP-7094, EPRI, Palo Alto, CA, Dec. 1990.
8. C.M. Brown and W.J. Mills: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1161–1174.
9. W.J. Mills: J. Testing Evaluation, 1981, vol. 9, pp. 56–62.10.1520/JTE10648J ↗
10. P.C. Paris, H. Tada, A. Zahoor, and H. Ernst: Elastic-Plastic Fracture, ASTM STP 668, ASTM, Philadelphia, PA, 1979, pp. 5–36.10.1520/STP35825S ↗
11. J.A. Begley and J.D. Landes: Fracture Toughness, Proc. 1971 Nat. Symp. on Fracture Mechanics, Part II, ASTM STP 514, ASTM, Philadelphia, PA, 1972, pp. 1–20.
12. W.C. Porr and W.J. Mills: “Application of the Normalization Data Analysis Technique for Single Specimen R-Curve Determination,” Report No. B-T-3269, Bettis Atomic Power Laboratory, West Mifflin, PA, Feb. 1999.
13. R.M.N. Pelloux: Eng. Fract. Mech., 1970, vol. 1, pp. 697–704.10.1016/0013-7944(70)90008-1 ↗
14. C.W. Hunter, R.L. Fish, and J.J. Holmes: Trans. Am. Nucl. Soc., 1972, vol. 15, pp. 254–55.
15. W.J. Mills: Metall. Trans. A, 1980, vol. 11A, pp. 1039–47.10.1007/BF02654718 ↗
16. E.A. Steigerwald, F.W. Schaller, and A.R. Troiano: Trans. AIME, 1960, vol. 218, pp. 832–41.
17. W.W. Gerberich and Y.T. Chen: Metall. Trans. A, 1975, vol. 6A, pp. 271–78.10.1007/BF02667281 ↗
18. B.B. Baranowski, S. Majchrzak, and T.B. Flanagan: J. Phys. F: Met. Phys., 1971, vol. 1, pp. 258–61.10.1088/0305-4608/1/3/307 ↗
19. M.L. Wayman and G.C. Smith: J. Phys. Chem. Solids, 1971, vol. 32, p. 103.10.1016/S0022-3697(71)80012-4 ↗
20. J.R. Rice and M.A. Johnson: Inelastic Behavior of Solids, McGraw-Hill, New York, NY, 1970, pp. 641–72.
21. R.M. McMeeking: J. Mech. Phys. Solids, 1977, vol. 25, pp. 357–81.10.1016/0022-5096(77)90003-5 ↗