Phase Transformation and Shape Memory Effect of Ti(Pt, Ir)
Source abstract
Abstract
The martensitic transformation and shape memory effect of Ti50(Pt, Ir)50 with 5–37.5 at. pct Ir were investigated using differential thermal analysis (DTA), high-temperature X-ray diffraction (HT-XRD), and compression tests. The austenite finish temperature, A f, increased with increasing Ir content from 1331 K (1058 °C) in Ti-50 at. pct Pt to 1491 K (1218 °C) in Ti-12.5Pt-37.5Ir. The structure of the parent and martensite phases was identified as B2 and B19 in all tested alloys. A large strain recovery rate was obtained in Ti50(Pt, Ir)50 with 10 to 30 at. pct Ir. The highest shape recovery ratio was 57 pct in Ti-25Pt-25Ir after deformation at 1123 K (850 °C), followed by heating to above A f. Using HT-XRD, the dependence of lattice parameter change on Ir content and temperature was investigated. The volume change during phase transformation from B2 to B19 was estimated using the lattice parameter of the B2 and B19 phases. Strain recovery is discussed along with volume change and lattice parameter change.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Titanium Alloys Microstructure and Properties · High-pressure geophysics and materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. J. Ma, S. Karaman, and R.D. Noebe: Inter. Mater. Rev., 2010, vol. 55, pp. 257-315.10.1179/095066010X12646898728363 ↗
2. D. Angst, T. Thoma, and M. Kao: J. Phys. IV., 1995, vol. 5, pp. 747-52.
3. S. Hsieh and S. Wu: Mater. Charat., 1998, vol. 41, pp. 151-62.10.1016/S1044-5803(98)00032-1 ↗
4. Y. Wang, Y. Zheng, W. Cai, and L. Zhao: Scripta Mater., 1999, vol. 40, pp. 1327-31.10.1016/S1359-6462(99)00085-8 ↗
5. X.L. Meng, W. Cai, R.D. Fu, Q.F. Li, J.X. Zhang, and L.C. Zhao: Intermetallics, 2008, vol. 16, pp. 698-705.10.1016/j.intermet.2008.02.005 ↗
6. K. Otsuka, K. Oda, Y. Ueno, M. Piao, T. Ueki, and H. Horikawa: Scripta Metall. Mater., 1993, vol. 29, pp. 1355-58.10.1016/0956-716X(93)90138-I ↗
7. T. Biggs, M.J. Witcomb, and L.A. Cornish: Mater. Sci. Eng. A, 1999, vols. 273–275A, pp. 204–07.10.1016/S0921-5093(99)00371-8 ↗
8. T. Biggs, M.B. Cortie, M.J. Witcomb, and L.A. Cornish: Metall. Mater. Trans. A., 2001, vol. 32A, pp. 1881-86.10.1007/s11661-001-0001-5 ↗
9. H.C. Donkersloot and J.H.N. Van Vucht: J. Less-Common Metals., 1970, vol. 20, pp. 83–91.10.1016/0022-5088(70)90092-5 ↗
10. H. Okamoto: Phase Diagrams for Binary Alloys, H. Okamoto, ed., ASM International, Materials Park, OH, 2000, pp. 661–81.
11. V.N. Khachin, N.A. Matveeva, V.P. Sivokha, and D.V. Chernov: Doklad. Nauk SSSR., 1981, vol. 257, pp. 167-69.
12. S. Shimizu, Y. Xu, E. Okunishi, S. Tanaka, K. Otsuka, and K. Mitose: Mater. Letts., 1998, vol. 34, pp. 23-29.10.1016/S0167-577X(97)00134-1 ↗
13. Y. Xu, S. Shimizu, Y. Suzuki, K. Otusuka, T. Ueki, and K. Kitose: Acta Mater., 1997, vol. 45, pp. 1503-11.10.1016/S1359-6454(96)00267-4 ↗
14. D. Golberg, Y. Xu, Y. Murakami, S. Morito, and K. Otsuka: Scripta Mater., 1994, vol. 30, pp. 1349-54.10.1016/0956-716X(94)90271-2 ↗
15. H. Hosoda, M. Tsuji, Y. Takahashi, T. Inamura, K. Wakashima, Y. Yamabe-Mitarai, S. Miyazaki, and K. Inoue: Thermec’2003, Pts 1-5., 2003, vols. 426–424, pp. 2333–38.10.4028/www.scientific.net/MSF.426-432.2333 ↗
16. Y. Takahashi, T. Inamura, J. Sakurai, H. Hosoda, K. Wakashima, and S. Miyazaki: Trans. MRS-J., 2004, vol. 29, pp. 3005-08.
17. G.S. Bigelow, R.D. Noebe, S.A. Padula, and A. Garg: Proc. SPIE., 2007, vol. 6526, pp. 65262B.10.1117/12.715252 ↗
18. G.S. Bigelow, S.A. Padula, A. Garg, D. Gaydosh, and R.D. Noebe: Metall. Mater. Trans. A., 2010, vol. 41A, pp. 3065-79.10.1007/s11661-010-0365-5 ↗
19. P. Kumar and D.C. Lagoudas: Acta Mater., 2010, vol. 58, pp. 1618-28.10.1016/j.actamat.2009.11.006 ↗
20. R.D. Noebe, D. Gaydosh, S.A. Padula, A. Garg, T. Biles, and M. Nathal: Proc. SPIE., 2005, vol. 5761, pp. 364-75.10.1117/12.598492 ↗
21. Y. Yamabe-Mitarai, T. Hara, and H. Hosoda: Thermec’2003, Pts 1-5, 2003, vols. 426–424, pp. 2267–72.10.4028/www.scientific.net/MSF.426-432.2267 ↗
22. Y. Yamabe-Mitarai, T. Hara, S. Miura, and H. Hosoda: J. Japan Inst. Metals. 2005, vol. 69, pp. 634-42.10.2320/jinstmet.69.634 ↗
23. Y. Yamabe-Mitarai, T. Hara, S. Miura, and H. Hosoda: Mater. Trans., 2006, vol. 47, pp. 650-57.10.2320/matertrans.47.650 ↗
24. Y. Yamabe-Mitarai, T. Hara, S. Miura, and H. Hosoda: Intermetallics, 2010, vol. 18, pp. 2275-80.10.1016/j.intermet.2010.07.011 ↗
25. X. Ren and K. Otsuka: Scripta Mater., 1998, vol. 38, pp. 1669-75.10.1016/S1359-6462(98)00078-5 ↗
26. S. Miyazaki, K. Otsuka, and C.M. Wayman: Acta Mater., 1989, vol. 37, pp. 1873-84.10.1016/0001-6160(89)90072-2 ↗
27. B. Chen and H.F. Franzen: J. Less-Common Metal., 1990, vol. 58, pp. L11-6.
28. T. Hara, Y. Yamabe-Mitarai, and K. Nishida: Proc. Int’l. Conf. on Martensitic Transformation, 2009, pp. 659–62.
29. T. Hara, Y. Yamabe-Mitarai, M. Nishida, and E. Okunishi: SMST Extended Abstracts 2010, 2010, pp. 54–55.
30. X. Ren, N. Miura, K. Taniwaki, K. Otsuka, T. Suzuki, K. Tanaka, T.I. Chumlyakov, and M. Asai: Mater. Sci. Eng. A., 1999, vols. 273–275, pp. 190–04.10.1016/S0921-5093(99)00368-8 ↗