Small Punch Creep Studies for Optimization of Nitrogen Content in 316LN SS for Enhanced Creep Resistance
Source abstract
Abstract
Small punch creep (SPC) studies have been carried out to evaluate the creep properties of 316LN stainless steel (SS) at 923 K (650 °C) at various stress levels. The results have been compared with uniaxial creep rupture data obtained from conventional creep tests. The minimum deflection rate was found to obey Norton power law. SPC rupture life was correlated with uniaxial creep rupture life. The influence of nitrogen content on the creep rupture properties of 316LN SS was investigated in the range of 0.07 to 0.14 wt pct. SPC rupture life increased and the minimum deflection rate decreased with the increase in nitrogen content. The trends were found to be in agreement with the results obtained from uniaxial creep rupture tests. These studies have established that SPC is a fast and reliable technique to screen creep properties of different experimental heats of materials for optimizing the chemical composition for developing creep-resistant materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. I. Nonaka: in Proceedings of Second Conference on Small Sample Test Techniques-Determination of Mechanical Properties of Materials by Small Punch and Other Miniature Testing Techniques, K. Matocha, R. Hurst, and W. Sun, eds., Ostrava, 2012, pp. 19–25.
2. B. Dogan and T. Hyde: in Proceedings of Second Conference on Small Sample Test Techniques-Determination of Mechanical Properties of Materials by Small Punch and Other Miniature Testing Techniques, K. Matocha, R. Hurst, and W. Sun, eds., Ostrava, 2012, pp. 26–37.
3. Y. Li, M. Sun, and C. Zhang: in Proceedings of Second Conference on Small Sample Test Techniques-Determination of Mechanical Properties of Materials by Small Punch and Other Miniature Testing Techniques, K. Matocha, R. Hurst, and W. Sun, eds., Ostrava, 2012, pp. 47–63.
4. T.H. Hyde, F. Cortellino, J.P. Rouse, and W. Sun: in Proceedings of Second Conference on Small Sample Test Techniques-Determination of Mechanical Properties of Materials by Small Punch and Other Miniature Testing Techniques, K. Matocha, R. Hurst, and W. Sun, eds., Ostrava, 2012, pp. 64–74.
5. Y. Zheng, J. Zhou, X. Ling, Z. Yang, S. Yang, Y, and Wang: in Proceedings of Second Conference on Small Sample Test Techniques-Determination of Mechanical Properties of Materials by Small Punch and Other Miniature Testing Techniques, K. Matocha, R. Hurst, and W. Sun, eds., Ostrava, 2012, pp. 127–31.
6. K. Milicka and F. Dobes: Int. J. Press. Vessel Piping, 2006, vol. 83, pp. 625–34.10.1016/j.ijpvp.2006.07.009 ↗
7. M.L. Saucedo-Munoz, S. Komazaki, T. Takahashi, T. Hashida, and T. Shoji: J. Mater. Res., 2002, vol. 17, pp. 1945–53.10.1557/JMR.2002.0288 ↗
8. S. Komazaki, T. Sugimoto, Y. Hasegawa, and Y. Kohno: ISIJ Int., 2007, vol. 47, pp. 1228–33.10.2355/isijinternational.47.1228 ↗
9. S. Komazaki, T. Kato, Y. Kohno, and H. Tanigawa: Mater. Sci. Eng. A., 2009, vol. 510–511, pp. 229–33.10.1016/j.msea.2008.04.132 ↗
10. J.D. Parker and J.D. James: International Conference on Developments in Progressing Technology, American Society for Mechanical Engineers, 1994, vol. 279, pp. 167–72.
11. B. Ule, T. Šuštar, F. Dobeš, K. Milička, V. Bicego, S. Tettamanti, K. Maile, C. Schwarzkopf, M.P. Whelan, R.H. Kozlowski, and J. Klaput: Nucl. Eng. Des., 1999, vol. 192, pp. 1–11.10.1016/S0029-5493(99)00039-4 ↗
12. Small Punch Test Method of Metallic Materials, CEN Workshop Agreement, CWA. 15627: 2006E, CEN, Brussels, Belgium, 2006.
13. R. Hurst and K. Matocha: Proceeding of Second Conference on Small Sample Test Techniques-Determination of Mechanical Properties of Materials by Small Punch and Other Miniature Testing Techniques, Ostrava, 2012, pp. 4–18.
14. D.T. Blagoeva and R.C. Hurst: Mater. Sci. Eng. A., 2009, vol. 510–511, pp. 219–23.10.1016/j.msea.2008.05.058 ↗
15. Small Punch Test Method for Metallic Materials Part 1: A Code of Practice for Small Punch Testing at Elevated Temperatures, Report No. CEN/WS 21, 2005.
16. V. Bicego, Di Persio, F. Rantala, and R. Hurst: EPERC Technical Report No. 2, European Pressure Equipment Research Council, Berlin, Germany, 2003.
17. S. Komazaki, T. Hashida, T. Shoji, and K. Suzuki: J. Test. Eval., 2000, vol. 28, pp. 249–56.10.1520/JTE12102J ↗
18. F. Dobes and K. Milicka: Mater. Sci. Eng. A, 2002, vol. 336, pp. 245–48.10.1016/S0921-5093(01)01975-X ↗
19. R. Hurst, V. Bicego, and J. Foulds: in Proceedings of Eighth International Conference on Creep and Fatigue at Elevated Temperatures, Texas, 2007.
20. M.D. Mathew, K. Laha, and V. Ganesan: Mater. Sci. Eng. A, 2012, vol. 535, pp. 76–83.10.1016/j.msea.2011.12.044 ↗
21. M.D. Mathew and V.S. Srinivasan: in Monograph on High Nitrogen Austenitic Steels and Stainless Steels, U. Kamachi Mudali and Baldev Raj, eds., Narosa Publications, New Delhi, 2004, pp. 182–204.
22. M.D. Mathew, G. Sasikala, K. Bhanu Sankara Rao, and S.L. Mannan: Mater. Sci. Eng. A, 1991, vol. 148, pp. 253–60.10.1016/0921-5093(91)90827-A ↗
23. G. Sasikala, M.D. Mathew, K. Bhanu Sankara Rao, and S.L. Mannan: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1175–85.10.1007/s11661-000-0113-3 ↗
24. S. Degallix, J. Foct, and A. Hendry: Mater. Sci. Technol., 1986, vol. 2, pp. 946–50.10.1179/026708386790219624 ↗
25. P. Mullner, C. Solenthaler, P. Uggowietzer, and M.O. Spiedel: Mater. Sci. Eng. A, 1993, vol. 164, pp. 164–69.10.1016/0921-5093(93)90655-X ↗
26. Valentine G Gavriljuk and Hans Berns (eds.): in High Nitrogen Steels, Springer, Berlin, 1999, pp. 135–83.10.1007/978-3-662-03760-7_3 ↗
27. K. Oda, N. Kondo, and K. Shibata: ISIJ Int., 1990, vol. 30, pp. 625–31.10.2355/isijinternational.30.625 ↗
28. G. Wahlberg, U. Rolander, H.O. Andren, and J. Foct: in High Nitrogen Steels (HNS88), A. Hendry, eds., Institute of Metals, London, 1989, pp. 163–68.
29. R.E. Scframm and R.P. Reed: Metall. Trans., 1975, vol. 6A, pp. 1345–51.10.1007/BF02641927 ↗
30. N.I. Noskova, V.A. Pavlov, and S.A. Nemnonov: Phys. Met. Metallogr., 1965, vol. 20, p. 920.
31. J.K.L. Lai: Mater. Sci. Eng. A, 1983, vol. 61, pp. 101–9.10.1016/0025-5416(83)90191-X ↗