journal article·2015-05

Evaluation of the Mechanical Properties of AA 6063 Processed by Severe Plastic Deformation

Davoud Mashhadi Jafarlou, Erfan Zalnezhad, Abdelmagid Salem Hamouda, Ghader Faraji, Noor Azizi Bin Mardi, Mohsen Abdelnaeim Hassan Mohamed

Publisher page

Abstract

In this study, the mechanical properties, including surface hardness, tensile strength, fatigue, and fretting fatigue behavior of AA 6063 processed by equal channel angular pressing as the most efficient severe shear plastic deformation (SPD) technique, were investigated. Following the SPD process, samples were subjected to heat treatment (HT), hard anodizing (HA), and a combination of HT and HA. Rotating–bending fretting fatigue tests were performed to explore the samples’ response to the fretting condition. From the experimental fatigue and fretting fatigue tests, it was apparent that the SPD treatment had a positive effect on enhancing the fatigue and fretting fatigue lives of the samples at low and high-cyclic loads compared with the HT technique by 78 and 67 pct, and 131 and 154 pct respectively. The results also indicate that the SPD + HT technique significantly increased the fatigue and fretting fatigue lives of the samples at high and low cycles by 15.56 and 8.33 pct, and 14.4 and 5.1 pct respectively, compared with the SPD method. HA of AA6063 increased the fatigue and fretting fatigue lives of SPD + HT-processed samples at low cycle by 15.5 and 18.4 pct respectively; however, at high cycle, HA had reverse effects, whereby the fatigue and fretting fatigue lives of SPD + HT-processed samples decreased by 16.7 and 30 pct, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. W.S. Miller, L. Zhuang, J. Bottema, A.J. Wittebrood, P. De Smet, A. Haszler and A. Vieregge, Mater. Sci. Eng., A 2000, vol. 280, pp. 37-49.10.1016/S0921-5093(99)00653-X ↗
2. S. Heredia, S. Fouvry, B. Berthel and E. Greco, Int. J. Fatigue 2014, vol. 61, pp. 191-201.10.1016/j.ijfatigue.2013.11.009 ↗
3. R. Mahmoodian, R. G. Rahbari, M. Hamdi, M. A. Hassan and M. Sparham, JOM 2013, vol. 65, pp. 80-85.10.1007/s11837-012-0498-7 ↗
4. B. Rajasekaran, S. Ganesh Sundara Raman, S.V. Joshi and G. Sundararajan, Tribol. Int. 2008, vol. 41, pp. 315–322.10.1016/j.triboint.2007.08.007 ↗
5. L. Bouchama, N. Azzouz, N. Boukmouche, J.P. Chopart, A.L. Daltin and Y. Bouznit, Surf. Coat. Technol. 2013, vol. 235, pp. 676–684.10.1016/j.surfcoat.2013.08.046 ↗
6. R. Valiev, Nat. Mater. 2004, vol. 3, pp. 511-516.10.1038/nmat1180 ↗
7. V.M. Segal, Materials Science and Engineering A 1999, vol. 271, pp. 322-333.10.1016/S0921-5093(99)00248-8 ↗
8. R. Z. Valiev, N.A. Krasilnikov and N.K. Tsenev, Mater. Sci. Eng., A 1991, vol. 137, pp. 35–40.10.1016/0921-5093(91)90316-F ↗
9. Y. Saito, H. Utsunomiya, N. Tsuji and T. Sakai, Acta Mater. 1999, vol. 47, pp. 579-583.10.1016/S1359-6454(98)00365-6 ↗
10. A. Korbel, M. Richert, and J. Richert: Proceedings of Second RISO International Symposium on Metallurgy and Material Science, Roskilde, 1981, pp. 445–50.
11. H. Jafarzadeh, K. Abrinia and A. Babaei, Mater. Sci. Eng., A 2014, vol. 596, pp. 194-199.10.1016/j.msea.2013.12.037 ↗
12. J.Y. Huang, Y.T. Zhu, H. Jiang and T.C. Lowe, Acta Mater. 2001, vol. 49, pp. 1497–1505.10.1016/S1359-6454(01)00069-6 ↗
13. R.Z. Valiev, Y. Estrin, Z. Horita, T.G. Langdon, M.J. Zechetbauer and Y.T. Zhu, JOM 2006, vol. 58, pp. 33-39.10.1007/s11837-006-0213-7 ↗
14. A. Azushima, R. Kopp, A. Korhonen, D.Y Yang, F. Micari, G.D Lahoti, P. Groche, J. Yanagimoto, N. Tsuji, A. Rosochowski and A. Yanagida, CIRP Ann. 2008, vol. 57, pp. 716–735.10.1016/j.cirp.2008.09.005 ↗
15. Y. Estrin and A. Vinogradov, Int. J. Fatigue 2010, vol. 32, pp. 898-907.10.1016/j.ijfatigue.2009.06.022 ↗
16. R.Z. Valiev, I.V. Alexandrov, Y.T. Zhu and T.C. Lowe, J. Mater. Res. 2002, vol. 17, pp. 5-8.10.1557/JMR.2002.0002 ↗
17. V. Patlan, A. Vinogradov, K. Higashi and K. Kitagawa, Mater. Sci. Eng., A 2001, vol. 300, pp. 171-182.10.1016/S0921-5093(00)01682-8 ↗
18. P. Cavaliere and M. Cabibbo, Mater. Charact. 2008, vol. 59, pp. 197-203.10.1016/j.matchar.2006.12.013 ↗
19. A. Vinogradov, A. Washikita, K. Kitagawa and V.I. Kopylov, Mater. Sci. Eng., A 2003, vol. 349, pp. 318-32610.1016/S0921-5093(02)00813-4 ↗
20. P. Blanchard, C. Colombie, V. Pellerin, S. Fayeulle and L. Vincent, Metall. Trans. A 1991, vol. 22, pp. 1535-1544.10.1007/BF02667367 ↗
21. R.Z. Valiev, R.K. Islamgaliev and I.V. Alexandrov, Progress in Materials Science 2000, vol. 45, pp. 103-189.10.1016/S0079-6425(99)00007-9 ↗
22. V. Patil Basavaraj, Uday Chakkingal and T.S. Prasanna Kumar, journal of materials processing technology 2009, vol. 209, pp. 89–95.10.1016/j.jmatprotec.2008.01.031 ↗
23. Y. Iwahashi, J. Wang, Z. Horita, M. Nemoto and T.G. Langdon, Scr. Mater. 1996, vol. 35, pp. 143-146.10.1016/1359-6462(96)00107-8 ↗
24. Abaqus 6.11 User Documentation, Dassault Systèmes Simulia Corp, 2011.
25. M.A. Hassan, M.A.E. Saleh, N. Takakura, S. Ramesh and J. Purbolaksono, Materials & Design 2012, vol. 42, pp. 37–45.10.1016/j.matdes.2012.05.035 ↗
26. Davoud Jafarlou, Mohsen Hassan, Noor Azizi Mardi and Erfan Zalnezhad, Procedia Engineering 2014, vol. 81, pp. 1222 – 122710.1016/j.proeng.2014.10.101 ↗
27. S.S. Rao: The Finite Element Method in Engineering, Elsevier Science & Technology Books, New York, 2004.
28. Q.X. Pei, B.H. Hu, C. Lua and Y.Y. Wang, Scripta Mater. 2003, vol. 49, pp. 303–08.10.1016/S1359-6462(03)00284-7 ↗
29. ASM: Fatigue Failures, ASM International, Materials Park, 2010.
30. E. Zalnezhad, A.A.D. Sarhan, and P. Jahanshahi: Int. J. Adv. Manuf. Technol., 2014, vol. 70, pp. 2211–19.10.1007/s00170-013-5457-0 ↗
31. G. H. Majzoobi, R. Hojjati, M. Nematian, E. Zalnejad, A. R. Ahmadkhani and E. Hanifepoor, Transactions of the Indian Institute of Metals 2010, vol. 63, pp. 493-497.10.1007/s12666-010-0070-5 ↗
32. A.A.D. Sarhan, E. Zalnezhad, and M. Hamdi: Mater. Sci. Eng. A 2013, vol. 560, pp. 377–87.10.1016/j.msea.2012.09.082 ↗
33. Gonzalo M. Domínguez Almaraz, Jorge L. Ávila Ambriz and Erasmo Cadenas Calderón, Engineering Fracture Mechanics 2012, vol. 93, pp. 119–131.10.1016/j.engfracmech.2012.06.012 ↗
34. A.V. Nagasekhar and Y. Tick-Hon: Comput. Mater. Sci. 2004, vol. 30, pp. 489–95.10.1016/j.commatsci.2004.02.041 ↗
35. K. Wang, N.R. Tao, G. Liu, J. Lu and K. Lu, Acta Materialia 2006, vol. 54, pp. 5281–5291.10.1016/j.actamat.2006.07.013 ↗
36. Cheng Xu, Zenji Horita and Terence G. Langdon, Acta Materialia 2007, vol. 55, pp. 203-212.10.1016/j.actamat.2007.06.043 ↗
37. H. Jafarzadeh, K. Abrinia, and A. Babaei: Mater. Sci. Eng. A, 2014, vol. 609, pp. 65–71.10.1016/j.msea.2014.04.096 ↗
38. S. Li, M.A.M. Bourke, I.J. Beyerlein, D.J. Alexander and B. Clausen, Materials Science and Engineering A 2004, vol. 382, pp. 217-236.10.1016/j.msea.2004.04.067 ↗
39. Wei Wei, A.V. Nagasekhar, Guang Chen, Yip Tick-Hon and Kun Xia Wei, Scripta Materialia 2006, vol. 54, pp. 1865–1869.10.1016/j.scriptamat.2006.02.026 ↗
40. D.J. Dunstan and A.J. Bushby, Int. J. Plast. 2014, vol. 53, pp. 56–65.10.1016/j.ijplas.2013.07.004 ↗
41. Z. Horita and T.G. Langdon, Mater. Sci. Eng., A 2005, vol. 410–411, pp. 422–425.10.1016/j.msea.2005.08.133 ↗
42. Drew V. Nelson, Experimental Mechanics 1977, vol. 17, pp. 41-49.10.1007/BF02326425 ↗
43. S. Suresh: Fatigue of Materials, Cambridge University Press, Cambridge, 1998.10.1017/CBO9780511806575 ↗
44. S.G. Pantelakis and A.Th. Kermanidis: in Multiscale Fatigue Crack Initiation and Propagation of Engineering Materials: Structural Integrity and Microstructural Worthiness, G.M.L. Gladwell, Springer, 2008.
45. S. Stanzl-Tschegg, Int. J. Fatigue 2014, vol. 60, pp. 2-17.10.1016/j.ijfatigue.2012.11.016 ↗
46. E. Zalnezhad, S. baradaran, A.R. Bushroa, and A.A.D. Sarhan: Metall. Mater. Trans. A, 2013, vol. 45, pp. 785–97.
47. M.P. Szolwinski and T.N. Farris, Wear 1996, vol. 198, pp. 93-107.10.1016/0043-1648(96)06937-2 ↗
48. E. Zalnezhad, A.A.D. Sarhan, and M. Hamdi: Mater. Sci. Eng. A, 2013, vol. 559, pp. 436–46.10.1016/j.msea.2012.08.123 ↗