journal article·2014-07

Evaluating the Superplastic Flow of a Magnesium AZ31 Alloy Processed by Equal-Channel Angular Pressing

Roberto B. Figueiredo, Terence G. Langdon

Publisher page

Abstract

Experiments show that the magnesium AZ31 (Mg-3 pct Al-1 pct Zn) alloy exhibits excellent superplastic properties at 623 K (350 °C) after processing by equal-channel angular pressing using a die with a channel angle of 135 deg and a range of decreasing processing temperatures from 473 K to 413 K (200 °C to 140 °C). A maximum elongation to failure of ~1200 pct was achieved in this alloy at a tensile strain rate of 1.0 × 10−4 s−1. Microstructural inspection showed evidence for cavity formation and grain growth during tensile testing with the grain growth leading to significant strain hardening. An examination of the experimental data shows that grain boundary sliding is dominant during superplastic flow. Furthermore, a comprehensive review of the present results and extensive published data for the AZ31 alloy shows the exponent of the inverse grain size is given by p ≈ 2 which is consistent with grain boundary sliding as the rate-controlling flow mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. R.Z. Valiev and T.G. Langdon: Prog. Mater. Sci., 2006, vol. 51, pp. 881–981.10.1016/j.pmatsci.2006.02.003 ↗
2. M. Kawasaki and T.G. Langdon: J. Mater. Sci., 2007, vol. 42, pp. 1782–96.10.1007/s10853-006-0954-2 ↗
3. A. Yamashita, Z. Horita, and T.G. Langdon: Mater. Sci. Eng. A 2001, vol. 300, pp. 142–47.10.1016/S0921-5093(00)01660-9 ↗
4. Z. Horita, K. Matsubara, K. Makii, and T.G. Langdon: Scripta Mater., 2002, vol. 47, pp. 255–60.10.1016/S1359-6462(02)00135-5 ↗
5. R.B. Figueiredo and T.G. Langdon: J. Mater. Sci., 2010, vol. 45, pp. 4827–36.10.1007/s10853-010-4589-y ↗
6. M. Furui, H. Kitamura, H. Anada, and T.G. Langdon: Acta Mater., 2007, vol. 55, pp. 1083–91.10.1016/j.actamat.2006.09.027 ↗
7. R.B. Figueiredo, P.R. Cetlin, and T.G. Langdon: Acta Mater., 2007, vol. 55, pp. 4769–79.10.1016/j.actamat.2007.04.043 ↗
8. K. Xia, J.T. Wang, X. Wu, G. Chen, and M. Gurvan: Mater. Sci. Eng. A, 2005, vol. 410–411, pp. 324–27.10.1016/j.msea.2005.08.123 ↗
9. K. Matsubara, Y. Miyahara, Z. Horita and T.G. Langdon: Acta Mater., 2003, vol. 51, pp. 3073–84.10.1016/S1359-6454(03)00118-6 ↗
10. R. Lapovok, P.F. Thomson, R. Cottam, and Y. Estrin: Mater. Sci. Eng. A, 2005, vol. 410–411, pp. 390–93.10.1016/j.msea.2005.08.067 ↗
11. H.K. Kim and W.J. Kim: Mater. Sci. Eng. A, 2004, vol. 385, pp. 300–8.10.1016/j.msea.2004.06.055 ↗
12. A. Mussi, J.J. Blandin, L. Salvo, and E.F. Rauch: Acta Mater., 2006, vol. 54, pp. 3801–09.10.1016/j.actamat.2006.04.011 ↗
13. S.X. Ding, C.P. Chang, and P.W. Kao: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 415–25.10.1007/s11661-008-9747-3 ↗
14. R.B. Figueiredo and T.G. Langdon: Scripta Mater., 2009, vol. 61, pp. 84–7.10.1016/j.scriptamat.2009.03.012 ↗
15. H.K. Lin, J.C. Huang and T.G. Langdon: Mater. Sci. Eng. A, 2005, vol. 402, pp. 250–57.10.1016/j.msea.2005.04.018 ↗
16. T.G. Langdon: J. Mater. Sci., 2009, vol. 44, pp. 5998–6010.10.1007/s10853-009-3780-5 ↗
17. R. Lapovok, Y. Estrin, M.V. Popov, and T.G. Langdon: Adv. Eng. Mater., 2008, vol. 10, pp. 429–33.10.1002/adem.200700363 ↗
18. R.B. Figueiredo and T.G. Langdon: J. Mater. Sci., 2008, vol. 43, pp. 7366–71.10.1007/s10853-008-2846-0 ↗
19. M. Kawasaki, N. Balasubramanian, and T.G. Langdon: Mater. Sci. Eng., 2011, vol. A528, pp. 6624–29.10.1016/j.msea.2011.05.005 ↗
20. T.G. Langdon: Acta Metall. Mater., 1994, vol. 42, pp. 2437–43.10.1016/0956-7151(94)90322-0 ↗
21. M. Furukawa, Y. Iwahashi, Z. Horita, M. Nemoto, and T.G. Langdon: Mater. Sci. Eng., 1998, vol. A257, pp. 328–32.10.1016/S0921-5093(98)00750-3 ↗
22. Y. Iwahashi, J. Wang, Z. Horita, M. Nemoto, and T.G. Langdon: Scripta Mater., 1996, vol. 35, pp. 143–46.10.1016/1359-6462(96)00107-8 ↗
23. F.A. Mohamed and T.G. Langdon: Acta Metall., 1975, vol. 23, pp. 117–24.10.1016/0001-6160(75)90076-0 ↗
24. T.G. Langdon: Met. Sci., 1982, vol. 16, pp. 175–83.10.1179/030634582790427208 ↗
25. S.S. Vagarali and T.G. Langdon: Acta Metall., 1982, vol. 30, pp. 1157–70.10.1016/0001-6160(82)90009-8 ↗
26. R.B. Figueiredo, S. Terzi, and T.G. Langdon: Acta Mater., 2010, vol. 58, pp. 5737–48.10.1016/j.actamat.2010.06.049 ↗
27. R.B. Figueiredo and T.G. Langdon: Rev. Adv. Mater. Sci., 2010, vol. 25, pp. 249–55.
28. R.B. Figueiredo and T.G. Langdon: Mater. Sci. Eng. A, 2012, vol. 556, pp. 211–20.10.1016/j.msea.2012.06.079 ↗
29. A.H. Chokshi and T.G. Langdon: Acta Metall., 1989, vol. 37, pp. 715–23.10.1016/0001-6160(89)90255-1 ↗
30. A.H. Chokshi and T.G. Langdon: Acta Metall. Mater., 1990, vol. 38, pp. 867–77.10.1016/0956-7151(90)90040-N ↗
31. M.V. Speight and W. Beere: Met. Sci., 1975, vol. 9, pp. 190–91.10.1179/030634575790445161 ↗
32. J.W. Hancock: Met. Sci., 1976, vol. 10, pp. 319–25.10.1179/msc.1976.10.9.319 ↗
33. A.H. Chokshi and T.G. Langdon: Acta Metall., 1987, vol. 35, pp. 1089–1101.10.1016/0001-6160(87)90056-3 ↗
34. H. Somekawa, H. Watanabe, T. Mukai, and K. Higashi: Scripta Mater., 2003, vol. 48, pp. 1249–54.10.1016/S1359-6462(03)00054-X ↗
35. J.A. del Valle, F. Carreño, and O.A. Ruano: Scripta Mater., 2007, vol. 57, pp. 829–32.10.1016/j.scriptamat.2007.07.002 ↗
36. R.B. Figueiredo and T.G. Langdon: Adv. Eng. Mater., 2008, vol. 10, pp. 37–40.10.1002/adem.200700315 ↗
37. R.B. Figueiredo and T.G. Langdon: Mater. Sci. Forum, 2008, vol. 584–586, pp. 170–75.10.4028/www.scientific.net/MSF.584-586.170 ↗
38. J.A. Del Valle and O.A. Ruano: Acta Mater., 2007, vol. 55, pp. 455–66.10.1016/j.actamat.2006.08.039 ↗
39. S. Spigarelli, O.A. Ruano, M. El Mehtedi, and J.A. del Valle: Mater. Sci. Eng. A, 2013, vol. 570, pp. 135–48.10.1016/j.msea.2013.01.060 ↗
40. K. Kitazono, E. Sato, and K. Kuribayashi: Scripta Mater., 2001, vol. 44, pp. 2695–702.10.1016/S1359-6462(01)00967-8 ↗
41. H.K. Lin and J.C. Huang: Mater. Trans., 2002, vol. 43, pp. 2424–32.10.2320/matertrans.43.2424 ↗
42. J.A. del Valle, M.T. Pérez-Prado, and O.A. Ruano: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1427–38.10.1007/s11661-005-0235-8 ↗
43. S.B. Yi, S. Zaefferer, and H.-G. Brokmeier: Mater. Sci. Eng. A, 2006, vol. 424, pp. 275–81.10.1016/j.msea.2006.03.022 ↗
44. F.K. Abu-Farha and M.K. Khraisheh: Adv. Eng. Mater., 2007, vol. 9, pp. 777–83.10.1002/adem.200700155 ↗
45. S.H. Kang, Y.S. Lee, and J.H. Lee: J. Mater. Proc. Technol., 2008, vol. 201, pp. 436–40.10.1016/j.jmatprotec.2007.11.305 ↗
46. R. Panicker, A.H. Chokshi, R.K. Mishra, R. Verma and, P.E. Krajewski: Acta Mater., 2009, vol. 57, pp. 3683–93.10.1016/j.actamat.2009.04.011 ↗
47. H.J. Frost and M.F. Ashby: Deformation-Mechanism Maps: The Plasticity and Creep of Metals and Ceramics., Pergamon Press, Oxford, 1982.