Role of Si in Improving the Shape Recovery of FeMnSiCrNi Shape Memory Alloys
Source abstract
Abstract
The effect of Si addition on the microstructure and shape recovery of FeMnSiCrNi shape memory alloys has been studied. The microstructural observations revealed that in these alloys the microstructure remains single-phase austenite (γ) up to 6 pct Si and, beyond that, becomes two-phase γ + δ ferrite. The Fe5Ni3Si2 type intermetallic phase starts appearing in the microstructure after 7 pct Si and makes these alloys brittle. Silicon addition does not affect the transformation temperature and mechanical properties of the γ phase until 6 pct, though the amount of shape recovery is observed to increase monotonically. Alloys having more than 6 pct Si show poor recovery due to the formation of δ-ferrite. The shape memory effect (SME) in these alloys is essentially due to the γ to stress-induced e martensite transformation, and the extent of recovery is proportional to the amount of stress-induced e martensite. Alloys containing less than 4 pct and more than 6 pct Si exhibit poor recovery due to the formation of stress-induced α′ martensite through γ-e-α′ transformation and the large volume fraction of δ-ferrite, respectively. Silicon addition decreases the stacking fault energy (SFE) and the shear modulus of these alloys and results in easy nucleation of stress-induced e martensite; consequently, the amount of shape recovery is enhanced. The amount of athermal e martensite formed during cooling is also observed to decrease with the increase in Si.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Microstructure and Mechanical Properties of Steels · X-ray Diffraction in Crystallography
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. K. Enami, A. Nagasawa, and S. Nenno: Scripta Metall., 1975, vol. 9, pp. 941–48.10.1016/0036-9748(75)90549-9 ↗
2. A. Sato, E. Chisima, K. Soma, and T. Mori: Acta Metall., 1982, vol. 30, pp. 1177–83.10.1016/0001-6160(82)90011-6 ↗
3. M. Murakami, H. Otsuka, H. Suzuki, and S. Matsuda: Trans. ISIJ, 1987, vol. 27, p. B-88.
4. H. Otsuka, H. Yamada, H. Tanahashi, and T. Maruyama: Mater. Sci. Forum, 1990, vols. 56–58, pp. 655–60.10.4028/www.scientific.net/MSF.56-58.655 ↗
5. T.Y. Hsu: J. Mater. Sci. Technol., 1994, vol. 10, pp. 107–10.
6. A. Ariapour, I. Yakubtsov, and D. Perovic: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1621–28.10.1007/s11661-001-0140-8 ↗
7. H. Otsuka, S. Kajiwara, and T. Ishihara: Mater. Charact., 1994, vol. 32, pp. 229–35.10.1016/1044-5803(94)90092-2 ↗
8. S. Kajiwara, D. Liu, T. Kikuchi, and N. Shinya: Scripta Mater., 2001, vol. 44, pp. 2809–14.10.1016/S1359-6462(01)00978-2 ↗
9. A. Sato, Y. Yamaji, and T. Mori: Acta Metall., 1986, vol. 34, pp. 287–94.10.1016/0001-6160(86)90199-9 ↗
10. M. Murakami, H. Otsuka, H. Suzuki, and S. Matsuda: Proc. Int. Conf. on Martensitic Transformations (ICOMAT-86), Nara, Japan, 1986, pp. 985–90.
11. M. Andersson, R. Stalmans, and J. Agren: Acta Metall., 1998, vol. 46, pp. 3883–91.
12. A.A. Gulyaev: J. Phys. IV, 1995, vol. 5, pp. 469–74.10.1051/jp4:1995871 ↗
13. X. Tian and Y. Zhang: Mater. Sci. Eng. A, 2009, vol. 516A, pp. 73–77.10.1016/j.msea.2009.02.031 ↗
14. K. Tsuzaki, M. Ikegami, Y. Tomota, K. Kurokawa, W. Nakagawara, and T. Maki: Mater. Trans. JIM, 1992, vol. 33, pp. 236–70.10.2320/matertrans1989.33.263 ↗
15. Y. Tamota, M. Piao, T. Hasunuma, and Y. Kimura: Jpn. Inst. Met., 1990, vol. 54, pp. 628–34.10.2320/jinstmet1952.54.6_628 ↗
16. V.G. Gavriljuk, V.V. Bliznuk, B.D. Shanina, and S.P. Kolesnik: Mater. Sci. Eng. A, 2005, vol. 406A, pp. 1–10.10.1016/j.msea.2005.05.043 ↗
17. H. Otsuka, H. Yamada, T. Maruyama, H. Tanahashi, S. Matsuda, and M. Murakami: ISIJ Int., 1990, vol. 30, pp. 674–79.10.2355/isijinternational.30.674 ↗
18. F.B. Pickering: Physical Metallurgy and the Design of Steels, Applied Science Publishers Ltd., London, 1978, p. 226.
19. E.I. Gladyshevskii, P.I. Kripyakevich, and Y.B. Kuz’ma: J. Str. Chem., 1962, vol. 3, pp. 402–10.10.1007/BF00744082 ↗
20. H.M. Rietveld: Acta Cryst., 1967, vol. 22, pp. 151–52.10.1107/S0365110X67000234 ↗
21. A. Le Bail, H. Duroy, and J.L. Fourquet: Mater. Res. Bull., 1988, vol. 23, pp. 447–52.10.1016/0025-5408(88)90019-0 ↗
22. J.H. Yang and C.M. Wayman: Mater. Character., 1992, vol. 28, pp. 23–35.10.1016/1044-5803(92)90026-E ↗
23. B.C. Maji, M. Krishnan, and V.V. Rama Rao: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1029–42.10.1007/s11661-003-0124-y ↗
24. L. Federzoni and G. Guenin: Scripta Metall. Mater., 1994, vol. 31, pp. 25–30.10.1016/0956-716X(94)90089-2 ↗
25. J.H. Jun, W. Jin, and C.S. Choi: Scripta Metall. Mater., 1995, vol. 33, pp. 1339–44.10.1016/0956-716X(95)00368-6 ↗
26. J.H. Yang and C.M. Wayman: Metall. Trans. A, 1992, vol. 23A, pp. 1445–54.10.1007/BF02647328 ↗
27. B.C. Maji and M. Krishnan: Scripta Mater., 2003, vol. 48, pp. 71–77.10.1016/S1359-6462(02)00348-2 ↗
28. C. Zhao: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2599–2604.10.1007/s11661-999-0299-y ↗
29. B.E. Warren and B.L. Averbach: J. Appl. Phys., 1950, vol. 21, pp. 595–99.10.1063/1.1699713 ↗
30. Schramm and R.P. Reed: Metall. Trans. A, 1975, vol. 6A, pp. 1345–51.10.1007/BF02641927 ↗
31. G. Ghosh and G.B. Olson: Acta Mater., 2002, vol. 50, pp. 2655–75.10.1016/S1359-6454(02)00096-4 ↗