Two-Phase Modeling of Hot Tearing in Aluminum Alloys: Applications of a Semicoupled Method
Source abstract
Abstract
Hot tearing formation in both a classical tensile test and during direct chill (DC) casting of aluminum alloys has been modeled using a semicoupled, two-phase approach. Following a thermal calculation, the deformation of the mushy solid is computed using a compressive rheological model that neglects the pressure of the intergranular liquid. The nonzero expansion/compression of the solid and the solidification shrinkage are then introduced as source terms for the calculation of the pressure drop and pore formation in the liquid phase. A comparison between the simulation results and experimental data permits a detailed understanding of the specific conditions under which hot tears form under given conditions. It is shown that the failure modes can be quite different for these two experiments and that, as a consequence, the appropriate hot tearing criterion may differ. It is foreseen that a fully predictive theoretical tool could be obtained by coupling such a model with a granular approach. These two techniques do, indeed, permit coverage of the range of the length scales and the physical phenomena involved in hot tearing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Bauxite Residue and Utilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. D.G. Eskin, Suyitno, and L. Katgerman: Prog. Mater. Sci., 2004, vol. 49, pp. 629–711.10.1016/S0079-6425(03)00037-9 ↗
2. U. Feurer: Giessereiforschung, 1976, vol. 28, pp. 750–80.
3. T.W. Clyne, and G.J. Davies: J. Brit. Foundry, 1981, vol. 74, pp. 65–73.
4. M. Rappaz, J.-M. Drezet, and M. Gremaud: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 449–55.10.1007/s11661-999-0334-z ↗
5. D. Warrington, and D.G. McCartney: Cast Met., 1989, vol. 2, pp. 134–43.10.1080/09534962.1989.11818994 ↗
6. J.A. Spittle, and A.A. Cushway: Met. Technol., 1983, vol. 10, pp. 6–13.10.1179/030716983803291226 ↗
7. J.-M. Drezet, and M. Rappaz: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3214–25.10.1007/BF02663872 ↗
8. M. M’Hamdi, A. Mo, and H.G. Fjaer: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 3069–83.10.1007/s11661-006-0188-6 ↗
9. O. Ludwig, J.-M. Drezet, C.L. Martin, and M. Suéry: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1525–35.10.1007/s11661-005-0244-7 ↗
10. C. Pequet, M. Gremaud, and M. Rappaz: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2095–2106.10.1007/s11661-002-0041-5 ↗
11. D.J. Lahaie, and M. Bouchard: Metall. Mater. Trans. B, 2001, vol. 32B, pp. 697–705.10.1007/s11663-001-0124-5 ↗
12. B. Magnin, L. Maenner, L. Katgerman, and S. Engler: Mater. Sci. Forum, 1996, vols. 217–222, pp. 1209–14.10.4028/www.scientific.net/MSF.217-222.1209 ↗
13. V. Mathier, M. Rappaz, and A. Jacot: Model. Simul. Mater. Sci. Eng., 2004, vol. 12, pp. 479–90.10.1088/0965-0393/12/3/009 ↗
14. S. Vernède, and M. Rappaz: Philos. Mag, 2006, vol. 86, pp. 3779–94.10.1080/14786430500228705 ↗
15. A. Stangeland, A. Mo, M. M’Hamdi, D. Viano, and C. Davidson: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 705–14.10.1007/s11661-006-0042-x ↗
16. M. M’Hamdi, S. Benum, D. Mortensen, H.G. Fjaer, and J.-M. Drezet: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1941–52.10.1007/s11661-003-0159-0 ↗
17. V. Mathier, J.-M. Drezet, and M. Rappaz: Model. Simul. Mater. Sci. Eng., 2007, vol. 15, pp. 121–34.10.1088/0965-0393/15/2/008 ↗
18. V. Mathier: Doctoral Thesis, Ecole Polytechnique Fédérale de Lausanne, Lausanne, Switzerland, 2007.
19. V. Mathier, P.-D. Grasso, and M. Rappaz: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1399–1409.10.1007/s11661-008-9529-y ↗
20. V. Mathier, J.-M. Drezet, and M. Rappaz: MCWASP XI, Opio, France, The Minerals, Metals & Materials Society, TMS, Warrendale, 2006, pp. 643–50.
21. O. Ludwig, J.-M. Drezet, P. Ménès, C.L. Martin, and M. Suéry: Mater. Sci. Eng., A, 2005, vols. 413–414, pp. 174–79.10.1016/j.msea.2005.09.087 ↗
22. W.M. Van Haaften, B. Magnin, W.H. Kool, and L. Katgerman: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1971–80.10.1007/s11661-002-0030-8 ↗
23. H.G. Fjaer, and A. Mo: Metall. Trans. B, 1990, vol. 21B, pp. 1049–61.
24. L.C. Nicolli, A. Mo, and M. M’Hamdi: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 433–42.10.1007/s11661-005-0314-x ↗
25. B. Commet, P. Delaire, J. Rabenberg, and J. Storm: Light Met., 2003, pp. 711–17.
26. P.-D. Grasso: Doctoral Thesis, Ecole Polytechnique Fédérale de Lausanne, Lausanne, Switzerland, 2004.
27. J.-M. Drezet: Doctoral Thesis, Ecole Polytechnique Federale de Lausanne, Lausanne, Switzerland, 1996.
28. A. Stangeland, A. Mo, and D. Eskin: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2219–29.10.1007/BF02586141 ↗
29. Suyitno, W.H. Kool, and L. Katgerman: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1537–46.10.1007/s11661-005-0245-6 ↗
30. S. Vernède, P. Jarry, and M. Rappaz: Acta Mater., 2006, vol. 54, pp. 4023–34.10.1016/j.actamat.2006.04.035 ↗