The Effect of Twins on the Mechanical Behavior of Boron Carbide
Source abstract
Abstract
The microstructure and mechanical properties of boron carbide (B4C) samples processed by slip casting were compared with those processed by the conventional hot-pressing technique. Although the quasi-static and dynamic mechanical experiments showed comparable results between the slip-cast and hot-pressed B4C, scanning electron microscopy and electron backscattered diffraction of the B4C samples revealed significant differences in the microstructure. A notable difference was the numerous growth twins in the slip-cast samples. The twin planes were determined to be $$ \left\{ { 10\bar{1} 1} \right\} $$ and consisted of 35 pct of the boundary population in the slip-cast B4C but only 1 pct of the boundary population in the hot-pressed B4C. It was hypothesized that the presence of twins will cause a different failure mechanism. The effect of the twins on the stress state was examined by finite-element simulations and will also be discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Boron and Carbon Nanomaterials Research · Metal and Thin Film Mechanics · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. A. Matsumoto, A. Kawakami, and T. Goto: in Ceramic Transactions, vol. 133, Eds. M. Matsui, S. Jahanmir, H. Mostaghaci, M. Naito, K. Uematsu, R. Wasche, and R. Morrell, The American Ceramics Society, Westerville, OH, 2002, pp. 223–28.
2. A. Matsumoto, T. Goto, and A. Kawakami: J. Ceram. Soc. Jpn, Suppl., 2004, vol. 112, pp. S399-402.
3. A. Badmos and D.G. Ivey: J. Mater. Sci., 2001, vol. 36, pp. 4995-5005.10.1023/A:1011885631876 ↗
4. M.W. Chen, J.W. McCauley, J.C. LaSalvia, and K.J. Hemker: J. Am. Ceram. Soc., 2005, vol. 88, pp. 1935-42.10.1111/j.1551-2916.2005.00346.x ↗
5. T. Sano, E.S.C. Chin, B. Paliwal, and M.W. Chen: in Ceramic Transactions, vol. 203, N.P. Bansal and J.P. Singh, eds., The American Ceramics Society, Westerville, OH, 2009, pp. 107–15.10.1002/9780470522189.ch10 ↗
6. J.J. Swab: Int. J. Appl. Ceram. Tech., 2004, vol. 1, pp. 219-25.10.1111/j.1744-7402.2004.tb00173.x ↗
7. J.M.J. den Toonder, J.A.W. van Dommelen, and F.P.T. Baaijens: Modelling Simul. Mater. Sci. Eng., 1999, vol. 7, pp. 909-28.10.1088/0965-0393/7/6/301 ↗
8. T.J. Holmquist and G.R. Johnson: Int. J. Impact Eng., 2008, vol. 35, pp. 742-52.10.1016/j.ijimpeng.2007.08.003 ↗
9. K.J. McClellan, F. Chu, J.M. Roper, and I. Shindo: J. Mater. Sci., 2001, vol. 36, pp. 3403–07.10.1023/A:1017947625784 ↗
10. G.S. Oleinik and T.V. Ostapchuk: Powder Metall. Met. Ceram., 1995, vol. 34, pp. 500–04.10.1007/BF00559956 ↗
11. R. Ruh, M. Kearns, A. Zangvil, and Y. Xu: J. Am. Ceram. Soc., 1992, vol. 75, pp. 864-72.10.1111/j.1151-2916.1992.tb04152.x ↗