journal article·2014-12Open access

The Impact of Strain Reversal on Microstructure Evolution and Orientation Relationships in Ti-6Al-4V with an Initial Alpha Colony Microstructure

K. Muszka, M. Lopez-Pedrosa, K. Raszka, M. Thomas, W. M. Rainforth, B. P. Wynne

Abstract

Abstract The effect of forward and reverse torsion on flow behavior and microstructure evolution, particularly dynamic and static spheroidization, on Ti-6Al-4V with an alpha lamella colony microstructure was studied. Testing was undertaken sub beta transus [1088 K (815 °C)] at strain rates of either 0.05 or 0.5 s−1. Quantitative metallography and electron back scatter diffraction has identified that a critical monotonic strain (ε c) in the range of 0.3 to 0.6 is required to initiate rapid dynamic spheroidization of the alpha lamella. For material deformed to strains below ε c and then reversed to a zero net strain the orientation relationships between alpha colonies are close to ideal Burgers, enabling prior beta grains to be fully reconstructed. Material deformed to strains greater than ε c and reversed lose Burgers and no beta reconstruction is possible, suggesting ε c is the strain required to generate break-up of lamella. Static spheroidization is, however, sensitive to strain path around ε c. Annealing at 1088 K (815 °C) for 4 hours for material subjected to 0.25 forward + 0.25 forward strain produces 48 pct spheroidized grains while material with 0.25 forward + 0.25 reverse strain has 10 pct spheroidization. This is believed to be a direct consequence of different levels of the stored energy between these two strain paths.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Metallurgy and Material Forming · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. S.L. Semiatin, V. Seetharaman, and I. Weiss: Mater. Sci. Eng., 1999, vol. A263, pp. 257–71.10.1016/S0921-5093(98)01156-3 ↗
2. S.P. Fox and D.F. Neal: Proceedings of the 8th World Conference on Titanium, Titanium’95, P.A. Blenkinsop, W.J. Evans, and H.M. Flower, eds., Institute of Materials, London, 1995, pp. 628–35.
3. A.F. Wilson, V. Venkatesh, R Pather, J.W. Brooks, and S.P. Fox: The Prediction of Microstructure Development During Timetal 6-4 Billet Manufacture, Titanium, 2003, pp. 321–28.
4. R.M. Poths, G. Angela, B.P. Wynne, W.M. Rainforth, S.L. Semiatin, and J.H. Beynon, Metall. Mater. Trans., 2004, vol. 35A, pp. 2993–3001.10.1007/s11661-004-0246-x ↗
5. S.L. Semiatin and N. Stefansson: Metall. Mater. Trans., 2003, vol. 34A, pp. 691–98.
6. D.F. Fields and W.A. Backofen: ASTM Proceedings of the 60th Annual Meeting, 1957, vol. 57, pp. 1259–72.
7. P.S. Davis: Ph.D. Thesis, The University of Sheffield, Sheffield, UK, 2009.
8. N. Stanford and P. Bate: Acta Mater., 2004, vol. 52, pp. 5215–24.10.1016/j.actamat.2004.07.034 ↗
9. N. Gey and M. Humbert: Acta Mater., 2002, vol. 50, pp. 277–87.10.1016/S1359-6454(01)00351-2 ↗
10. D.R. Barraclough, H.J. Whittaker, K.D. Nair, and C.M. Sellars: J. Test. Eval., 1973, vol. 1, pp. 220–26.10.1520/JTE10007J ↗
11. S.B. Davenport, R.L. Higginson, and C.M. Sellars: Philos. Trans. R. Soc. Lond., 1999, vol. A357, pp. 1645–61.10.1098/rsta.1999.0394 ↗
12. Q. Zhu and C.M. Sellars: in Proceedings 2nd International Conference on Modelling of Metal Rolling Processes, London, 9–11 September 1996, J.H. Beynon, P. Ingham, H. Teichert, and K. Waterson, eds., The Institute of Materials, London, 1996, p. 158.
13. N. Stefansson, S.L. Semiatin, and D. Eylon: Metall. Mater. Trans., 2002, vol. 33A, pp. 3527–34.10.1007/s11661-002-0340-x ↗
14. S.L. Semiatin and J.J. Jonas: Formability and Workability of Metals: Plastic Instability and Flow Localization, ASM International, Metals Park, 1984.