On the Roles of Oxidation and Vaporization in Surface Micro-structural Instability during Solution Heat Treatment of Ni-base Superalloys
Source abstract
Abstract
Micro-structural instability at the surface that develops during solution heat treatment of a typical third generation Ni-base superalloy, CMSX10N has been reported. It is shown that elemental Ni vaporizes from the surface during solutioning leading to de-stabilization of γ phase. With increasing extent of vaporization, a phase mixture of β, γ′, and the refractory (W and Re-rich) precipitates occur within the surface layers resulting in the complete breakdown of the cuboidal γ/γ′ phase morphology that is usually observed. It is demonstrated that the conditions at the surface have a marked effect on the vaporization kinetics and subsequent evolution of surface phases—the presence of a continuous dense oxide such as Al2O3 or the presence of sacrificial Ni-foils interspersed in the furnace significantly suppresses elemental vaporization from the sample surface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · High-Temperature Coating Behaviors · nanoparticles nucleation surface interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. G. L. Erickson, J. of Metals, 1995, Vol. 47, pp. 36-39.
2. H. T. Pang, H. B. Dong, R. Beanland, H. J. Stone, C. M. F. Rae, P.A. Midgley, G. Brewster, N. D’Souza, Metall. Mater. Trans A., Vol. 40, 2009, pp. 1660–69.10.1007/s11661-009-9855-8 ↗
3. N. D’Souza and H.B. Dong: Scripta Mater., 2007, vol. 56, pp. 41–44.10.1016/j.scriptamat.2006.08.060 ↗
4. S.-M. Seo, J.-H. Lee, Y.-S. Yoo, C.-Y. Jo, H. Miyahara, and K. Ogi: in Superalloys 2008, R.C. Reed, K.A. Green, P. Caron, T. Gabb, M.G. Fahrmann, E.S. Huron, and S.A. Woodard, eds., TMS, Warrendale, PA, 2008, pp. 277–86.10.7449/2008/Superalloys_2008_277_286 ↗
5. N. Warnken, D. Ma, M. Mathes, I. Steinbach, Mater Sci. Eng. A, 2005, Vol. 413–414, pp. 267–71.10.1016/j.msea.2005.09.067 ↗
6. C. Walter, B. Hallstedt, N. Warnken, Mater Sci. Eng. A, 2005, Vol. 397, pp. 385–90.10.1016/j.msea.2005.02.056 ↗
7. G. E. Fuchs: Mater Sci. Eng. A, 2001, Vol. 300A, pp. 52–60.10.1016/S0921-5093(00)01776-7 ↗
8. N. Warnken, H. Larrson, R. C. Reed, Mater Sci. Tech, 2009, Vol. 25, pp. 179–85.10.1179/174328408X369320 ↗
9. S.L. Semiatin, R.C. Kramb, R.R. Turner, F. Zhang, and M.M. Anthony: Scripta Met., 2004, vol. 51, pp. 491–95.10.1016/j.scriptamat.2004.05.049 ↗
10. M.S.A. Karunaratne, D.C. Cox, P. Carter, and R.C. Reed: in Superalloys 2000, T.M. Pollock, R.D. Kissinger, R.R. Bowman, K.A. Green, M. McLean, S. Olson, and J.J. Schirra, eds., TMS, Warrendale, PA, 2000, pp. 201–10.
11. N. D’Souza, S. Simmonds, G. D. West, H. B. Dong, Metall. Mater. Trans A., Vol. 44A, 2013, pp. 4764–73.10.1007/s11661-013-1816-6 ↗
12. C. B. Alcock, V. P. Itken, M. K. Horrigan, Can. Met. Quart., Vol. 23, 1984, pp. 309–13.10.1179/cmq.1984.23.3.309 ↗
13. Heat Resistant Materials, J.R. Davis, ed., ASM International, Issue 1, pp. 290–308, 1997.
14. J.R. Griffin and S.W. Kennedy: Vacuum Technology—Practical heat treating and Brazing, Roger Fabian ed., ASM International, Issue 1, pp. 1–24, 1993.
15. A. Powell, J. Van Den Avyle, B. Damkroger, J. Szekely, U. Pal, Metall. Mater. Trans. B, Vol. 28B, 1997, pp. 1227–39.10.1007/s11663-997-0078-3 ↗
16. I. Langmuir, Physikalische Zeitschrift, Vol. 14, 1913, pp. 1273-80.
17. G. Brewster, N. D’Souza, K. Ryder, S. Simmonds, H. B. Dong, Metall. Mater. Trans A., Vol. 43A, 2012, pp. 1288–302.10.1007/s11661-011-1027-y ↗
18. G. Brewster, H.B. Dong, N.R. Green, and N. D’Souza, Metall. Mater. Trans. B, 2008, vol. 39B, pp. 87–93.10.1007/s11663-007-9118-2 ↗
19. C. M. Younes, G. C. Allen, J. A. Nicholson, Corr. Eng. Sci. Tech., Vol. 27, 2002, pp. 80–88.
20. I.M. Edmonds, H.E. Evans, and C.N. Jones: in Superalloys 2008, R.C. Reed, K.A. Green, P. Caron, T. Gabb, M.G. Fahrmann, E.S. Huron, and S.A. Woodard, eds., TMS, Warrendale, PA, 2008, pp. 661–70.10.7449/2008/Superalloys_2008_661_670 ↗
21. H. J. Grabke, Intermetallics, Vol. 7, 1999, pp. 1153–58.10.1016/S0966-9795(99)00037-0 ↗
22. Y. Zhang, J. A. Haynes, B. A. Pint, I. G. Wright, W. Y. Lee, Surf Coat. Tech., Vol. 163 – 164, 2003, pp. 19–24.10.1016/S0257-8972(02)00585-6 ↗
23. F. D. Richardson, J. H. E. Jeffes, J. Iron Steel Inst., Vol. 160, 1948, pp. 261–70.
24. A. Akhtar, M.S. Hook, and R.C. Reed: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 3001–17.10.1007/s11661-005-0073-8 ↗
25. S. Chevalier, A. Galerie, O. Heintz, R. Chassagnon, and A. Crisci, Mat. Sci. Forum, Vol. 595 - 598, 2008, pp. 915-22.10.4028/www.scientific.net/MSF.595-598.915 ↗
26. H. E. Evans, Int. Mat. Rev., Vol. 40, 1995, pp. 1–40.10.1179/imr.1995.40.1.1 ↗
27. T. J. Nidjam, W. Sloof, Acta Mat., Vol. 56, 2008, pp. 4972–83.10.1016/j.actamat.2008.06.010 ↗
28. K. Fujiwara, Z. Horita, Acta Mat., Vol. 50, 2002, pp. 1571–79.10.1016/S1359-6454(02)00018-6 ↗
29. C. E. Campbell, Acta Mat., Vol. 56, 2008, pp. 4277–90.10.1016/j.actamat.2008.04.061 ↗
30. J.-O. Andersson, T. Helander, L. Hoglund, P.F. Shi, and B. Sundman, CALPHAD, Vol. 26, 2002, pp. 273–312. (TTNI8 database: http://www.thermocalc.com/).10.1016/S0364-5916(02)00037-8 ↗
31. C.M.F. Rae, M.S. Hook, R.C. Reed, Mat. Sci. Eng. A, 396 (2005) 231-39.10.1016/j.msea.2005.01.005 ↗
32. W.S. Walston, J.C. Schaeffer, and W.H. Murphy: in Superalloys 1996, R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, and T.M. Pollock, eds., TMS, Warrendale, PA, 1996, pp. 9–18.10.7449/1996/Superalloys_1996_9_18 ↗
33. J. D. Nystrom, T. M. Pollock, W. H. Murphy, A. Garg, Met. Mat. Trans. A, Vol. 28A, 1997, pp. 2443–52.10.1007/s11661-997-0001-1 ↗
34. L. Bencze, D. D. Raj, D. Kath, W. A. Oates, L. Singheiser, K. Hilpert, Met. Mat. Trans. B, Vol. 35B, 2004, pp. 867–76.10.1007/s11663-004-0081-x ↗