Determination of the β Solvus Temperature of the Aluminum Alloy 5083
Source abstract
Abstract
A metallographic method was used to determine the solvus temperature of β phase in 5083 aluminum alloy. For a more accurate investigation, experiments were carried out from two directions. Consequently, the first reported actual solvus temperature of the Mg-rich phase in the alloy was determined to be 562.5 ± 1.5 K (289.5 ± 1.5 °C), which was 50 K (50 °C) higher than that of the commonly accepted value of the alloy 5083 deduced from the binary phase diagram. A new Cu-bearing phase in the alloy was also first identified metallographically with scanning electron microscopy and its implications in determining the β solvus temperature were discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. ASTM B 928/B 928M-07. “Standard Specification for High Magnesium Aluminum-Alloy Sheet and Plate for Marine Service and Similar Environments”, 2007.
2. E.H. Hollingsworth and H.Y. Hunsicker: in Metals Handbook, vol. 13, J.R. Davis, ed., ASM, Metals Park, OH, 1978, p. 583.
3. A.W. Thompson, Mater. Sci. Eng., 1980, vol. 43, pp. 41-46.10.1016/0025-5416(80)90205-0 ↗
4. J.R. Pickens, J.R. Gordon, and J.A.S. Green, Metall. Trans. A, 1983, vol. 14A, pp. 925-930.10.1007/BF02644298 ↗
5. R.H. Jones, V.Y. Gertsman, J.S. Vetrano, and C.F. Windisch Jr., Scripta Mater., 2004, vol. 50, pp. 1355-1359.10.1016/j.scriptamat.2004.01.038 ↗
6. R.H. Jones, J.S. Vetrano, and C.F. Windisch Jr., Corrosion, 2004, vol. 60, pp. 1144-1154.10.5006/1.3299228 ↗
7. R.H. Jones, JOM., 2003, vol. 55, pp. 42-46.10.1007/s11837-003-0225-5 ↗
8. R.H. Jones, D.R. Baer, M. J. Danielson, and J.S. Vetrano, Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1699-1711.10.1007/s11661-001-0148-0 ↗
9. D.R. Baer, C.F. Windisch, M.H. Engelhard, M.J. Danielson, R.H. Jones, and J.S. Vetrano, J. Vac. Sci. Technol. A, 2000, vol. 18, pp. 131-136.10.1116/1.582129 ↗
10. J.L. Searles, P.I. Gouma, and R.G. Buchheit, Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2859-2867.10.1007/s11661-001-1036-3 ↗
11. J.C. Chang, and T.H. Chuang, Metall. Mater. Trans. A, 1999, vol. 30A, pp. 3191-3199.10.1007/s11661-999-0229-z ↗
12. A.J. Davenport, Y.Yuan, R.Ambat, B.J. Connolly, M. Strangwood, A. Afseth, and G. Scamans, Mater. Sci. Forum, 2006, vol. 519-521, pp. 641-646.10.4028/www.scientific.net/MSF.519-521.641 ↗
13. R. Ambat, and E.S. Dwarakadasa, B. Mater. Sci., 1996, vol. 19, pp. 103-114.10.1007/BF02744792 ↗
14. M. Hansen, and K. Anderko: Constitution of binary alloys, 2nd ed., McGraw-Hill Book Co., New York, 1958, p. 105.
15. J.L. Murray, Bull. Alloy Phase Diagr., 1982, vol. 3, pp. 60-74.10.1007/BF02873413 ↗
16. N. Saunders, CALPHAD., 1990, vol. 14, pp. 61-70.10.1016/0364-5916(90)90040-7 ↗
17. Y. Zuo, and Y.A. Chang, CALPHAD., 1993, vol. 17, pp. 161-174.10.1016/0364-5916(93)90017-6 ↗
18. H. Okamoto, J. Phase Equilibria, 1998, vol. 19, pp. 598-599.10.1361/105497198770341815 ↗
19. Y. Zhong, M. Yang, and Z.K. Liu, CALPHAD., 2005, vol. 29, pp. 303-311.10.1016/j.calphad.2005.08.004 ↗
20. M.T. Perez-Prado, G. Gonzalez-Doncel, O.A. Ruano, and T.R. McNelley, Acta Mater., 2001, vol. 49, pp. 2259-2268.10.1016/S1359-6454(01)00128-8 ↗
21. ASTM G 67-04. “Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5xxx Series Aluminum Alloys by Mass Loss after Exposure to Nitric Acid (NAMLT Test)”, 2004.
22. R.Z. Valiev, and T.G. Langdon, Prog. Mater. Sci., 2006, vol. 51, pp. 881-981.10.1016/j.pmatsci.2006.02.003 ↗
23. Y.K. Yang, and T.R. Allen, Mater. Charact., 2013, vol. 80, pp. 76-85.10.1016/j.matchar.2013.03.014 ↗
24. F.N. Rhines: Phase Diagrams in Metallurgy, p. 290, McGraw- Hill Book Co., New York, 1956.
25. F. Li, D. Xiang, Y. Qin, R.B. Pond Jr., and K. Slusarski, Ultrasonics, 2011, vol. 51, pp. 561-570.10.1016/j.ultras.2010.12.009 ↗
26. M. Popović, and E. Romhanji: J. Mater. Process. Tech., 2002, vol. 125-126, pp. 275-280.10.1016/S0924-0136(02)00398-9 ↗
27. R.M. Cleveland, A.K. Ghosh, and J.R. Bradley, Mater. Sci. Eng. A, 2003, vol. 351, pp. 228-236.10.1016/S0921-5093(02)00848-1 ↗
28. ASTM B 918/B 918M-09. “Standard Practice for Heat Treatment of Wrought Aluminum Alloys”, 2009.
29. ANSI H35.1/H35.1(M)-2009: American National Standard Alloy and Temper Designation Systems for Aluminum, Secretariat, The Aluminum Association, Inc., Washington, D.C, Approved April 7, 2009.
30. L.F. Mondolfo: Aluminium Alloys: Structure and Properties, Butterworth Group, London, 1976, p. 529.10.1016/B978-0-408-70932-3.50229-1 ↗
31. S.L. Lee, and S.T. Wu, Metall. Trans. A, 1987, vol. 18A, pp. 1353-1357.10.1007/BF02646649 ↗
32. J.S. Vetrano, S.M. Bruemmer, L.M. Pawlowski, and I.M. Robertson, Mater. Sci. Eng. A, 1997, vol. 238, pp. 101-107.10.1016/S0921-5093(97)00445-0 ↗
33. P. Ratchev, B. Verlinden, and P. Van Houtte, Acta Metall. Mater., 1995, vol. 43, pp. 621-629.10.1016/0956-7151(94)00261-F ↗
34. R. Goswami, G. Spanos, P.S. Pao, R.L. Holtz, Mater. Sci. Eng. A, 2010, vol. 527, pp. 1089-1095.10.1016/j.msea.2009.10.007 ↗
35. R. Goswami, G. Spanos, P.S. Pao, and R.L. Holtz, Metall. Mater. Trans. A, 2011, vol. 42A, pp. 348-355.10.1007/s11661-010-0262-y ↗
36. Y. Zhu, D.A. Cullen, S. Kar, M.L. Free, and L.F. Allard, Metall. Mater. Trans. A, 2012, vol. 43A, pp. 4933-4939.10.1007/s11661-012-1354-7 ↗