Cu-Precipitation Strengthening in Ultrahigh-Strength Carburizing Steels
Source abstract
Abstract
Ultrahigh hardness levels greater than 700 VHN can be obtained in secondary hardening carburizing steels but depend on costly Co alloying additions to maximize hardness achieved through M2C-type carbide precipitation strengthening. This study aims to incorporate nanometer-scale bcc Cu precipitates to both provide strength as well as catalyze M2C nucleation in the absence of or with reduced Co. Cu additions of 1.0 and 3.7 wt pct were investigated, using a series of mechanistic models coupled with thermodynamic computational tools to derive final compositions. Thirty-pound experimental heats were cast of each designed alloy, samples of which were carburized and tempered to determine their hardness response. Characterization revealed the successful incorporation of Cu alloying additions into this family of steels, demonstrating a secondary hardening response even in the absence of Co. Matrix strength levels were close to those predicted by design models; however, all four alloys demonstrated a hardness deficit of approximately 200 VHN at the carburized surface, suggesting recalibration of the M2C precipitation strengthening model may be required in these alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Y. Murakami: Metal Fatigue: Effects of Small Defects and Nonmetallic Inclusions, Elsevier, Oxford, U.K., 2002.
2. J.P. Wise: Systems Design of Advanced Gear Steels, Northwestern University, Evanston, IL, 1998.
3. G.R. Speich, D.S. Dabkowski, and L.F. Porter: Metall. Trans., 1973, vol. 4, pp. 303–15.10.1007/BF02649630 ↗
4. S. Spooner, H.J. Rack, and D. Kalish: Metall. Trans., 1971, vol. 2, pp. 2306–08.10.1007/BF02917576 ↗
5. A.F. Edneral, O.P. Zhukov, M.A. Kablukov, B.M. Mogutnov, and M.D. Perkas: Fiz. Met. Metalloved, 1973, vol. 36, pp. 727–34.
6. V. Pierron-Bohnes, M.C. Cadeville, and G. Parette: J. Phys. F. Met. Phys., 1985, vol. 15, pp. 1441–48.10.1088/0305-4608/15/7/005 ↗
7. S.S.G. Banadkouki, D. Yu, and D.P. Dunne: ISIJ Int., 1996, vol. 36, pp. 61–67.10.2355/isijinternational.36.61 ↗
8. D.P. Dunne, S.S. Ghasemi, and D. Yu: ISIJ Int., 1996, vol. 36, pp. 324–33.10.2355/isijinternational.36.324 ↗
9. S.K. Dhua, D. Mukerjee, and D.S. Sarma: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2259–70.10.1007/s11661-001-0201-z ↗
10. K.C. Russell and L.M. Brown: Acta Metall., 1972, vol. 20, pp. 969–74.10.1016/0001-6160(72)90091-0 ↗
11. K. Osamura, H. Okuda, S. Ochiai, M. Takashima, K. Asano, M. Furusaka, K. Kishida, and F. Kurosawa: ISIJ Int., 1994, vol. 34, pp. 359–65.10.2355/isijinternational.34.359 ↗
12. M. Charleux, F. Livet, F. Bley, F. Louchet, and Y. Brechet: Phil. Mag. A, 1996, vol. 73, pp. 883–97.10.1080/01418619608243694 ↗
13. A. Deschamps, M. Militzer, and W.J. Poole: ISIJ Int., 2001, vol. 41, pp. 196–205.10.2355/isijinternational.41.196 ↗
14. I. Holzer and E. Kozeschnik: Mater. Sci. Eng. A-Struct., 2010, vol. 527, pp. 3546–51.10.1016/j.msea.2010.02.032 ↗
15. G.M. Worrall, J.T. Buswell, C.A. English, M.G. Hetherington, and G.D.W. Smith: J. Nucl. Mater., 1987, vol. 148, pp. 107–14.10.1016/0022-3115(87)90525-3 ↗
16. P.J. Othen, M.L. Jenkins, G.D.W. Smith, and W.J. Phythian: Phil. Mag. Lett., 1991, vol. 64, pp. 383–91.10.1080/09500839108215121 ↗
17. N. Maruyama, M. Sugiyama, T. Hara, and H. Tamehiro: Mater. T. JIM, 1999, vol. 40, pp. 268–77.10.2320/matertrans1989.40.268 ↗
18. G.R. Speich and R.A. Oriani: Trans. TMS-AIME, 1965, vol. 233, pp. 623–31.
19. D. Isheim, R.P. Kolli, M.E. Fine, and D.N. Seidman: Scripta Mater., 2006, vol. 55, pp. 35–40.10.1016/j.scriptamat.2006.02.040 ↗
20. R.P. Kolli and D.N. Seidman: Acta Mater., 2008, vol. 56, pp. 2073–88.10.1016/j.actamat.2007.12.044 ↗
21. A. Saha: Systems Design of Transformation Toughened Blast-Resistant Naval Hull Steels, Northwestern University, Evanston, IL, 2004.
22. A. Takahashi and M. Iino: ISIJ Int., 1996, vol. 36, pp. 241–45.10.2355/isijinternational.36.241 ↗
23. M. Mujahid, A.K. Lis, C.I. Garcia, and A.J. DeArdo: J. Mater. Eng. Perform., 1998, vol. 7, pp. 247–57.10.1361/105994998770347981 ↗
24. G.C. Hwang, S. Lee, J.Y. Yoo, and W.Y. Choo: Mater. Sci. Eng. A-Struct., 1998, vol. 252, pp. 256–68.10.1016/S0921-5093(98)00670-4 ↗
25. B.S. Ku and J. Yu: Scripta Mater., 2001, vol. 45, pp. 205–11.10.1016/S1359-6462(01)01019-3 ↗
26. M. Hattestrand and H.O. Andren: Mater. Sci. Eng. A-Struct., 2001, vol. 318, pp. 94–101.10.1016/S0921-5093(01)01304-1 ↗
27. K. Stiller, M. Hattestrand, and F. Danoix: Acta Mater., 1998, vol. 46, pp. 6063–73.10.1016/S1359-6454(98)00267-5 ↗
28. K. Hono, D.H. Ping, M. Ohnuma, and H. Onodera: Acta Mater., 1999, vol. 47, pp. 997–1006.10.1016/S1359-6454(98)00392-9 ↗
29. T. Ohkubo, H. Kai, D.H. Ping, K. Hono, and Y. Hirotsu: Scripta Mater., 2001, vol. 44, pp. 971–76.10.1016/S1359-6462(00)00689-8 ↗
30. G.B. Olson: J. Comp.-Aided Mater., 2000, vol. 7, pp., 143–44.10.1023/A:1011895123830 ↗
31. G.B. Olson: Science, 1997, vol. 277, pp. 1237–42.10.1126/science.277.5330.1237 ↗
32. G.L. Krasko and G.B. Olson: Sagamore Army Materials Research Conf. 34, G.B. Olson, M. Azrin, and E.S. Wright, eds., Lake George, NY, 1987.
33. B. Mintz, R. Abushosha, and D.N. Crowther: Mater. Sci. Tech. Ser., 1995, vol. 11, pp. 474–81.10.1179/026708395790165156 ↗
34. B. Sundman, B. Jansson, and J.O. Andersson: CALPHAD, 1985, vol. 9, pp. 153–90.10.1016/0364-5916(85)90021-5 ↗
35. B. Sundman and J. Agren: J. Phys. Chem. Solids, 1981, vol. 42, pp. 297–301.10.1016/0022-3697(81)90144-X ↗
36. M. Hillert, B. Jansson, B. Sundman, and J. Agren: Metall. Trans. A, 1985, vol. 16A, pp. 261–66.10.1007/BF02816052 ↗
37. G. Ghosh and G.B. Olson: Acta Metall. Mater., 1994, vol. 42, pp. 3361–70.10.1016/0956-7151(94)90468-5 ↗
38. J.O. Andersson and J. Agren: J. Appl. Phys., 1992, vol. 72, pp. 1350–55.10.1063/1.351745 ↗
39. S.R. Goodman, S.S. Brenner, and J.R. Low: Metall. Trans., 1973, vol. 4, pp. 2363–69.10.1007/BF02669376 ↗
40. C.R. Hutchinson, M. Goune, and A. Redjaimia: Acta Mater., 2007, vol. 55, pp. 213–23.10.1016/j.actamat.2006.07.028 ↗