journal article·2013-08

Solid-State Transformation of Iron-Rich Intermetallic Phases in Al-Cu 206 Cast Alloys During Solution Heat Treatment

K. Liu, X. Cao, X.-G. Chen

Publisher page

Abstract

The solid-state transformation of the iron-rich intermetallic phases in Al-Cu 206 cast alloys during the solution heat treatment was studied by using Scanning Electron Microscope (SEM), Electron Back Scattered Diffraction (EBSD), Differential Scanning Calorimeter (DSC), and Transmission Electron Microscope (TEM). At a normal solution treatment temperature of 793 K (520 °C), no visible variation is observed for the β-Fe phase solidified from the Al alloy melt. With increasing soaking time, however, the Chinese script α-Fe becomes unstable and progressively transforms into platelet β-Fe, termed as solid-state-transformed (STed) β-Fe to distinguish it from the β-Fe directly solidified from the Al alloy melt. The STed β-Fe preferentially nucleates on the α-Fe and then grows from the α-Fe/Al interface into α-Fe and/or Al matrix with a much higher growth rate in the α-Fe. The incomplete solid-state transformation from α-Fe into STed β-Fe leads to the fragmentation of the α-Fe. The formation of the STed β-Fe with increasing size and volume fraction after longer soaking time can deteriorate the tensile properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. A. Couture: Int. Cast Met. J., 1981, Vol. 6, pp. 9-17.
2. C. J. Tseng, S. L. Lee, S. C. Tsai and C. J. Cheng: J. Mater. Res., 2002, Vol. 17, pp. 2243-50.10.1557/JMR.2002.0330 ↗
3. J. Y. Hwang, H. W. Doty and M. J. Kaufman: Mater. Sci. Eng., A, 2008, Vol. 488, pp. 496-504.10.1016/j.msea.2007.12.026 ↗
4. H. K. Kamga, D. Larouche, M. Bournane and A. Rahem: Int. J. Cast Met. Res., 2012, Vol. 25, pp. 15-25.10.1179/1743133610Y.0000000012 ↗
5. A. Eshaghi, H. M. Ghasemi and J. Rassizadehghani: Materials & Design, 2011, Vol. 32, pp. 1520-25.10.1016/j.matdes.2010.10.014 ↗
6. A. Griger, V. Stefaniay, E. Kovacs-Csetenyi and T. Turmezey, Publ by Trans Tech Publ, Balatonfured, Hung, 1990, pp. 17-30.
7. L. Murgás, Z. Homonnay, S. Nagy and A. Vertes: Metall. Trans. A, 1988, Vol. 19, pp. 259-64.10.1007/BF02652534 ↗
8. I. R. Hughes and H. Jones: J. Mater. Sci., 1977, Vol. 12, pp. 323-33.10.1007/BF00566274 ↗
9. Y. J. Li and L. Arnberg: Acta Mater., 2004, Vol. 52, pp. 2945-52.10.1016/j.actamat.2004.02.041 ↗
10. D. T. L. Alexander and A. L. Greer: Acta Materialia, 2002, Vol. 50, pp. 2571-83.10.1016/S1359-6454(02)00085-X ↗
11. N. A. Belov, A. A. Aksenov and D. G. Eskin, Iron in aluminum alloys: impurity and alloying element, Taylor & Francis, London, 2002.10.1201/9781482265019 ↗
12. J. Y. Yao and J. A. Taylor: J. Alloys Compd., 2012, Vol. 519, pp. 60-66.10.1016/j.jallcom.2011.12.047 ↗
13. E. Sjölander and S. Seifeddine: Mater. Des., 2010, Vol. 31, Supplement 1, pp. S44-S49.10.1016/j.matdes.2009.10.035 ↗
14. E. Cerri, E. Evangelista, S. Spigarelli, P. Cavaliere and F. DeRiccardis: Mater. Sci. Eng., A, 2000, vol. 284, pp. 254–60.10.1016/S0921-5093(00)00748-6 ↗
15. X. Cao and J. Campbell: Mater. Trans. JIM, 2006, vol. 47, pp. 1303–12.10.2320/matertrans.47.1303 ↗
16. K. Liu, X. Cao and X. G. Chen: Metall. Mater. Trans. A, 2011, Vol. 42, pp. 2004-16.10.1007/s11661-010-0578-7 ↗
17. A. Griger, V. Stefaniay, A. Lendval and T. Turmezey: Aluminum, 1989, Vol. 10, pp. 1049-56.
18. G. Gustafsson, T. Thorvaldssons and G. L. Dunlop: Metall. Trans. A, 1986, Vol. 17 A, pp. 45-52.10.1007/BF02644441 ↗
19. L. A. Narayanan, F. H. Samuel and J. E. Gruzleski: Metall. Mater. Trans. A, 1995, Vol. 26, pp. 2161-74.10.1007/BF02670687 ↗
20. H. Baker, Properties and selection: nonferrous alloys and pure metals, American Society for Metals, Metals Park, Ohio, 1979.
21. G. K. Sigworth and J. Fred Major: Light Metals, Minerals, Metals & Materials Soc (TMS), San Antonio, TX, 2006, pp. 795-99.
22. H. K. Kamga, D. Larouche, M. Bournane and A. Rahem: Metall. Mater. Trans. A, 2010, Vol. 41, pp. 2844–55.10.1007/s11661-010-0293-4 ↗
23. C.J. Tseng, S.L. Lee, T.F. Wu and J.C. Lin: Mater. Trans. JIM, 2000, vol. 41, pp. 708–13.10.2320/matertrans1989.41.708 ↗
24. K. Liu, X. Cao, and X. G. Chen: Metall. Mater. Trans. B, 2012, Vol. 43B, pp. 1231-40.10.1007/s11663-012-9694-7 ↗
25. K. Liu, X. Cao and X. G. Chen: Metall. Mater. Trans. A, 2012, Vol. 43, pp. 1097-101.10.1007/s11661-011-1004-5 ↗
26. K. Liu, X. Cao and X. G. Chen: J. Mater. Sci., 2012, Vol. 47, pp. 4290-98.10.1007/s10853-012-6279-4 ↗
27. X. Fan, D. Jiang, Q. Meng and L. Zhong: Mater. Lett., 2006, Vol. 60, pp. 1475-79.10.1016/j.matlet.2005.11.049 ↗
28. K. Liu, X. Cao, and X. G. Chen: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 682–95.10.1007/s11661-012-1419-7 ↗
29. American Society for Testing Materials: ASTM Standards on Light Metals and Alloys. Aluminum and Aluminum Alloys, Cast and Wrought; Magnesium and Magnesium Alloys, Cast and Wrought; Methods of Testing Light Metals, American Society for Testing Materials, Philadelphia, 1959.
30. K. Liu, X. Cao and X. G. Chen: Light Metal – Advances in Materials and Processes, Met. Soc, Vancouver, BC, Canada, 2010, pp. 113-20.
31. M. Kral: Scripta Mater., 2004, Vol. 51, pp. 215-19.10.1016/j.scriptamat.2004.04.015 ↗
32. V. S. Zolotorevsky, N. A. Belov and M. V. Glazoff, Casting aluminum alloys, Elsevier Science, Oxford, 2007.
33. Z. G. An and W. M. Mao: Trans. Mater. Heat Treat., 2010, Vol. 31, pp. 45-50.
34. Y. Du, Y.A. Chang, B. Huang, W. Gong, Z. Jin, H. Xu, Z. Yuan, Y. Liu, Y. He and F.Y. Xie: Mater. Sci. Eng., A, 2003, vol. 363, pp. 140–51.10.1016/S0921-5093(03)00624-5 ↗