Microstructure and Phase Evolution in Laser Cladding of Ni/Cu/Al Multilayer on Magnesium Substrates
Source abstract
Abstract
A multilayer coating of Ni/Cu/Al was fabricated on magnesium substrates using laser cladding. The solidification behavior and the phase evolution of the compositionally graded coating were studied. The results of the X-ray diffraction (XRD) analysis together with the metallographic study showed that a series of phase evolutions had occurred along the gradient (Mg) → (Mg) + Al12Mg17 → (Mg) + Q + λ2 → λ1 → λ1 + γ1 → γ1 + (Cu) + λ1 → (Cu) + λ1 → (Cu) → (CuNi) → (Ni). The rapid solidification condition had suppressed the invariant reactions that existed in the ternary Mg-Al-Cu alloy system. As a result, many of the predicted Al-rich brittle intermetallic compounds, which are detrimental to the performance of the coating, were not produced. The solidification path during the laser cladding of the Al and Cu layers was determined and the various phases, as predicted by the corresponding phase diagram, agreed well with the experimental results. Finally, the primary arm spacing (PAS) and the solidification morphology of the dendrites in the Cu and Ni layers were analyzed in relation to the solidification conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · High Entropy Alloys Studies · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. G.S. Cole: in Magnesium Technology 2007, R.S. Beals, A.A. Luo, N.R. Neelameggham, and M.O. Pekguleryuz, eds., TMS, Warrendale, PA, 2007, pp. 35–40.
2. H. Dieringa, J. Bohlen, N. Hort, D. Letzig, and K. Ulrich Kainer: in Magnesium Technology 2007, R.S. Beals, A.A. Luo, N.R. Neelameggham, M.O. Pekguleryuz, eds., TMS, Warrendale, PA, 2007, pp. 3–8.
3. J.E. Gray and B. Luan: J. Alloys Compd., 2002, vol. 336, pp. 88–113.10.1016/S0925-8388(01)01899-0 ↗
4. R. Subramanian, S. Sircar, and J. Mazumder: J. Mater. Sci., 1991, vol. 26, pp. 951–56.10.1007/BF00576771 ↗
5. A.A. Wang, S. Sircar, and J. Mazumder: J Mater. Sci., 1993, vol. 28, pp. 5113–22.10.1007/BF00570050 ↗
6. R. Galun, A. Weisheit, and B.L. Mordike: J. Laser Appl., 1996, vol. 8, pp. 299–305.10.2351/1.4745436 ↗
7. J.D. Majumdar, T. Maiwald, R. Galun, and B.L. Mordike: Lasers Eng., 2002, vol. 12, pp. 147–69.10.1080/0898150021000039275 ↗
8. T.M. Yue and T. Li: Mater. Trans., 2007, vol. 48, pp. 1064–69.10.2320/matertrans.48.1064 ↗
9. Y.T. Pei and J. Th.M.De Hosson: Acta Mater., 2000, vol. 48, pp. 2617–24.10.1016/S1359-6454(00)00065-3 ↗
10. X. Lin, T.M. Yue, H.O. Yang, and W.D. Huang: Acta Mater., 2006, vol. 54, pp. 1901–15.10.1016/j.actamat.2005.12.019 ↗
11. T.M. Yue and T. Li: Surf. Coat. Technol., 2008, vol. 202, pp. 3043–49.10.1016/j.surfcoat.2007.11.007 ↗
12. T.M. Yue, A.H. Wang, and H.C. Man: Scripta Mater., 1999, vol. 40, pp. 303–11.10.1016/S1359-6462(98)00416-3 ↗
13. S. Ignat, P. Sallamand, D. Grevey, and M. Lambertin: Appl. Surf. Sci., 2004, vol. 225, pp. 124–34.10.1016/j.apsusc.2003.09.043 ↗
14. X. Lin, T.M. Yue, H.O. Yang, and W.D. Huang: Mater. Sci. Eng., A, 2005, vol. 391, pp. 325–36.10.1016/j.msea.2004.08.072 ↗
15. JCPDS PDF-2 Database, Standard Card No. 00-007-0258, International Centre for Diffraction Data, Newton Square, PA, release 2004.
16. G. Effenberg and S. Ilyenko: Landolt-Börnstein—Group IV Physical Chemistry, Springer, Berlin, 2005, vol. 11A2, pp. 47–78.
17. J. De Wilde, E. Nagels, F. Lemoisson, and L. Froyen: Mater. Sci. Eng., A, 2005, vols. 413–414, pp. 514–20.10.1016/j.msea.2005.08.171 ↗
18. W. Kurz and D.J. Fisher: Fundamentals of Solidification, Trans Tech Publications, Stafa-Zurich, Switzerland, 2005, pp. 65–69.
19. T.M. Yue, Y.P. Su, and H.O. Yang: Mater. Lett., 2007, vol. 61, pp. 209–12.10.1016/j.matlet.2006.04.033 ↗
20. N. Saunders: J. Jpn. Inst. Light Met., 2001, vol. 51, pp. 141–50.
21. B.B. Wei, G.C. Yang, and Y.H. Zhou: Acta Metall. Mater., 1991, vol. 39, pp. 1249–58.10.1016/0956-7151(91)90212-J ↗
22. V.J. Laria and A.H. Heuer: Scripta Metall. Mater., 1991, vol. 25, pp. 2803–08.10.1016/0956-716X(91)90160-3 ↗
23. R. Trivedi and W. Kurz: Acta Metall. Mater., 1994, vol. 42, pp. 15–23.10.1016/0956-7151(94)90044-2 ↗
24. S. Yang, W.D. Huang, W.J. Liu, M.L. Zhong, and Y.H. Zhou: Acta Mater., 2002, vol. 50, pp. 315–25.10.1016/S1359-6454(01)00340-8 ↗
25. J. Wesley Cox: in Handbook of Hard Coatings, R.F. Bunshah, ed., Noyes Publications, New York, NY, 2001, pp. 411–57.
26. A. Leyland and A. Matthews: Wear, 2000, vol. 246, pp. 1–11.10.1016/S0043-1648(00)00488-9 ↗
27. W.Y. Ni, Y.T. Cheng, M.J. Lukitsch, A.M. Weiner, L.C. Lev, and D.S. Grummon: Appl. Phys. Lett., 2004, vol. 85, pp. 4028–30.10.1063/1.1811377 ↗
28. W.F. Gale and T.C. Totemeier: Smithells Metals Reference Book, 8th ed., Elsevier Butterworth-Heinemann, Amsterdam, 2004, pp. 15-2–15-6.