journal article·2020-06

The Effect of Second Tempering on Hydrogen Embrittlement of Ultra-High-Strength Steel

Zheng Wang, Bo Kan, Juanping Xu, Jinxu Li

Publisher page

Abstract

The objective of the present study is to enhance the resistance of hydrogen embrittlement (HE) via second tempering at 250 °C for 30, 60 and 120 minutes. Although second tempering results in a higher saturated hydrogen content for the second tempering specimens during a slow strain rate test (SSRT), it effectively reduces HE susceptibility. As the second tempering time increases, dislocation density decreases. In contrast, the size of the cementite and MoyCx precipitates increase slightly. The density of MoyCx precipitates increases, whereas the density of cementite remains approximately the same as the second tempering time increases. Regarding second tempering specimens, the volume fraction’s increase in MoyCx precipitates, which acts as a hydrogen trap with high binding energy, plays an important role in reducing the HE susceptibility, and the decrease in dislocation density can also improve HE resistance. In addition, the growth of the interface of the cementite and matrix disperses more hydrogen, which could enhance HE resistance. The result also reveals that the cementite and matrix interface is a type of low-binding-energy hydrogen trap without plastic deformation, whereas the strain interface with interfacial dislocations is a type of high binding energy hydrogen trap under plastic deformation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. 1. T. Doshida, M. Nakamura, H. Saito, T. Sawada and K. Takai: Acta Mater., 2013, vol. 61, pp. 7755-66.10.1016/j.actamat.2013.09.015 ↗
2. 2. A. Nagao, T. Ito and T. Obinata: JFE Tech. Rep., 2008, vol. 11, pp. 13-8.
3. 3. X. Zhu, W. Li, H.S. Zhao and X.J. Jin: Int. J. Hydrogen Energy, 2013, vol. 38, pp. 10694-703.10.1016/j.ijhydene.2013.05.113 ↗
4. 4. Y. Momotani, A. Shibata, D. Terada and N. Tsuji: Mater. Today: Proc., 2015, vol. 2, pp. S735-8.10.1016/j.matpr.2015.07.387 ↗
5. S.K. Ji, H.L. You, D.L. Lee, K.T. Park and S.L. Chong (2009) Mater. Sci. Eng. A, vol. 505, pp. 105-10.10.1016/j.msea.2008.11.040 ↗
6. 6. T. Michler and M.P. Balogh: Int. J. Hydrogen Energy, 2010, vol. 35, pp. 9746-54.10.1016/j.ijhydene.2010.06.071 ↗
7. 7. M.Q. Wang, E. Akiyama and K. Tsuzaki: Corros. Sci., 2007, vol. 49, pp. 4081-97.10.1016/j.corsci.2007.03.038 ↗
8. 8. K. Takai: Isij Int., 2012, vol. 52, pp. 167.10.2355/isijinternational.52.167 ↗
9. 9. M. Dadfarnia, A. Nagao, S. Wang, M.L. Martin, B.P. Somerday and P. Sofronis: Int. J. Fract., 2015, vol. 196, pp. 1-21.10.1007/s10704-015-0068-4 ↗
10. 10. A. Nagao, M.L. Martin, M. Dadfarnia, P. Sofronis and I.M. Robertson: Acta Mater., 2014, vol. 74, pp. 244-54.10.1016/j.actamat.2014.04.051 ↗
11. W.J. Hui, H.X. Zhang, Y.J. Zhang, X.L. Zhao and C.W. Shao (2016) Mater. Sci. Eng. A, vol. 674, pp. 615-25.10.1016/j.msea.2016.08.028 ↗
12. Y. Sakamoto, K. Takao and S. Tokumitsu (1976) Mater. Trans. JIM, vol. 17, pp. 743-8.10.2320/matertrans1960.17.743 ↗
13. 13. A. Nagao, K. Hayashi, K. Oi and S. Mitao: Isij Int., 2012, vol. 52, pp. 213-21.10.2355/isijinternational.52.213 ↗
14. 14. H. Fuchigami, H. Minami and M. Nagumo: Philos. Mag. Lett., 2006, vol. 86, pp. 21-9.10.1080/09500830500482316 ↗
15. 15. L.W. Tsay, H.L. Lu and C. Chen: Corros. Sci., 2008, vol. 50, pp. 2506-11.10.1016/j.corsci.2008.06.044 ↗
16. 16. H. Iwaoka, M. Arita and Z. Horita: Acta Mater., 2016, vol. 107, pp. 168-77.10.1016/j.actamat.2016.01.069 ↗
17. 17. P. Castaño-Rivera, N.S.D Vincentis, R.E. Bolmaro and P. Bruzzoni: Procedia Mater. Sci., 2015, vol. 8, pp. 1031-8.10.1016/j.mspro.2015.04.165 ↗
18. 18. C. Park, N. Kang, M. Kim and S. Liu: Mater. Lett., 2019, vol. 235, pp. 193-6.10.1016/j.matlet.2018.10.049 ↗
19. 19. T. Depover and K. Verbeken: Int. J. Hydrogen Energy, 2018, vol. 43, pp. 3050-61.10.1016/j.ijhydene.2017.12.109 ↗
20. 20. M. Dadfarnia, M.L. Martin, A. Nagao, P. Sofronis and I.M. Robertson: J. Mech. Phys. Solids, 2015, vol. 78, pp. 511-25.10.1016/j.jmps.2015.03.002 ↗
21. 21. M. Nagumo and K. Takai: Acta Mater., 2019, vol. 165, pp.722-33.10.1016/j.actamat.2018.12.013 ↗
22. 22. K. Takai and R. Watanuki: Isij Int., 2003, vol. 43, pp. 520-6.10.2355/isijinternational.43.520 ↗
23. 23. W.M. Robertson and A.W. Thompson: Metall. Trans. A, 1980, vol. 11, pp. 553-7.10.1007/BF02670691 ↗
24. 24. F.G. Wei, T. Hara, T. Tsuchida and K. Tsuzaki: Trans. Iron Steel Inst. Jpn., 2003, vol. 43, pp. 539-47.10.2355/isijinternational.43.539 ↗
25. 25. F.G. Wei and K. Tsuzaki: Scr. Mater., 2005, vol. 52, pp. 467-72.10.1016/j.scriptamat.2004.11.008 ↗
26. 26. G.K. Williamson and W.H. Hall: Acta Metall., 1953, vol. 1, pp. 22-31.10.1016/0001-6160(53)90006-6 ↗
27. 27. G.K. Williamson and R.E. Smallman: Philos. Mag., 2012, vol. 1, pp. 34-46.10.1080/14786435608238074 ↗
28. 28. S. Takebayashi, T. Kunieda, N. Yoshinaga, K. Ushioda and S. Ogata: Isij Int., 2010, vol. 50, pp. 875-82.10.2355/isijinternational.50.875 ↗
29. J.L. Yang, F. Huang, Z.H. Guo, Y.H. Rong and N.L. Chen (2016) Mater. Sci. Eng. A, vol. 665, pp. 76-85.10.1016/j.msea.2016.04.025 ↗
30. 30. G.W. Hong and J.Y. Lee: Metall. Trans. A, 1983, vol. 14, pp. 156-8.10.1007/BF02643751 ↗
31. 31. M. Hatano, M. Fujinami, K. Arai, H. Fujii and M. Nagumo: Acta Mater., 2014, vol. 67, pp. 342-53.10.1016/j.actamat.2013.12.039 ↗
32. 32. X. Zhu, W. Li, T.Y. Hsu, S. Zhou, L. Wang and X.J. Jin: Scr. Mater., 2015, vol. 97, pp. 21-4.10.1016/j.scriptamat.2014.10.030 ↗
33. 33. S.H. Yu, S.M. Lee, S. Lee, J.H. Nam, J.S. Lee, C.M. Bae and Y.K. Lee: Acta Mater., 2019, vol. 172, pp. 92-101.10.1016/j.actamat.2019.04.040 ↗
34. 34. Y.F. Jiang, B. Zhang, D.Y. Wang, Y. Zhou, J.Q. Wang, E.H. Han and W. Ke: J. Mater. Sci. Technol., 2019, vol. 35, pp. 1081-7.10.1016/j.jmst.2018.12.019 ↗
35. 35. C. Park, N. Kang, S. Liu, J. Lee, E. Chun and S.J. Yoo: Met. Mater. Int., 2018, vol. 25, pp. 584-93.10.1007/s12540-018-00221-y ↗