journal article·2019-08-15Open access

Tempering Reactions and Elemental Redistribution During Tempering of Martensitic Stainless Steels

Qiuliang Huang, Mengji Yao, Ilana Timokhina, Christian Schimpf, Horst Biermann, Olena Volkova, Bruno C. De Cooman, Javad Mola

Abstract

Tempering reactions in the martensite phase of Fe-13Cr-0.47C (mass pct) stainless steel and its Si- and Mn-added modifications were studied by correlative dilatometry and magnetic measurements. Tempering for 5 minutes was performed at sequentially higher temperatures up to 923 K (650 °C). Classical tempering reactions including the segregation of C atoms at defects, precipitation of M3C and Cr-rich carbides, and austenite decomposition were clearly identified. The formation of M3C carbides was partially and entirely suppressed by Mn and Si additions, respectively. Compared to low-alloy steels, the decomposition of retained austenite in stainless steels was delayed to temperatures above 823 K (550 °C). The latter occurred concurrently with the formation of Cr-rich carbides in the martensite. In addition, non-classical tempering reactions such as the partial dissolution of C clusters at temperatures above 573 K (300 °C) and the short-range diffusion of substitutional elements including Cr and Mn to C clusters and M3C carbides in the temperature range of 673 K to 823 K (400 °C to 550 °C) were identified based on the associated increase in the magnetization.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. G.R. Speich and W.C. Leslie: Metall. Trans., 1972, vol. 3, pp. 1043–54.10.1007/BF02642436 ↗
2. M. Kusunoki and S. Nagakura: J. Appl. Crystallogr., 1981, vol. 14, pp. 329–336.10.1107/S0021889881009485 ↗
3. S. Murphy and A. Whiteman: Metall. Trans., 1970, vol. 1, pp. 843–848.10.1007/BF02811763 ↗
4. R. Dabrowski and J. Pacyna: Arch. Mater. Sci. Eng., 2007, vol. 28, p. 585–88.
5. C. Servant and G. Cizeron: Mater. Sci. Eng. A, 1989, vol. 117, pp. 175–89.10.1016/0921-5093(89)90099-3 ↗
6. Y. Ohmori and I. Tamura: Metall. Trans. A, 1992, vol. 23, pp. 2737–51.10.1007/BF02651753 ↗
7. R.C. Thomson: Mater. Charact., 2000, vol. 44, pp. 219–33.10.1016/S1044-5803(99)00061-3 ↗
8. L. Chang and G.D.W. Smith: J. Phys. Colloq., 1984, vol. 45, pp. C9–397.
9. P.C. Chen and P.G. Winchell: Metall. Trans. A, 1980, vol. 11, pp. 1333–1339.10.1007/BF02653487 ↗
10. P.V. Morra, A.J. Böttger, and E.J. Mittemeijer: J. Therm. Anal. Calorim., 2001, vol. 64, pp. 905–14.10.1023/A:1011514727891 ↗
11. T. Waterschoot, K. Verbeken, and B.C.D. Cooman: ISIJ Int., 2006, vol. 46, pp. 138–46.10.2355/isijinternational.46.138 ↗
12. S.S.M. Tavares, D. Fruchart, S. Miraglia, and D. Laborie: J. Alloys Compd., 2000, vol. 312, pp. 307–14.10.1016/S0925-8388(00)01149-X ↗
13. B.A. Apaev: Phase Magnetic Analysis, Moscow: Matellurgiya, 1976.
14. R. Rahimi, R. Ritzenhoff, and H. Biermann, and J. Mola: in High Nitrogen Steels, 2014, 2014.
15. J. Mola, G. Luan, D. Brochnow, O. Volkova, and J. Wu: Metall. Mater. Trans. A, 2017, vol. 48, pp. 5805–12.10.1007/s11661-017-4374-5 ↗
16. L. Cheng, C.M. Brakman, B.M. Korevaar, and E.J. Mittemeijer: Metall. Trans. A, 1988, vol. 19, pp. 2415–26.10.1007/BF02645469 ↗
17. H.K.D.H. Bhadeshia and S.R. Honeycombe: in Steels (Third Edition), H.K.D.H. Bhadeshia and S.R. Honeycombe, eds., Butterworth-Heinemann, Oxford, 2006, pp. 183–208.10.1016/B978-075068084-4/50011-X ↗
18. A. Kwiatkowski da Silva, G. Leyson, M. Kuzmina, D. Ponge, M. Herbig, S. Sandlöbes, B. Gault, J. Neugebauer, and D. Raabe: Acta Mater., 2017, vol. 124, pp. 305–15.10.1016/j.actamat.2016.11.013 ↗
19. A.J. Ardell and P. Bellon: Curr. Opin. Solid State Mater. Sci., 2016, vol. 20, pp. 115–39.10.1016/j.cossms.2015.11.001 ↗
20. M.K. Miller: J. Mater. Sci., 2006, vol. 41, pp. 7808–13.10.1007/s10853-006-0518-5 ↗
21. C. Zhu, X.Y. Xiong, A. Cerezo, R. Hardwicke, G. Krauss, and G.D.W. Smith: Ultramicroscopy, 2007, vol. 107, pp. 808–12.10.1016/j.ultramic.2007.02.033 ↗
22. C. Lerchbacher, S. Zinner, and H. Leitner: Metall. Mater. Trans. A, 2012, vol. 43, pp. 4989–98.10.1007/s11661-012-1358-3 ↗
23. A.J. Clarke, M.K. Miller, R.D. Field, D.R. Coughlin, P.J. Gibbs, K.D. Clarke, D.J. Alexander, K.A. Powers, P.A. Papin, and G. Krauss: Acta Mater., 2014, vol. 77, pp. 17–27.10.1016/j.actamat.2014.05.032 ↗
24. M. Maalekian: The Effects of Alloying Elements on Steels (I), Christian Doppler Laboratory for Early Stages of Precipitation, 2007.
25. Q. Huang, C. Schröder, H. Biermann, O. Volkova, and J. Mola: Steel Res. Int., 2016, vol. 87, pp. 1082–94.10.1002/srin.201500472 ↗
26. M.K. Miller: Atom Probe Tomography: Analysis at the Atomic Level, Springer US, 2000.10.1007/978-1-4615-4281-0 ↗
27. J. Mola, D. Chae, and B.C.D. Cooman: Metall. Mater. Trans. A, 2010, vol. 41, pp. 1429–40.10.1007/s11661-010-0206-6 ↗
28. R.A. Mesquita and H.J. Kestenbach: Solid State Phenom., 2011, vol. 172–174, pp. 414–9.10.4028/www.scientific.net/SSP.172-174.414 ↗
29. I. Seki and K. Nagata: ISIJ Int., 2005, vol. 45, pp. 1789–94.10.2355/isijinternational.45.1789 ↗
30. J. Mola, G. Luan, Q. Huang, C. Schimpf, and D. Rafaja: Materialia, 2018, vol. 2, pp. 138–47.10.1016/j.mtla.2018.07.013 ↗
31. A. Bénéteau, E. Aeby-Gautier, G. Geandier, P. Weisbecker, A. Redjaïmia, and B. Appolaire: Acta Mater., 2014, vol. 81, pp. 30–40.10.1016/j.actamat.2014.07.050 ↗
32. F. Tariq and R.A. Baloch: in ICASE2013: Proceedings of the Third International Conference on Aerospace Science & Engineering, Institute of Space Technology, Pakistan, 2013.
33. C.S. Roberts: Trans AIME, 1953, vol. 197, pp. 203–204.
34. D. Jain, D. Isheim, and D.N. Seidman: Metall. Mater. Trans. A, 2017, vol. 48, pp. 3205–19.10.1007/s11661-017-4129-3 ↗
35. L. Yuan, D. Ponge, J. Wittig, P. Choi, J.A. Jiménez, and D. Raabe: Acta Mater., 2012, vol. 60, pp. 2790–804.10.1016/j.actamat.2012.01.045 ↗
36. L. Morsdorf, C.C. Tasan, D. Ponge, and D. Raabe: Acta Mater., 2015, vol. 95, pp. 366–77.10.1016/j.actamat.2015.05.023 ↗
37. A.W. Cochardt, G. Schoek, and H. Wiedersich: Acta Metall., 1955, vol. 3, pp. 533–37.10.1016/0001-6160(55)90111-5 ↗
38. A. Vieweg, E. Povoden-Karadeniz, G. Ressel, P. Prevedel, T. Wojcik, F. Mendez-Martin, A. Stark, J. Keckes, and E. Kozeschnik: Mater. Des., 2017, vol. 136, pp. 214–22.10.1016/j.matdes.2017.09.065 ↗
39. J. Wilde, A. Cerezo, and G.D.W. Smith: Scr. Mater., 2000, vol. 43, pp. 39–48.10.1016/S1359-6462(00)00361-4 ↗
40. M. Jung, S.-J. Lee, and Y.-K. Lee: Metall. Mater. Trans. A, 2009, vol. 40, pp. 551–9.10.1007/s11661-008-9756-2 ↗
41. L.J.E. Hofer: Nature of the Carbides of Iron, U.S. Department of the Interior, Bureau of Mines, Washington, D. C., 1966.
42. J. Crangle and G.M. Goodman: Proc. R. Soc. Lond. Ser. Math. Phys. Sci., 1971, vol. 321, pp. 477–91.10.1098/rspa.1971.0044 ↗
43. N.I. Medvedeva, I.R. Shein, M.A. Konyaeva, and A.L. Ivanovskii: Phys. Met. Metallogr., 2008, vol. 105, pp. 568–73.10.1134/S0031918X08060069 ↗
44. A. Kagawa and T. Okamoto: Trans. Jpn. Inst. Met., 1979, vol. 20, pp. 659–66.10.2320/matertrans1960.20.659 ↗
45. C.G. Shull and M.K. Wilkinson: Phys. Rev., 1955, vol. 97, pp. 304–10.10.1103/PhysRev.97.304 ↗
46. A.T. Aldred: Phys. Rev. B, 1976, vol. 14, pp. 219–27.10.1103/PhysRevB.14.219 ↗
47. T. Shigematsu: J. Phys. Soc. Jpn., 1974, vol. 37, pp. 940–5.10.1143/JPSJ.37.940 ↗
48. G.P. Huffman, P.R. Errington, and R.M. Fisher: Phys. Status Solidi B, 1967, vol. 22, pp. 473–81.10.1002/pssb.19670220219 ↗
49. J.G. Speer, A.M. Streicher, D.K. Matlock, F. Rizzo, and G. Krauss: in Austenite Formation and Decomposition, 2003, pp. 505–22.
50. F.G. Caballero, M.K. Miller, S.S. Babu, and C. Garcia-Mateo: Acta Mater., 2007, vol. 55, pp. 381–90.10.1016/j.actamat.2006.08.033 ↗
51. F.G. Caballero, M.K. Miller, C. Garcia-Mateo, C. Capdevila, and S.S. Babu: Acta Mater., 2008, vol. 56, pp. 188–99.10.1016/j.actamat.2007.09.018 ↗
52. Q. Huang, B.C.D. Cooman, H. Biermann, and J. Mola: Metall. Mater. Trans. A, 2016, vol. 47, pp. 1947–59.10.1007/s11661-016-3382-1 ↗
53. H. Yamauchi, H. Watanabe, Y. Suzuki, and H. Saito: J. Phys. Soc. Jpn., 1974, vol. 36, pp. 971–4.10.1143/JPSJ.36.971 ↗
54. S. Reeh, D. Music, M. Ekholm, I.A. Abrikosov, and J.M. Schneider: Phys. Rev. B. 2013, vol. 87, art no. 224103.10.1103/PhysRevB.87.224103 ↗
55. P. Gondi and R. Montanari: Phys. Status Solidi A, 1992, vol. 131, pp. 465–80.10.1002/pssa.2211310221 ↗
56. N.I. Medvedeva, D.C. Van Aken, and J.E. Medvedeva: J. Phys. Condens. Matter, 2011, vol. 23, p. 326003.10.1088/0953-8984/23/32/326003 ↗
57. S.S. Babu, K. Hono, and T. Sakurai: Metall. Mater. Trans. A, 1994, vol. 25, pp. 499–508.10.1007/BF02651591 ↗
58. S.S. Babu, K. Hono, and T. Sakurai: Appl. Surf. Sci., 1993, vol. 67, pp. 321–7.10.1016/0169-4332(93)90333-7 ↗
59. R.C. Thomson and M.K. Miller: Acta Mater., 1998, vol. 46, pp. 2203–13.10.1016/S1359-6454(97)00420-5 ↗
60. A. Inoue and T. Masumoto: Metall. Trans. A, 1980, vol. 11, pp. 739–47.10.1007/BF02661203 ↗
61. J.P. Materkowski and G. Krauss: Metall. Trans. A, 1979, vol. 10, pp. 1643–51.10.1007/BF02811697 ↗
62. A.J. Clarke, J.G. Speer, D.K. Matlock, F.C. Rizzo, D.V. Edmonds, and M.J. Santofimia: Scr. Mater., 2009, vol. 61, pp. 149–52.10.1016/j.scriptamat.2009.03.021 ↗
63. K.O. Findley, J. Hidalgo, R.M. Huizenga, and M.J. Santofimia: Mater. Des., 2017, vol. 117, pp. 248–56.10.1016/j.matdes.2016.12.065 ↗
64. J.G. Speer, E.D. Moor, and A.J. Clarke: Mater. Sci. Technol., 2015, vol. 31, pp. 3–9.10.1179/1743284714Y.0000000628 ↗
65. Q. Huang, O. Volkova, B.D. Cooman, H. Biermann, and J. Mola: IOP Conf. Ser. Mater. Sci. Eng., 2018, vol. 373, p. 012001.10.1088/1757-899X/373/1/012001 ↗
66. T. Tsuchiyama, J. Tobata, T. Tao, N. Nakada, and S. Takaki: Mater. Sci. Eng. A, 2012, vol. 532, pp. 585–92.10.1016/j.msea.2011.10.125 ↗