journal article·2019-01

Catalytic Preparation of Si3N4-Bonded SiC Refractories and Their High-Temperature Properties

Feng Liang, Wanguo Zhao, Lilin Lu, Haijun Zhang, Yubao Bi, Jun Zhang, Jianghao Liu, Shaowei Zhang

Publisher page

Abstract

Effects of Cr2O3 nanoparticles (NPs) on the catalytic nitridation of Si powders were investigated, and the results showed that the Cr2O3 NP catalysts enhanced the nitridation of Si powders and promoted the formation of Si3N4 whiskers. The complete conversion of Si was achieved at [1473 K (1200 °C)] for 3 hours with the addition of 3 wt pct Cr2O3 NPs. First-principle calculations suggested that the electron transfer from Cr2O3 to N2 molecules facilitates the Si nitridation. Moreover, Si3N4-bonded SiC refractories were also prepared using in-situ formed Cr2O3 NPs as catalysts, and the hot modulus of rupture at [1673 K (1400 °C)] of as-prepared refractories was about three times higher than that of samples without catalysts; the corrosion resistance against molten cryolite of the former was remarkably lower than that of the latter. The improvement was attributed to the catalytic effects of Cr2O3 NPs for in-situ formation of a fund of Si3N4 whiskers, which formed a network structure in the samples.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · MXene and MAX Phase Materials · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. E. Wang: J. Am. Ceram. Soc., 2012, vol. 95, pp. 730–38.10.1111/j.1551-2916.2011.04973.x ↗
2. Y. Jiang, M. Chen, L. Feng, J. Chen, and B. Zhao: Ceram. Int., 2018, vol. 44, pp. 718–22.10.1016/j.ceramint.2017.09.235 ↗
3. H.L. Hu, Y.P. Zeng, K.H. Zuo, Y.F. Xia, D.X. Yao, J. Günster, J.G. Heinrich, and S. Li: J. Eur. Ceram. Soc., 2015, vol. 35, pp. 3781–87.10.1016/j.jeurceramsoc.2015.06.028 ↗
4. G.P. Jiang and J.F. Yang: J. Am. Ceram. Soc., 2018, vol. 101, pp. 520–24.10.1111/jace.15265 ↗
5. H. Klemm: J. Am. Ceram. Soc., 2010, vol. 93, pp. 1501–22.10.1111/j.1551-2916.2010.03839.x ↗
6. H. Hyuga, K. Yoshida, N. Kondo, H. Kita, J. Sugai, H. Okano, and J. Tsuchida: Ceram. Int., 2009, vol. 35, pp. 1927–32.10.1016/j.ceramint.2008.10.019 ↗
7. J.F. Chen, N. Li, Y.W. Wei, B.Q. Han, and W. Yan: J. Eur. Ceram. Soc., 2017, vol. 37, pp. 1821–29.10.1016/j.jeurceramsoc.2016.12.005 ↗
8. J.T. Huang, Z.H. Huang, S.W. Zhang, M.H. Fang, and Y.G. Liu: J. Nanomater., 2014, vol. 2014, pp. 1–6.
9. L. Han, L. Huang, F. Li, J. Wang, Y. Pei, Y. Zeng, Q. Jia, H. Zhang, and S. Zhang: Ceram. Int., 2018, vol. 44, pp. 11088–11093.10.1016/j.ceramint.2018.03.096 ↗
10. J. Liu, Y. Gu, F. Li, L. Lu, H. Zhang, and S. Zhang: J. Eur. Ceram. Soc., 2017, vol. 37, pp. 4467–74.10.1016/j.jeurceramsoc.2017.07.012 ↗
11. W. Zhao, H. Zhang, J. Liu, X. Deng, Y. Bi, and S. Zhang: J. Ceram. Soc. Jpn., 2017, vol. 125, pp. 623–27.10.2109/jcersj2.17047 ↗
12. M. Long, Y. Li, X. Jin, G. Yao, J. Sun, and R.V. Kumar: J. Am. Ceram. Soc., 2018, vol. 101, pp. 4350–56.10.1111/jace.15552 ↗
13. H.N. Kim, J.W. Ko, J.M. Kim, Y.J. Park, J.W. Lee, H.D. Kim, S.S. Baek, S.J. Lee, and I.S. Seo: Ceram. Int., 2016, vol. 42, pp. 7072–79.10.1016/j.ceramint.2016.01.095 ↗
14. S. Goel, A. Kumar, J.K. Quamara, and J. Kumar: Adv. Sci. Lett., 2014, vol. 20, pp. 1562–66.10.1166/asl.2014.5576 ↗
15. R.F.K. Gunnewiek, C.F. Mendes, and R.H.G.A. Kiminami: Mater. Lett., 2014, vol. 129, pp. 54–56.10.1016/j.matlet.2014.05.026 ↗
16. S.U. Rehman, F.K. Butt, B.U. Haq, S. AlFaify, W.S. Khan, and C. Li: Sol. Energy, 2018, vol. 169, pp. 648–57.10.1016/j.solener.2018.05.006 ↗
17. S. Marutheeswaran and E.D. Jemmis: J. Phys. Chem. C, 2018, vol. 122, pp. 7945–50.10.1021/acs.jpcc.7b12603 ↗
18. Y. Zhou, W. Sun, W. Chu, J. Zheng, X. Gao, X. Zhou, and Y. Xue: Appl. Surf. Sci., 2018, vol. 435, pp. 521–28.10.1016/j.apsusc.2017.11.138 ↗
19. H. Badem, A. Basturk, A. Caliskan, and M.E. Yuksel: Neurocomputing, 2017, vol. 266, pp. 506–26.10.1016/j.neucom.2017.05.061 ↗
20. Y. Gu, L. Lu, H. Zhang, Y. Cao, F. Li, and S. Zhang: J. Am. Ceram. Soc., 2015, vol. 98, pp. 1762–68.10.1111/jace.13554 ↗
21. F. Liang, L. Lu, L. Tian, F. Li, H. Zhang, and S. Zhang: Sci. Rep., 2016, vol. 6, p. 31559-68.10.1038/srep31559 ↗
22. Y.W. Kim, Y.S. Chun, T. Nishimura, M. Mitomo, and Y.H. Lee: Acta. Mater., 2007, vol. 55, pp. 727–36.10.1016/j.actamat.2006.08.059 ↗