In Vitro Biodegradation and Mechanical Properties of Mg-Zn Alloy and Mg-Zn-Hydroxyapatite Composite Produced by Mechanical Alloying for Potential Application in Bone Repair
Source abstract
Abstract
A biodegradable Mg-6.5 wt pct Zn (Mg-Zn) alloy and Mg-6.5 wt pct Zn reinforced with 10 wt pct hydroxyapatite (HA) composite were prepared by mechanical milling. In vitro biodegradation activity as a function of immersion time was performed in Hank’s balanced salt solution (HBSS). The dissolution of Mg ions (Mg2+) decreased from 75.74 µg/ml of pure Mg to 59.24 µg/ml and 46.88 µg/ml corresponding to the Mg-Zn alloy and Mg-Zn/HA composite, respectively. This finding indicates the progressive effect of HA followed by the Zn addition in decelerating the degradation rate of Mg. More positive corrosion potential of Mg-6.5 wt pct Zn alloy (− 1.5015 V) and Mg-Zn/10 wt pct HA composite (− 1.4647 V) than that of pure Mg (− 1.6972 V) suggested that the Mg-Zn/10 wt pct HA composite exhibited the highest corrosion resistance in the bioenvironment. The compressive strength values after 7 days of immersion in HBSS of the Mg-Zn alloy and Mg-Zn/HA composite are 230.64 and 278.46 MPa, respectively, and these are considerably higher compared to the compressive strength of the cortical bone (100 to 230 MPa).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Hydrogen Storage and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. F. Witte, V. Kaese, H. Haferkamp, E. Switzer, A.M. Lindenberg, C.J. Wirth and H. Windhagen: Biomater, 2005, vol. 26, pp. 3557-3563.10.1016/j.biomaterials.2004.09.049 ↗
2. M.K. Datta, D.T. Chou, D. Hong, P. Saha, S.J.Chung, B. Lee, A. Sirinterlikci, M. Ramanathan, A. Roy and P.N. Kumta: Mater. Sci. Eng. B, 2011, vol. 176, pp. 1637-1643.10.1016/j.mseb.2011.08.008 ↗
3. I. Stulikova and B. Smola: Mater. Charact, 2010, vol. 61: 952-958.10.1016/j.matchar.2010.06.004 ↗
4. M. Nemeca, V. Gartnerova and A. Jager: Mater. Charact, 2016, vol. 119, pp. 129-136.10.1016/j.matchar.2016.07.016 ↗
5. R. Zeng, D. Wolfgang, W. Frank, H. Nobert and B. Carsten: Adv. Biomater, 2008, vol. 10, pp. B3-B14.
6. S. Zhang, X. Zhang, C. Zhao, J. Li, Y. Song, C. Xie, H. Tao, Y. Zhang, Y. He, Y. Jiang and Y. Bian: Acta Biomater, 2010, vol. 6, pp. 626-640.10.1016/j.actbio.2009.06.028 ↗
7. H.R. Bakhsheshi-Rad, M.H. Idris, M.R. Abdul-Kadir, A. Ourdjini, M. Medraj, M. Daroonparvar and E. Hamzah: Mater. Des, 2014, vol. 53, pp. 283-292.10.1016/j.matdes.2013.06.055 ↗
8. M. Gupta and N.M.L. Sharon: Magnesium, Magnesium Alloys, and Magnesium Composites. 3rd ed., John Wiley & Sons, New York, 2011, pp. 257-283.10.1002/9780470905098 ↗
9. E.M. Salleh, Z. Hussain, S. Ramakrishnan and B.K. Dhindaw: Metall. Mater. Trans. A, 2017, vol. 48, pp. 2519–2528.10.1007/s11661-017-4028-7 ↗
10. G.L. Song GL: Corros. Sci, 2007, vol. 49, pp.1696-1701.10.1016/j.corsci.2007.01.001 ↗
11. X. Gu, Y. Zheng, Y. Cheng, S. Zhong and T. Xi: Biomater, 2009, vol. 30, pp. 484-498.10.1016/j.biomaterials.2008.10.021 ↗
12. S. Shadanbaz and G. J. Dias: Acta Biomater, 2012, vol. 8, pp. 20–30.10.1016/j.actbio.2011.10.016 ↗
13. C. F. Dunne, G. K. Levy, O. Hakimi, E. Aghion, B. Twomey and K. T.Stanton: Surf. Coat. Technol, 2016, vol. 289, pp. 37-44.10.1016/j.surfcoat.2016.01.045 ↗
14. Y.W.Song, D.Y.Shan and E.H. Han: Mater. Lett, 2008, vol. 62, pp. 3276-3279.10.1016/j.matlet.2008.02.048 ↗
15. L. Xu, F. Pan, G. Yu, L.Yang, E. Zhang and K. Yang: Biomater., 2009, vol. 30, pp. 1512- 1523.10.1016/j.biomaterials.2008.12.001 ↗
16. M. Tomozawa and S. Hiromoto: Appl. Surf. Sci, 2011, vol. 257, pp. 8253– 8257.10.1016/j.apsusc.2011.04.087 ↗
17. A.A. Nasser, A.M. Barakat, J.K. Lim: Ceram. Int, 2013, vol. 39, pp. 183-195.10.1016/j.ceramint.2012.06.008 ↗
18. W. Li, S. Guan, J. Chen, J. Hu, S. Chen, L. Wang and S. Zhu: Mater. Charact, 2011, vol. 62, pp. 1158-1165.10.1016/j.matchar.2011.07.005 ↗
19. L.M. Plum, L. Rink and H. Haase H: Int. J. Environ. Res. Public Health, 2010, vol. 7, pp. 1342-1365.10.3390/ijerph7041342 ↗
20. D. Vojtech, J. Kubasek, J. Serak and P. Novak: Acta Biomater, 2011, vol. 7, pp. 3515-3522.10.1016/j.actbio.2011.05.008 ↗
21. C. Castellani, R.A. Lindtner, P. Hausbrandt, E.Tschegg, S.E. Stanzl-Tschegg, G. Zanoni, S. Beck S and W.E. Weinberg: Acta Biomater, 2011, vol. 7, pp. 432-440.10.1016/j.actbio.2010.08.020 ↗
22. J. Zhang, J. Guan, C. Zhang, H. Wang, W. Huang, S. Guo, X. Niu, Z. Xie and Y. Wang: Biomed. Mater, 2015, vol. 10, pp. 1-10.
23. N.D. Evans, E. Gentleman, X. Chen, C.J. Roberts, J.M. Polak and M.M. Stevens: Biomater, 2010, vol. 31, pp. 3244-3252.10.1016/j.biomaterials.2010.01.039 ↗
24. F. Anghelina, D. Ungureanu, V. Bratu, I. Popescu and C. Rusanescu: Appl. Surf. Sci, 2013, vol. 285, pp. 65-71.10.1016/j.apsusc.2013.06.102 ↗
25. K.A. Khalil: IOP Conference Series: Materials Science and Engineering. IOP Publishing, 2012; 012031.10.1088/1757-899X/40/1/012031 ↗
26. A.K. Khanra, H.C. Jung, K.S. Hong and K.S. Shin: Mater. Sci. Eng. A, 2010, vol. 527, pp. 6283-6288.10.1016/j.msea.2010.06.031 ↗
27. T. Kraus, S.F. Fischerauer, A.C. Hanzi, P.J. Uggowitzer, J.F. Loffler and A.M. Weinberg: Acta Biomater, 2012, vol. 8, pp. 1230-1238.10.1016/j.actbio.2011.11.008 ↗
28. D. Gopi, P. Bhalaji, S. Ramya and L. Kavitha: J. Ind. Eng. Chem, 2015, vol. 23, pp. 218-227.10.1016/j.jiec.2014.08.019 ↗
29. B. Homayun and A. Afshar: J. Alloys Compd, 2014, vol. 607, pp. 1-10.10.1016/j.jallcom.2014.04.059 ↗
30. N. Hort, Y. Huang, D. Fechner, M. Stormer, C. Blawert, F. Witte, C. Vogt, H. Drucker, R. Willumeit and K. Kainer: Acta Biomater, 2010, vol. 6, pp. 1714-1725.10.1016/j.actbio.2009.09.010 ↗
31. M. Bohner and J. Lemaitre: Biomater, 2009, vol. 30, pp. 2175-2179.10.1016/j.biomaterials.2009.01.008 ↗
32. D.R.Crapper McLachlan: Neurobiology of Aging, 1986, vol. 7, pp. 525-532.10.1016/0197-4580(86)90102-8 ↗
33. Y. Jang, B. Collins, J. Sankar and Y. Yun: Acta Biomater, 2013, vol. 9, pp. 8761-8770.10.1016/j.actbio.2013.03.026 ↗
34. T. Kokubo and H. Takadama: Biomater, 2006, vol. 27, pp. 2907-2915.10.1016/j.biomaterials.2006.01.017 ↗
35. A.C. Fisher-Cripps: Nanoindentation, 2002, vol. 1, pp. 2–16.
36. W.C. Oliver, G.M. Pharr: J. Mater. Res, 2004, vol. 19 pp. 3–20.10.1557/jmr.2004.19.1.3 ↗
37. S. Nag, R. Banerjee and H.L. Fraser: Acta Biomater, 2007, vol. 3, pp. 369-376.10.1016/j.actbio.2006.08.005 ↗
38. G. Wei: Recent Pat. Corros. Sci, 2011, vol. 1, pp. 72-90.10.2174/2210687111101010072 ↗
39. C. Ou, W. Lu, Z. Zhan, P. Huang, P. Yan, B. Yan and M. Chen: Int. J. Electrochem. Sci, 2013, vol. 8, pp. 9518-9530.10.1016/S1452-3981(23)12990-7 ↗
40. R. del Campo, B.Savoini, A.Munoz, M.A.Monge and G.Garces: J. Mech. Behav. Biomed. Mater, 2014, vol. 39, pp. 238-246.10.1016/j.jmbbm.2014.07.014 ↗
41. M. Okada and T. Matsumoto: Jpn. Dent. Sci. Rev, 2015, vol. 51, pp. 85-95.10.1016/j.jdsr.2015.03.004 ↗
42. A.A. Zadpoor: Mater. Sci. Eng. C, 2014, vol. 35, pp. 134-143.10.1016/j.msec.2013.10.026 ↗
43. D. Liu, Y. Ding, T. Guo, X. Qin, C. Guo, S. Yu and S. Lin: Biomed. Mater, 2014, vol. 9, pp. 1-9.
44. E. Gentleman, Y.C. Fredholm, G. Jell, N. Lotfibakhshaiesh, M.D. O’Donnell, R.G. Hill and M.M. Stevens: Biomater, 2010, vol. 31, pp. 3949-3956.10.1016/j.biomaterials.2010.01.121 ↗
45. K. Alvarez and H. Nakajima: Mater, 2009, vol. 2, pp. 790-832.10.3390/ma2030790 ↗