A Simplified Three-Phase Model of Equiaxed Solidification for the Prediction of Microstructure and Macrosegregation in Castings
Source abstract
Abstract
Macrosegregation is a result of the interplay of various transport mechanisms, including natural convection, solidification shrinkage, and grain motion. Experimental observations also indicate the impact of grain morphology, ranging from dendritic to globular, on macrosegregation formation. To avoid the complexity arising due to modeling of an equiaxed dendritic grain, we present the development of a simplified three-phase, multiscale equiaxed dendritic solidification model based on the volume-averaging method, which accounts for the above-mentioned transport phenomena. The validity of the model is assessed by comparing it with the full three-phase model without simplifications. It is then applied to qualitatively analyze the impact of grain morphology on macrosegregation formation in an industrial scale direct chill cast aluminum alloy ingot.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. R. Nadella, D.G. Eskin, Q. Du, and L. Katgerman: Prog. Mater. Sci., 2008, vol. 53, pp. 421–80.10.1016/j.pmatsci.2007.10.001 ↗
2. M. Rappaz and V. Voller: Metall. Trans. A, 1990, vol. 21, pp. 749–53.10.1007/BF02671947 ↗
3. W.D. Bennon and F.P. Incropera: Int. J. Heat Mass Transf., 1987, vol. 30, pp. 2161–70.10.1016/0017-9310(87)90094-9 ↗
4. V.R. Voller, A.D. Brent, and C. Prakash: Int. J. Heat Mass Transf., 1989, vol. 32, pp. 1719–31.10.1016/0017-9310(89)90054-9 ↗
5. A. V. Reddy and N.C. Beckermann: Metall. Mater. Trans. B, 1997, vol. 28, pp. 479–89.10.1007/s11663-997-0115-2 ↗
6. T. Finn, M.G. Chu, and W.D. Bennon: Micro/marco scale phenomena in solidification. ASME, New York1992, pp. 17–26.
7. Q. Du, D.G. Eskin, and L. Katgerman: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2007, vol. 38, pp. 180–9.10.1007/s11661-006-9042-0 ↗
8. J. Ni and C. Beckermann: Metall. Trans. B—Process Metall., 1991, vol. 22, pp. 349–61.10.1007/BF02651234 ↗
9. A. V. Reddy and C. Beckermann: Mater. Process. Comput. Age II, 1995, pp. 89–102.
10. L. Zhang, D.G. Eskin, A. Miroux, T. Subroto, and L. Katgerman: IOP Conf. Ser. Mater. Sci. Eng., 2012, vol. 33, pp. 1–8.
11. L. Zhang, D.G. Eskin, A. Miroux, T. Subroto, and L. Katgerman: Metall. Mater. Trans. B. 2012, 43: 1565-1573.10.1007/s11663-012-9711-x ↗
12. J. Li, M. Wu, A. Ludwig, and A. Kharicha: Int. J. Heat Mass Transf., 2014, vol. 72, pp. 668–79.10.1016/j.ijheatmasstransfer.2013.08.079 ↗
13. M. Rappaz and P. Thévoz: Acta Metall., 1987, vol. 35, pp. 1487–97.10.1016/0001-6160(87)90094-0 ↗
14. M. Rappaz and P.H. Thévoz: Acta Metall., 1987, vol. 35, pp. 2929–33.10.1016/0001-6160(87)90292-6 ↗
15. P. Thévoz, J.L. Desbiolles, and M. Rappaz: Metall. Trans. A, 1989, vol. 20, pp. 311–22.10.1007/BF02670257 ↗
16. C.Y. Wang and C. Beckermann: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2754–64.10.1007/BF02652369 ↗
17. C.Y. Wang and C. Beckermann: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2765–83.10.1007/BF02652370 ↗
18. C.Y. Wang and C. Beckermann: Metall. Trans. A, 1993, vol. 24, pp. 2787–802.10.1007/BF02659502 ↗
19. M. Wu and A. Ludwig: Acta Mater., 2009, vol. 57, pp. 5621–5631.10.1016/j.actamat.2009.07.056 ↗
20. C.J. Vreeman and F.P. Incropera: Int. J. Heat Mass Transf., 2000, vol. 43, pp. 677–86.10.1016/S0017-9310(99)00174-X ↗
21. C.J. Vreeman and F.P. Incropera: Int. J. Heat Mass Transf., 2000, vol. 43, pp. 687–704.10.1016/S0017-9310(99)00175-1 ↗
22. M. Založnik and H. Combeau: Comput. Mater. Sci., 2010, vol. 48, pp. 1–10.10.1016/j.commatsci.2009.04.036 ↗
23. M. Založnik, A. Kumar, H. Combeau, M. Bedel, P. Jarry, and E. Waz: Adv. Eng. Mater., 2011, vol. 13, pp. 570–80.10.1002/adem.201000341 ↗
24. B. Appolaire, H. Combeau, and G. Lesoult: Mater. Sci. Eng. A, 2008, vol. 487, pp. 33–45.10.1016/j.msea.2007.11.030 ↗
25. M. Wu, A. Fjeld, and A. Ludwig: Comput. Mater. Sci., 2010, vol. 50, pp. 32–42.10.1016/j.commatsci.2010.07.005 ↗
26. C.Y. Wang, S. Ahuja, C. Beckermann, and H.C. de Groh III: Metall. Mater. Trans. B, 1995, vol. 26, pp. 111–9.10.1007/BF02648984 ↗
27. H. Combeau, M. Založnik, S. Hans, and P.E. Richy: Metall. Mater. Trans. B, 2009, vol. 40, pp. 289–304.10.1007/s11663-008-9178-y ↗
28. Ø. Nielsen, B. Appolaire, H. Combeau, and A. Mo: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2001, vol. 32, pp. 2049–60.10.1007/s11661-001-0017-x ↗
29. M. Rappaz and W.J. Boettinger: Acta Mater., 1999, vol. 47, pp. 3205–19.10.1016/S1359-6454(99)00188-3 ↗
30. K.O. Tveito, M. Bedel, M. Založnik, H. Combeau, and M. M’Hamdi: IOP Conf. Ser. Mater. Sci. Eng., 2012, vol. 27, p. 12040.10.1088/1757-899X/27/1/012040 ↗
31. A.L. Greer, A.M. Bunn, A. Tronche, P. V. Evans, and D.J. Bristow: Acta Mater., 2000, vol. 48, pp. 2823–35.10.1016/S1359-6454(00)00094-X ↗
32. A. Tronche: Ph.D. Thesis, University of Cambridge, Cambridge, England, 2000.
33. T.E. Quested: Ph.D. Thesis, University of Cambridge, Cambridge UK, 2004.
34. D.A. Drew: Ann. Rev. Fluid Mech, 1983, vol. 15, pp. 261–91.10.1146/annurev.fl.15.010183.001401 ↗
35. D. Weckman and P. Niessen: Metall. Trans. B, 1982, vol. 13, pp. 593–602.10.1007/BF02650017 ↗
36. M. Založnik, A. Kumar, H. Combeau, M. Bedel, P. Jarry, and E. Waz: Essent. Readings Light Met. Vol. 3, Cast Shop Alum. Prod., 2013, pp. 848–53.10.1002/9781118647783.ch106 ↗
37. M. Založnik and H. Combeau: Model. Cast. Weld. Adv. Solidif. Process. XII, 2009, pp. 165–72.
38. H. Combeau, M. Založnik, and M. Bedel: Jom, 2016, vol. 68, pp. 2198–206.10.1007/s11837-016-1993-z ↗
39. L. Heyvaert, M. Bedel, M. Založnik, and H. Combeau: Metall. Mater. Trans. A, 2017, vol. 48, pp. 4713–34.10.1007/s11661-017-4238-z ↗
40. M. Bedel: Ph.D. Theses Université de Lorraine, Nancy, France, 2010.
41. M. Bedel, L. Heyvaert, M. Založnik, H. Combeau, D. Daloz, and G. Lesoult: IOP Conf. Ser. Mater. Sci. Eng., https://doi.org/10.1088/1757-899x/84/1/012100, 2015.10.1088/1757-899x/84/1/012100 ↗