Effect of Steel Galvanization on the Microstructure and Mechanical Performances of Planar Magnetic Pulse Welds of Aluminum and Steel
Source abstract
Abstract
For the first time, planar joints between pure aluminum and galvanized or uncoated DP450 steel joints have been developed via magnetic pulse welding. Both present a wavy interface. The microstructure of the interfacial zone differs according to the joint. With uncoated steel, the interface is composed of discrete 2.5-µm-thick FeAl3 intermetallic compounds and Fe penetration lamellae, whereas the interface of the pure Al-galvanized steel joint is bilayered and composed of a 10-nm-thick (Al)Zn solid solution and a few micrometers thick aggregate of Al- and Zn-based grains, arranged from the Al side to the Zn coating. Even if the nature of the interfacial zone differs with or without the steel coating, both welds present rather similar maximum tensile forces and ductility in shear lap testing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. G. Liedl, R. Bielak, J. Ivanova, N. Enzinger, G. Figner, J. Bruckner, H. Pasic, M. Pudar, S. Hampel: Phys. Procedia, 2011, vol. 12A, pp. 150-15610.1016/j.phpro.2011.03.019 ↗
2. F. Möller, C. Thomy (2013) Handbook of laser welding technologies. In: S.Katayama (ed.). Laser welding and brazing of dissimilar materials, Woodhead publishing, Cambridge, 2013, pp. 255-27910.1533/9780857098771.2.255 ↗
3. G. Sierra: Etude métallurgique et mécanique de l’assemblage hétérogène accier/aluminium par les procédés laser et TIG, Université Montpellier 2, PhD, 2006
4. E.A. Brandes, G.B. Brook (1992), Smithells Metal Reference Book. Butterworth-Heinemann Ltd, Oxford
5. L.H. Shah, M. Ishak: Mater. Manuf. Processes, 2014, vol. 29, pp. 928-93310.1080/10426914.2014.880461 ↗
6. M.A. Miller, E.W. Mason: Weld. J. 1956, vol. 35(7), pp. 323S-328S
7. T. Murakami, K. Nakata, H. Tong, M. Ushio: ISIJ Int. 2003, vol. 43(10), pp. 1596-160210.2355/isijinternational.43.1596 ↗
8. H.T. Zhang, J.C. Feng, P. He, H. Hackl: Mater. Charact. 2007, vol. 58, pp. 588-59210.1016/j.matchar.2006.07.008 ↗
9. L.A. Jacome, S. Weber, A. Leitner, E. Arenholz, J. Bruckner, H. Hackl, A. R. Pyzalla: Adv. Eng. Mater., 2009, vol. 11(5), pp. 350-35810.1002/adem.200800319 ↗
10. J.L. Song, S.B. Liu, C.L. Yang, C.L. Fan: J. Alloys Compd., 2009, vol. 488(1), pp. 217-22210.1016/j.jallcom.2009.08.084 ↗
11. H. Dong, L. Yang, C. Dong, S. Kou: Mater. Sci. Eng. A, 2010, vol. 527, pp. 7151-715410.1016/j.msea.2010.07.092 ↗
12. H. Zhang, J. Liu: Mater. Sci. Eng. A, 2011, vol. 528, pp. 6179-618510.1016/j.msea.2011.04.039 ↗
13. H. Dong, L. Yang, C. Dong, S. Kou: Mater. Sci. Eng. A, 2012, vol. 534, pp. 424-43510.1016/j.msea.2011.11.090 ↗
14. Y. Su, X. Hua, Y. Wu: Mater. Sci. Eng. A, 2013, vol. 578, pp. 340-34510.1016/j.msea.2013.04.097 ↗
15. R. Cao, G. Yu, J.H. Chen, P.C. Wang: J. Mater. Process. Technol., 2013, vol. 213, pp. 1753-176310.1016/j.jmatprotec.2013.04.004 ↗
16. L. Agudo, D. Eyidi, C.H. Schmaranzer, E. Arenholz, N. Jank, J. Bruckner, A.R. Pyzalla: J. Mater. Sci., 2007, vol. 42, pp. 4205-421410.1007/s10853-006-0644-0 ↗
17. R. Qiu, C. Iwamoto, S. Satonaka: Mater. Charact., 2009, vol. 60(2), pp. 156-15910.1016/j.matchar.2008.07.005 ↗
18. R. Qiu, C. Iwamoto, S. Satonaka: J. Mater. Process. Technol., 2009, vol. 209, pp. 4186-419310.1016/j.jmatprotec.2008.11.003 ↗
19. R. Qiu, S. Satonaka, C. Iwamoto: Mater. Des., 2009, vol. 30, pp. 3686-368910.1016/j.matdes.2009.02.012 ↗
20. R. Qiu, H. Shi, K. Zhang, Y. Tu, C. Iwamoto, S. Satonaka: Mater. Charact., 2010, vol. 61, pp. 684-68810.1016/j.matchar.2010.03.015 ↗
21. W. Zhang, D. Sun, L. Han, Y. Li: Mater. Des., 2015, vol. 85, pp. 461-47010.1016/j.matdes.2015.07.025 ↗
22. X. Sun, E.V. Stephens, M.A. Khaleel, H. Shao, M. Kimchi: Weld. J., 2004, vol 83(7), pp. 188-195
23. M. Yasuyama, K. Ogawa, T. Taka: Weld. Intern., 1996, vol. 10(12), pp. 965-97010.1080/09507119609549121 ↗
24. H. Oikawa, T. Saito, T. Yoshimura, T. Nagase, T. Kiriyama: Weld. Intern., 1996, vol. 10(12), pp. 943-95410.1080/09507119609549119 ↗
25. H. Oikawa, T. Saito: Weld. Intern. 1999, vol. 13(5), pp. 349-35910.1080/09507119909446510 ↗
26. K. Matsugi, Y. Wang, T. Hatayama, O. Yanagisawa, K. Syakagohri: J. Mater. Process. Technol., 2003, vol. 135, pp. 75-8210.1016/S0924-0136(02)01040-3 ↗
27. Z.B. Gang, C.G. Qing, Z.C. Guangl, N.I.J. Qiang: Trans. Nonferrous Metals Soc. China, 2011, vol. 21, pp. 2592-259610.1016/S1003-6326(11)61096-0 ↗
28. A. Grodzinski, J. Senkara, M. Kozlowski: J. Mater. Sci., 1996, vol. 31, pp. 4967-497310.1007/BF00355888 ↗
29. J.H. Han, J.P. Ahn, M.C. Shin: J. Mater. Sci., 2003, vol. 38, pp. 13-1810.1023/A:1021197328946 ↗
30. Y. Li, H. Hashimoto, E. Sukedai, Y. Zhang, Z. Zhang (2000) J. Elect. Microscopy, 49(1), 5-1610.1093/oxfordjournals.jmicro.a023791 ↗
31. V.R. Ryabov, L.B. Pervukhin, G.A. Volferts, V.V. Tsitsilin (1995) Paton welding J., 7(12), 690-693
32. G. Sierra, P. Peyre, F. Deschaux-Beaumec, D. Stuart, G. Fras (2007) Mater. Sci. Eng. A447, 197-20810.1016/j.msea.2006.10.106 ↗
33. N. Cavusoglu, H. Ozden (2013): Weld. J., 14, pp. 32-37
34. K.J. Lee, S. Kumai, T. Arai: Mater. Trans., 2005, vol. 46(8), pp. 1847-185610.2320/matertrans.46.1847 ↗
35. H. Laukant, C. Wallmann, M. Müller, M. Korte, B. Stirn, H.G. Haldenwanger, U. Glatzel: Sci. Technol. Weld. Join., 2005, vol. 10(2), pp. 219-22610.1179/174329305X37051 ↗
36. R. Borrisutthekul, T. Yachi, Y. Miyashita, Y. Mutoh: Mater. Sci. Eng. A, 2007, vol. 467, pp. 108-11310.1016/j.msea.2007.03.049 ↗
37. J. Yang, Y.L. Li, H. Zhang: Trans. Nonferrous Met. Soc. China, 2016, vol. 26, pp. 994-100210.1016/S1003-6326(16)64196-1 ↗
38. S. Meco, G. Pardal, S. Ganguly, R.M. Miranda, L. Quintino, S. Williams: Intern. J. Adv. Manuf. Technol., 2012, vol. 6 https://doi.org/10.1007/s00170-012-4512-610.1007/s00170-012-4512-6 ↗
39. S. Katatyama: Weld. Int. 2004, vol. 18(8), pp. 618-62510.1533/wint.2004.3315 ↗
40. R. Brockmann, K. Dickmann, C. radscheit, E. Schubert, G. Sepold: Weld. Cutti. 1996, vol. 3, pp. E46-E47
41. J. Ding, F. Li, F. Qu, P. Peyre, R. Fabbro: Chinese Optics Lett., 2005, vol. 3(1), pp. 1-4
42. M.J. Rathod, M. Kutsuna: Weld. J., 2004, 83, pp. 16-26
43. M. Kutsuna, H. Ozaki, S. Nakagawa, K. Miyamoto: in Proceedings of the 4th International congress on laser advanced materials processing, Kyoto, 2006.
44. Y. Miyashita, Y. Mutoh, M. Alahori, H. Okumura, I. Nakagawa, X. Jin-Quan: Weld. Intern., 2005, vol. 19(6), pp. 687-69610.1533/wint.2005.3487 ↗
45. A. Mathieu, R. Shabadi, A. Deschamps, M. Suery, S. Matteï, D. Grevey, E. Cicala: Optics Laser Technol., 2007, vol. 39, pp. 652-66110.1016/j.optlastec.2005.08.014 ↗
46. C. Dharmendra, K.P. Rao, J. Wilden, S. Reich: Mater. Sci. Eng. A, 2011, vol. 528, pp. 1497-150310.1016/j.msea.2010.10.050 ↗
47. M. Alexander, M. Simone, V. Jean-Claude: In Laser materials processing conference. Proceeding of ICA-LEO’05, Miami, 2005, pp. 985–91.
48. R. Shabadi, M.Suery, A. Deschamps: Met. Mater. Charact., 2013, vol. 44A, pp. 2672-2682
49. M.J. Zhang, G.Y. Chen, Y. Zhang, K.R. Wu: Mater. Des., 2013, vol. 45, pp. 24-3010.1016/j.matdes.2012.09.023 ↗
50. B.Y.M. Roulin, J.W. Luster, G. Karadeniz, A. Mortensen: Weld. Res., 1999, vol. 78, pp. 151-155
51. L. Peng, L. Yajiang, W. Juan, G. Jishi: Mater. Res. Bull., 2003, vol. 38, pp. 1493-149910.1016/S0025-5408(03)00176-4 ↗
52. F. Vollertsen, C. Thomy: in Proceedings ICALEO, Orlando, 2009, pp. 89–97.10.2351/1.5061661 ↗
53. G.I. Qin, Y.H. Su, S.J. Wang: Trans. Nonferrous Met. Soc. China, 2014, vol. 24, pp. 989-99510.1016/S1003-6326(14)63153-8 ↗
54. J.L. Song, S.B. Lin, C.L. Yang, G.C. Ma, H. Liu: Mater. Sci. Eng. A, 2009, vol. 509, pp. 31-4010.1016/j.msea.2009.02.036 ↗
55. H. Zhang, J. Liu, J. Feng: Trans. Nonferrous Met. Soc. China, 2014, vol. 24(9), pp. 2831-283810.1016/S1003-6326(14)63415-4 ↗
56. G. Zhang, W. Su, J. Zhang, Z. Wei: Metall. Mater. Trans. A, 2011, vol. 42(9), pp. 2850-286110.1007/s11661-011-0677-0 ↗
57. C. van der Rest, P. Jacques, A. Simar: Scripta Mater., 2014, vol. 77, pp. 25-2810.1016/j.scriptamat.2014.01.008 ↗
58. T. Tanaka, T. Morishige, T. Hirata: Scripta Mater., 2009, vol. 61, pp. 756-75910.1016/j.scriptamat.2009.06.022 ↗
59. D.R. Andrews: British Weld. J., 1962, 79(7), pp. 650-658
60. G.A. Bel’Chuk: State of the art of argon-arc welding technology in joining aluminium and aluminium alloys to steel. (Naval Intelligence Support Centre. Washington, DC, 1973).
61. J. Vrenken, C. Goos, T. van der Veldt, W. Braunschweig: Joining in Automotive Engineering, CD-Rom, 2009.
62. J. Yang, Y.L. Li, H. Zhang, W. Guo, Y. Zhou: Mater. Sci. Eng. A, 2015, vol. 645, pp. 323-32710.1016/j.msea.2015.08.036 ↗
63. M.V. Akdeniz, A.O. Mekhrabov: Acta Mater., 1998, vol. 46 (4), pp. 1185-119210.1016/S1359-6454(97)00318-2 ↗
64. P.D. Calderon, D.R. Walmsley, A. Munir: Weld. J., 14, 1985, pp. 104-112
65. S. Fukumoto, H. Tsubakino, K. Okita, M. Aritashi, T. Tomita: Mater. Sci. Technol., 1999, vol. 15, pp. 1080-108610.1179/026708399101506805 ↗
66. S. Fukumoto, H. Tsubakino, K. Okita, M. Aritoshi, T. Tomita: Mater. Sci. Technol., 1998, vol. 14, pp. 333-33810.1179/mst.1998.14.4.333 ↗
67. G. Kawai, K. Ogawa, H. Hochi, H. Tokisue: Weld. Intern., 2000, vol. 14(2), pp. 101-0710.1080/09507110009549147 ↗
68. B.S. Yilbas, A.Z. Sahin, N. Kahraman, A.Z. Al-Garni: J. Mater. Process. Technol., 1995, vol. 49, pp. 431-44310.1016/0924-0136(94)01349-6 ↗
69. K. Kimapong, T. Watanabe: Mater. Trans., 2005, vol. 46(4), pp. 835-84110.2320/matertrans.46.835 ↗
70. W.H. Jiang, R. Kovacevic: J. Eng. Manuf., 2004, vol. 218, pp. 1323-133110.1243/0954405042323612 ↗
71. K. Kimapong, T. Watanabe: Weld. J., 2004, vol. 83, pp. 277-282
72. Y.C. Chen, T. Komazaki, Y.G. Kim, T. Tsumara, K. Nakata: Mater. Chem. Phys., 2008, vol. 111, pp. 375-38010.1016/j.matchemphys.2008.04.038 ↗
73. R.S. Coelho, A. Kostka, S. Sheikhi, J. Dos Santos, A.R. Pyzalla: Adv. Eng. Mater., 2008, vol. 10, pp. 961-97210.1002/adem.200800028 ↗
74. S. Bozzi, A.L. Helbert, T. Baudin, B. Criqui, J.G. Kerbiguet: Mater. Sci. Eng. A, 2010, vol. 527, pp. 4505-450910.1016/j.msea.2010.03.097 ↗
75. H. Springer, A. Kostka, J.F. Dos Santos, D. Raabe: Mater. Sci. Eng. A, 2011, vol. 528, pp. 4630-464210.1016/j.msea.2011.02.057 ↗
76. M. Movahedi, A.H. Kokabi, S.M.S. Reihani, H. Najafi: Procedia Eng., 2011, vol. 10, pp. 3297-330310.1016/j.proeng.2011.04.544 ↗
77. S. Kundu, D. Roy, R. Bhola, D. Bhattacharjee, B. Mishra, S. Chatterjee: Mater. Des., 2013, vol. 50, pp. 370-37510.1016/j.matdes.2013.02.017 ↗
78. Y. Kusuda: Ind. Robot Int. J., 2013, vol. 40, pp. 208-21210.1108/01439911311309889 ↗
79. [79] Z.W. Chen, S. Yazdanian, G. Littlefair: J. Mater. Sci., 2013, vol. 48, pp. 2624-263410.1007/s10853-012-7056-0 ↗
80. M. Ghosh, R.K. Gupta, M.M. Husain: Metall. Mater. Trans. A, 2013, vol. 45, pp. 854-86310.1007/s11661-013-2036-9 ↗
81. M. Mohavedi, A.H. Kokabi, S.M.S. Reihani, W.J. Cheng, C.J. Wang: Mater. Des., 2013, vol. 44, pp. 487-49210.1016/j.matdes.2012.08.028 ↗
82. X. Liu, S. Lan, J. Ni: Mater. Des., 2014, vol. 59, pp. 50-6210.1016/j.matdes.2014.02.003 ↗
83. M. Haghshenas, A. Abdel-Gwad, A.M. Omran, B. Gökçe, S. Sahraemejad, A.P. Gerlich: Mater. Des., 2014, vol. 55, pp. 442-44910.1016/j.matdes.2013.10.013 ↗
84. H. Das, R.N. Ghosh, T.K. Pal: Metall. Mater. Trans. A, 2014, vol. 45, pp. 5098-510610.1007/s11661-014-2424-9 ↗
85. H. Das, S.S. Jana, T.K. Pal, A. De: Sci. Technol. Weld. Join., 2014, vol. 19, pp. 69-7510.1179/1362171813Y.0000000166 ↗
86. K.K. Ramachandran, N. Murugan, S. Shashi-Kumar: Mater. Sci. Eng. A, 2015, vol. 639, pp. 219-23310.1016/j.msea.2015.04.089 ↗
87. C.M. Chen, R. Kovacevic: Intern. J. Mach. Tools Manuf., 2004, vol. 44, pp. 1205-121410.1016/j.ijmachtools.2004.03.011 ↗
88. A. Simar, M.-N. Avettand-Fènoël: Sci. Technol. Weld. Join., 2017, vol. 5, pp. 389-40310.1080/13621718.2016.1251712 ↗
89. M. Girard, B. Huneau, C. Genevois, X. Sauvage, G. Racineux: Sci. Technol. Weld. Join.. 2010, vol. 15, pp. 661-66510.1179/136217110X12720264008475 ↗
90. J. Tsujino, K. Hidai, A. Hasegawa, R. Kanai, H. Matsuura, K. Matsushima, T. Ueoka: Ultrasonics, 2002, vol. 40, pp. 371-37410.1016/S0041-624X(02)00124-5 ↗
91. M.S.A. Nehzad, A.H. Ardakani: Mater. Des., 2009, vol. 30, pp. 1103-110910.1016/j.matdes.2008.06.042 ↗
92. H.D. Manesh, H.S. Shahabi: J. Alloys Compnds., 2009, vol. 476, pp. 292-29910.1016/j.jallcom.2008.08.081 ↗
93. H.D. Manesh, A.K. Taheri: J. Alloys Compnds., 2003, vol. 361, pp. 138-14310.1016/S0925-8388(03)00392-X ↗
94. P. Zhang, Y. Du, S. Xing, L. Zhang, D. Zeng, J. Cui, L. Ba: J. Mater. Sci. Technol., 2002, vol. 18(5), pp. 468-470
95. M.K. Karfoul, G.J. Tatlock, R.T. Murray: J. Mater. Sci., 2007, vol. 42, pp. 5692-569910.1007/s10853-006-0742-z ↗
96. H. Springer, A. Kostka, E.J. Payton, D. Raabe, A. Kaysser-Pyzalla, G. Eggeler: Acta Mater., 2011, vol. 59, pp. 1586-160010.1016/j.actamat.2010.11.023 ↗
97. N. Iwamoto, M. Yoshida, S. Tabata, T. Takeuchi, M. Makino: Trans. Jap. Weld. Res. Intern., 1975, vol. 4(2), pp. 171-174
98. H. Shi, S. Qiao, R. Qiu, X. Zhang, H. Yu: Mater. Manuf. Process., 2012, vol. 27(12), pp. 1366-136910.1080/10426914.2012.663122 ↗
99. J. Luo, W. Chen, G. Fu: J. Mater. Process. Technol., 2014, vol. 214, pp. 3002-301210.1016/j.jmatprotec.2014.07.005 ↗
100. H. Bang, G. Jeon, I. Oh, C. Ro: Mater. Des., 2012, vol. 37, pp. 48-5510.1016/j.matdes.2011.12.018 ↗