journal article·2018-04

Experimental and Numerical Analysis of Microstructures and Stress States of Shot-Peened GH4169 Superalloys

Dianyin Hu, Ye Gao, Fanchao Meng, Jun Song, Rongqiao Wang

Publisher page

Abstract

Combining experiments and finite element analysis (FEA), a systematic study was performed to analyze the microstructural evolution and stress states of shot-peened GH4169 superalloy over a variety of peening intensities and coverages. A dislocation density evolution model was integrated into the representative volume FEA model to quantitatively predict microstructural evolution in the surface layers and compared with experimental results. It was found that surface roughness and through-depth residual stress profile are more sensitive to shot-peening intensity compared to coverage due to the high kinetic energy involved. Moreover, a surface nanocrystallization layer was discovered in the top surface region of GH4169 for all shot-peening conditions. However, the grain refinement was more intensified under high shot-peening coverage, under which enough time was permitted for grain refinement. The grain size gradient predicted by the numerical framework showed good agreement with experimental observations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Surface Treatment and Residual Stress · Erosion and Abrasive Machining · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Z. Zhou, A.S. Gill, D. Qian, S.R. Mannava, K. Langer, Y. Wen, V.K. Vasudevan: Int. J. Impact Eng., 2011, vol. 38 (7), pp. 590–96.10.1016/j.ijimpeng.2011.02.006 ↗
2. Y. Huang, T.G. Langdon: Mater. Sci. Eng. A, 2005, vol. 410–411, pp. 130–33.10.1016/j.msea.2005.08.095 ↗
3. C.M. Kuo, Y.T. Yang, H.Y. Bor, C.N. Wei, C.C. Tai: Mater. Sci. Eng. A, 2009, vol. 510, pp. 289–94.10.1016/j.msea.2008.04.097 ↗
4. G. Chen, Y. Zhang, D. Xu, Y.C. Lin, X. Chen: Mater. Sci. Eng. A, 2016, vol. 655, pp. 175–82.10.1016/j.msea.2015.12.096 ↗
5. D. Cai, W. Zhang, P. Nie, W. Liu, and M. Yao: Mater. Charact., 2007, vol. 58 (3), pp. 220–25.10.1016/j.matchar.2006.04.020 ↗
6. J. Du, X. Lü, and Q. Deng: Rare Metal Mat. Eng., 2014, vol. 43 (8), pp. 1830–34.10.1016/S1875-5372(14)60140-5 ↗
7. S. Azadian, L. Wei, and R. Warren: Mater. Charact., 2004, vol. 53 (1), pp. 7–16.10.1016/j.matchar.2004.07.004 ↗
8. H.Y. Li, Y.H. Kong, G.S. Chen, L.X. Xie, S.G. Zhu, and X. Sheng: Mater. Sci. Eng. A, 2013, vol. 582, pp. 368–73.10.1016/j.msea.2013.06.021 ↗
9. A.L. Ortiz, J.W. Tian, J.C. Villegas, L.L. Shaw, and P.K. Liaw: Acta Mater., 2008, vol. 56 (3), pp. 413–26.10.1016/j.actamat.2007.10.003 ↗
10. O. Unal and R. Varol: Appl. Surf. Sci., 2015, vol. 351, pp. 289–95.10.1016/j.apsusc.2015.05.093 ↗
11. T. Chen, H. John, J. Xu, Q. Lu, J. Hawk, and X. Liu: Corros. Sci., 2013, vol. 77, pp. 230–45.10.1016/j.corsci.2013.08.007 ↗
12. F. Yin, S. Hu, L. Hua, X. Wang, S. Suslov, and Q. Han: Metall. Mater. Trans. A, 2015, vol. 46A (3), pp. 1253–61.10.1007/s11661-014-2689-z ↗
13. U. Trdan, M. Skarba, and J. Grum: Mater. Charact., 2014, vol. 97, pp. 57–68.10.1016/j.matchar.2014.08.020 ↗
14. J.Z. Lu, K.Y. Luo, Y.K. Zhang, C.Y. Cui, G.F. Sun, J.Z. Zhou, L. Zhang, J. You, K.M. Chen, and J.W. Zhong: Acta Mater., 2010, vol. 58 (11), pp. 3984–94.10.1016/j.actamat.2010.03.026 ↗
15. X. Wu, N. Tao, Y. Hong, B. Xu, J. Lu, and K. Lu: Acta Mater., 2002, vol. 50 (8), pp. 2075–84.10.1016/S1359-6454(02)00051-4 ↗
16. A. Sandá, V. García Navas, and O. Gonzalo: Mater. Des., 2011, vol. 32 (4), pp. 2213–20.10.1016/j.matdes.2010.11.024 ↗
17. V. Singh and M. Marya: J. Mater. Eng. Perform., 2016, vol. 25 (1), pp. 338–47.10.1007/s11665-015-1829-y ↗
18. S. Kumar, G. Sudhakar Rao, K. Chattopadhyay, G.S. Mahobia, N.C. Santhi Srinivas, and V. Singh: Mater. Des., 2014, vol. 62, pp. 76–82.10.1016/j.matdes.2014.04.084 ↗
19. K. Dai and L. Shaw: Mater. Sci. Eng. A, 2007, vol. 463 (1–2), pp. 46–53.10.1016/j.msea.2006.07.159 ↗
20. Z. Zhou, A.S. Gill, A. Telang, S.R. Mannava, K. Langer, V.K. Vasudevan, D. Qian: Exp. Mech., 2014, vol. 54 (9), pp. 1597–11.10.1007/s11340-014-9940-9 ↗
21. K. Dalaei, B. Karlsson, and L.E. Svensson: Mater. Sci. Eng. A, 2011, vol. 528 (3), pp. 1008–15.10.1016/j.msea.2010.09.050 ↗
22. A. Evans, S. Kim, J. Shackleton, G. Bruno, M. Preuss, and P.J. Withers: Int. J. Fatigue, 2005, vols. 27 (10–12), pp. 1530–34.10.1016/j.ijfatigue.2005.07.027 ↗
23. J. Hoffmeister, V. Schulze, R. Hessert, and G. Koenig: Int. J. Mater. Res., 2013, vol. 103 (1), pp. 66–72.10.3139/146.110630 ↗
24. H. Nakamura, M. Takanashi, I. Yu, H. Kuroki, and Y. Ueda: Shot Peening Effect on Low Cycle Fatigue Properties of Ti-6Al-4V and Inconel 718, ASME 2011 Turbo Expo: Turbine Tech. Conf. Expos., Vancouver, British Columbia, Canada, 2011.10.1115/GT2011-46847 ↗
25. W. Liu, G. Wu, C. Zhai, W. Ding, and A.M. Korsunsky: Int. J. Plasticity, 2013, vol. 49, pp. 16–35.10.1016/j.ijplas.2013.02.015 ↗
26. Y. Estrin and A. Vinogradov: Acta Mater., 2013, vol. 61 (3), pp. 782–817.10.1016/j.actamat.2012.10.038 ↗
27. Y. Estrin, L.S. Tóth, A. Molinari, and Y. Bréchet: Acta Mater., 1998, vol. 46 (15), pp. 5509–5522.10.1016/S1359-6454(98)00196-7 ↗
28. B. Han, D.Y. Ju, and X.G. Yu: Mater. Des., 2010, vol. 31 (7), pp. 3317–23.10.1016/j.matdes.2010.02.004 ↗
29. L.F. Zeipper, M.J. Zehetbauer, and C. Holzleithner: Mater. Sci. Eng. A, 2005, vol. 410–411, pp. 217–21.10.1016/j.msea.2005.08.120 ↗
30. N. Miyazaki, H. Kutsukake, and A. Kumamoto: J. Cryst. Growth, 2002, vol. 243 (1), pp. 47–54.10.1016/S0022-0248(02)01455-0 ↗
31. P. Haasen: Zeitschrift für Physik, 1962, vol. 167 (4), pp. 461–67.10.1007/BF01378125 ↗
32. V. Lemiale, Y. Estrin, H.S. Kim, and R. O Donnell: Comp. Mater. Sci., 2010, vol. 48 (1), pp. 124–32.10.1016/j.commatsci.2009.12.018 ↗
33. D.J. Lee, E.Y. Yoon, D. Ahn, B.H. Park, H.W. Park, L.J. Park, Y. Estrin, and H.S. Kim: Acta Mater., 2014, vol. 76, pp. 281–93.10.1016/j.actamat.2014.05.027 ↗
34. H. Ding, N. Shen, and Y.C. Shin: Comp. Mater. Sci., 2011, vol. 50 (10), pp. 3016–25.10.1016/j.commatsci.2011.05.020 ↗
35. J. Kavosi, M. Saei, and M. Kazeminezhad: Comp. Mater. Sci., 2013, vol. 67, pp. 359–63.10.1016/j.commatsci.2012.09.020 ↗
36. B. Bhuvaraghan, and S.M. Srinivasan, B. Maffeo: Int. J. Mech. Sci., 2011, vol. 53 (6), pp. 417–24.10.1016/j.ijmecsci.2011.03.004 ↗
37. W. Cao, R. Fathallah, L. Castex: Mater. Sci. Tech.-Lond., 1995, 9 (11), 967.10.1179/mst.1995.11.9.967 ↗
38. D. Hu, Y. Gao, F. Meng, J. Song, Y. Wang, M. Ren, and R. Wang: Chinese J. Aeronaut., 2017, vol. 30 (4), pp. 1592–602.10.1016/j.cja.2016.11.005 ↗
39. S.M. Hassani-Gangaraj, K.S. Cho, H.J.L. Voigt, M. Guagliano, and C.A. Schuh: Acta Mater., 2015, vol. 97, pp. 105–15.10.1016/j.actamat.2015.06.054 ↗
40. S.M. Hassani-Gangaraj, A. Moridi, and M. Guagliano: From conventional to severe shot peening to generate nanostructured surface layer: a numerical study, 6th Int. Conf. Nanomater. Severe Plastic Deform., Metz, France, 2014.10.1088/1757-899X/63/1/012038 ↗
41. J. Xu, Z. Huang, and L. Jiang: Mater. Sci. Eng. A, 2017, vol. 690, pp. 137–45.10.1016/j.msea.2017.02.104 ↗
42. Hibbitt, Karlsson & Sorensen, Inc., ABAQUS/Standard User’s manual, vol. II, version 6.4.1, ABAQUS 6.13-1, 2013.
43. M. Frija, T. Hassine, R. Fathallah, C. Bouraoui, and A. Dogui: Mater. Sci. Eng. A, 2006, vols. 426 (1-2), pp. 173–80.10.1016/j.msea.2006.03.097 ↗
44. L. Xie, J. Zhang, C. Xiong, L. Wu, C. Jiang, and W. Lu: Mater. Des., 2012, vol. 41, pp. 314–18.10.1016/j.matdes.2012.05.024 ↗
45. G.R. Johnson and W.H. Cook: Eng. Fract. Mech., 1985, vol. 21 (1), pp. 31–48.10.1016/0013-7944(85)90052-9 ↗
46. P.J. Arrazola, A. Kortabarria, A. Madariaga, J.A. Esnaola, E. Fernandez, C. Cappellini, D. Ulutan, T. Özel, Simul. Model. Pract. Theory, 2014, vol. 41, pp. 87–103.10.1016/j.simpat.2013.11.009 ↗
47. S.M.H. Gangaraj, M. Guagliano, and G.H. Farrahi: Surf. Coat. Technol., 2014, vol. 243 (0), pp. 39–45.10.1016/j.surfcoat.2012.03.057 ↗
48. R. Lapovok, F.H. Dalla Torre, J. Sandlin, C.H.J. Davies, E.V. Pereloma, P.F. Thomson, and Y. Estrin: J. Mech. Phys. Solids, 2005, vol. 53 (4), pp. 729–47.10.1016/j.jmps.2004.11.006 ↗
49. P.W.J. Mckenzie, R. Lapovok, and Y. Estrin: Acta Mater., 2007, vol. 55 (9), pp. 2985–93.10.1016/j.actamat.2006.12.038 ↗
50. S.C. Baik, Y. Estrin, H.S. Kim, and R.J. Hellmig: Mater. Sci. Eng. A, 2003, vols. 351 (1–2), pp. 86–97.10.1016/S0921-5093(02)00847-X ↗
51. S. Bagherifard, I. Fernandez-Pariente, R. Ghelichi, and M. Guagliano: Int. J. Fatigue, 2014, vol. 65 (0), pp. 64–70.10.1016/j.ijfatigue.2013.08.022 ↗
52. D.J. Child, G.D. West, and R.C. Thomson: Acta Mater., 2011, vol. 59 (12), pp. 4825–4834.10.1016/j.actamat.2011.04.025 ↗