Effect of Aged Microstructure on the Strength and Work Hardening Behavior of Ti-15V-3Cr-3Sn-3Al Alloy
Source abstract
Abstract
This investigation is aimed at revealing the deformation behavior of a β-Ti alloy, namely Ti-15V-3Cr-3Sn-3Al, under various aged conditions with an emphasis on correlating the work hardening characteristics of the alloy with its corresponding microstructure. The alloy was cast, forged, hot rolled, solution treated, and aged differently to generate microstructures with varying amounts and morphologies of α- and β-phases. While microstructural characterization was carried out using scanning and transmission electron microscopy (TEM), tensile tests were conducted to study the work hardening behavior of the alloy. One may infer from the results that the strength of the alloy deteriorates, while the elongation to failure improves with an increase in the aging temperature. The strength of the alloy depends strongly on the amount of α- and the inter-α-spacing. The work hardening behavior of the alloy aged at temperatures below 808 K (535 °C) is markedly different than those aged at higher temperatures. This characteristic behavior has been explained using the deformation signatures in the α-phase revealed by TEM examinations. A stress gradient-based model and a dislocation evolution-type model are found to satisfactorily describe the strength and the work hardening behavior of the alloy aged under different conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Metallurgy and Material Forming · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. R.R. Boyer: Beta Titanium Alloys in the 1990’s, D. Eylon, R.R. Boyer, D.A. Koss, eds., TMS, Pennsylvania, 1993, p. 335.
2. P.J. Bania, G.A. Lenning, and J.A. Hall: Beta Titanium Alloys in the 1980’s, R.R. Boyer, H.W. Rosenberg, eds., The Metallurgical Society of AIME, Pennsylvania, 1984, p. 209.
3. O.M. Ivasishin, P.E. Markovsky, Y.V. Matviychuk, S.L. Semiatin, C.H. Ward and S. Fox: J. Alloy. Compd., 2008, vol. 457, pp. 296-309.10.1016/j.jallcom.2007.03.070 ↗
4. N. Niwa, A. Aral, H. Takator and K. Ito: ISIJ Int, 1991, vol. 31, pp. 856–62.10.2355/isijinternational.31.856 ↗
5. T. Inaba, K. Ameyama and M. Tokizane: ISIJ Int, 1991, vol. 31, pp. 792–98.10.2355/isijinternational.31.792 ↗
6. T. Makino, R. Chikaizumi, T. Nagaoka, T. Furuhara and T. Makino: Mater. Sci. Eng. A, 1996, vol. 213, pp. 51-60.10.1016/0921-5093(96)10236-7 ↗
7. M. Okada: ISIJ Int, 1991, vol. 31, pp. 834–39.10.2355/isijinternational.31.834 ↗
8. H. Fujii and H.G. Suzuki: Beta Titanium Alloys in the 1990’s, D. Eylon, R.R. Boyer, D.A. Koss, eds., TMS, Pennsylvania, 1993, p. 249.
9. J. Ma and Q. Wang: Mater. Sci. Eng. A, 1998, vol. 243, pp. 150–54.10.1016/S0921-5093(97)00793-4 ↗
10. M. Okada, D. Banerjee, and J.C. Williams: Titanium Science and Technology-Proceedings of the Fifth International Conference on Titanium Congress-Center, G. Lutjering, U. Zwicker, and W. Bunk, eds., FRG, Munich, 1984, pp. 1835–42.
11. Y. Kawabe and S. Muneki: ISIJ Int., 1991, vol. 31, pp. 785–91.10.2355/isijinternational.31.785 ↗
12. G. Qiang, W. Qing, S. Dong-Li, H. Xiu-Li and W. Gao-Hui: Mater. Sci. Eng. A, 2010, vol. 527, pp. 4229–32.10.1016/j.msea.2010.03.034 ↗
13. G. Lutjering and J.C. Williams: Titanium, 2nd ed., p. 16, Springer, Berlin, 2007.
14. D.C. Ludwigson: Metall. Trans., 1971, vol. 2, pp. 2825-28.10.1007/BF02813258 ↗
15. R.E. Reed-Hill, W.R. Cribb and S.N. Monteiro: Metall. Trans. A, 1973, vol. 4, pp. 2665-67.10.1007/BF02644276 ↗
16. Y. Tomita and K. Okabayashi: Metall. Trans. A, 1985, vol. 16, pp. 865-72.10.1007/BF02814837 ↗
17. R. Sarkar, P. Ghosal, T.K. Nandy and K.K. Ray: Phil. Mag., 2013, vol. 93, pp. 1936–57.10.1080/14786435.2013.765979 ↗
18. M.A. Meyers and E. Ashworth, Phil. Mag. A, 1982, vol. 46, pp. 737-59.10.1080/01418618208236928 ↗
19. J. G. Sevillano, P. V. Houtte and E. Aernoudt: Prog. Mater. Sci., 1980, Vol. 25, pp. 69-134.10.1016/0079-6425(80)90001-8 ↗
20. U.F. Kocks and H. Mecking, Prog. Mater. Sci., 2003, Vol. 48, pp. 171-273.10.1016/S0079-6425(02)00003-8 ↗
21. G.T. Terlinde, T.W. Duerig and J.C. Williams: Metall. Trans. A, 1983, vol. 14, pp. 2101-15.10.1007/BF02662377 ↗
22. M.F. Ashby: Strengthening Methods in Crystals, A. Kelly and R.B. Nicholson, eds., Applied Science Publishers Ltd., London, 1971, p. 137.
23. I. Gutierrez and M.A. Altuna: Acta Mater., 2008, vol. 56, pp. 4682-90.10.1016/j.actamat.2008.05.023 ↗
24. C. Mondal, A.K. Singh, A.K. Mukhopadhyay and K.Chattopadhyay: Mater. Sci. Eng. A, 2013, vol. 577, pp. 87–100.10.1016/j.msea.2013.03.079 ↗
25. Y. Estrin and H. Mecking: Acta Metall., 1984, vol. 32, pp. 57–70.10.1016/0001-6160(84)90202-5 ↗